Reef One Biorb Biube Handleiding

Bekijk gratis de handleiding van Reef One Biorb Biube (2 pagina’s), behorend tot de categorie Aquarium. Deze gids werd als nuttig beoordeeld door 25 mensen en kreeg gemiddeld 4.1 sterren uit 8 reviews. Heb je een vraag over Reef One Biorb Biube of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ENGLISH

UK 01603 710339

US 877-928-7333

FR 0811 850 113

DE 0800-181-9091

info@reef-one.com

www.reef-one.com

30L/8USGals=36Kg/80lbs

35L/9USGals=40Kg/88lbs

60L/16USGals=72Kg/160lbs

This guide will help you understand how

your aquarium works and how to create a

healthy environment for your fish. Please

read these instructions carefully before

filling your aquarium with water.

This is not a toy, adult supervision is

recommended. Removing the serial

number or dismantling your aquarium

will invalidate your guarantee.

L

L

LL

DO NOT MOVE

WHEN FULL

5

123

4

6

1. Carefully remove contents from the

box and check. Choose a suitable

location for your aquarium noting all

the advice above and place your

aquarium on a strong and level

surface. Remember the aquarium

needs a power source within reach.

2. Remove plastic wrapper from filter

cartridge (A) then offer up cartridge to

base of bubble tube (B), locate tabs

and twist in a counterclockwise

direction ensuring all cartridge tabs are

fully located. New cartridges are

available from a biOrb dealer.

3. Remove the light unit and lid from

the biOrb then take the bubble tube

and filter cartridge assembled in step 2

and insert into the biOrb. Turn the bubble

tube clockwise until it locks in position.

When correctly located, the bubble tube

and filter will remain in place.

4. Wash the ceramic media supplied

thoroughly before placing around the

filter body, ensuring none remains on top.

Use only ceramic media supplied, do not

use aquarium gravel. Discard any pieces

smaller than a pea.

5. Connect the airline to the pump as

shown and place in a suitable position.

Positioning the pump higher than the

aquarium water level will prevent water

leakage or damage to pump should

valve failure occur.

Setting up your aquarium

6. Plugthepumpandlightunitpluginto

theseparatesocketsonthetransformer

supplied,thenplugthetransformerinto

thepowersourceandturnon.Thepump

shouldbeleftrunning24hrsaday,only

switchitoffduringfiltercartridge

changesandcleaning.

7. Filltheaquarium with tapwaterto

approximately3”/7.5cm abovethetop

of thebubbletube and addWater

Conditioner.Leave the aquarium

runningforatleast 24 hours before

addingBiological Booster andthenyou

will bereadyto add your firstfish.Do

not immersethe light unit inwater.

DONOTPLACEONOR

NEARELECTRICALITEMSAVOID

HOTAREASAVOID

SUNLIGHT

7

3’’- 7.5cm

Product specificaties