Reliable 6200VB Handleiding

Bekijk gratis de handleiding van Reliable 6200VB (2 pagina’s), behorend tot de categorie Wasmachine. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.1 sterren uit 2 reviews. Heb je een vraag over Reliable 6200VB of wil je andere gebruikers van dit product iets vragen? Stel een vraag

CHIMNEY

CORD SUPPORT

PEDAL(S)

CHIMNEY

CORD SUPPORT

PEDAL(S)

VACUUM TABLE ASSEMBLY 6000VB/6200VB

These assembly instructions are based upon the 6200VB vacuum

table. Each vacuum table model varies slightly in design, but the

general assembly is the same for all.

GENERAL

1.Remove all packagingwrap from the vacuum table.

2.Confirm that you have the following loose parts:

CHIMNEY

CORD SUPPORT

PEDAL(S)

The6000VB has two pedals.

CHIMNEY

1.From the side of the vacuum tableremove the 2 BOLTS(use 8mm

wrench) and the 4 SCRE

WS(use Phillips head screw driver).

2.Using the 2 bolts and the 4 screws, attach the chimney (two people

may be needed for this task – one to hold the chimney and the other to

attach it with the supplied hardware).

CORD SUPPORT

1.Remove the bolt and 2 washers from the top of the vacuum table (a

small hole will now be visible).

2.Put 1 washer over the hole at the top of the vacuum table, place the

cord support base loop over the washer then layer the second

washer on top of the base loop.

Using the bolt by placing it through the washers and base loop,

securely fasten the cord support to the vacuum table.

PEDAL(S)

1.Insert the small tabs on the foot pedalplate into the small

corresponding slots on the base of the table.

BUCK POWER

(6200VB)

1.Open the outlet by lifting the locking flap firmly but carefully.

2.Insert the 4-pin plug attached to the buck.

.Firmly close the locking flap.

BUCK POWER

locking flap

screw

bolt

washer

4-pin plug

Product specificaties