RDL D-TPS7A Handleiding

RDL Niet gecategoriseerd D-TPS7A

Lees hieronder de 📖 handleiding in het Nederlandse voor RDL D-TPS7A (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Twisted Pair Format-A
Modules D-TPS7A & D-TPP7A
Modules DS-TPS7A & DS-TPP7A
Format-A Passive Single Pair Sender
RDL
659 6
th
St.
Prescott, AZ., USA 86301
(928) 443-9391
FAX (928) 443-9392
www.rdlnet.com
Stereo Audio Input Combined to Mono Output
Input on Mini-jack
Switch Selects which RJ45 Pair (A, B or C) is Fed
Signal and Power Pair Pass-Through between TP CABLE RJ45 Jacks
Passive Circuitry Does Not Require Power
Galvanic Isolation through a Studio-Quality Transformer
Daisy-Chain with Single-Pair or Two-Pair Format-A Senders
The -TPS7A is a single-pair audio sending module compatible with RDL
®
Format-A twisted pair products. The front panel
features a single stereo mini-jack intended for stereo consumer line level audio sources. A studio-quality transformer
provides isolation between the audio source and the RJ45 TP CABLE.
The -TPS7A is a single-pair sender, feeding the input signal to the cable pair set on the rear-panel
switch during installation. This module drives only one cable pair, therefore a TP CABLE RJ45 jack is
provided to accept signals and power from other mic-level or line-level Format-A senders. Two other
single-pair senders may be chained to a TP CABLE jack, or a single two-pair sender may be
connected. If three single-pair senders are connected together, each sender must feed a different
pair: A, B or C. The -TPS7A must be set to feed pair A if it is connected together with an RDL two-pair
sender that feeds stereo audio on pairs B and C.
The -TPS7A is a passive module that does not require power to operate. If power is present on a
cable connected to a TP CABLE jack, that power is passed through to the modules connected to the
other TP CABLE jack.
The D-TPP7A is the same as the D-TPS7A but includes a connection for composite video pass through.
D-TPS7A or DS-TP76A Format-A Audio Sender
Video Monitor Pass-Through
Available in RDL White/Gray (D-TPP7A)
Available in Stainless Steel (DS-TPP7A)
D-TPS7A
DS-TPS7A DS-TPP7A D-TPP7A
STEP 1: Set the PAIR selector so the module is driving the desired pair A, B or C of the Format-A cable. If the module is connected
together with one or two other single-pair senders, each sender must be set to a different pair. If connected together with a
two-pair
sender, the switch must be set to pair A.
STEP 2: Connect a high-impedance unbalanced audio source to the input (-10 dBu 3.5 mm mini-jack).
STEP 3: Connect the twisted pair cable(s) and mount the module.
TWISTED PAIR Format-A
Model D-TPS7A & D-TPP7A
Model DS-TPS7A & DS-TPP7A
Format-A Passive Single-Pair Sender
Installation/Operation
Declaration of Conformity available from rdlnet.com.
Sole EMC specifications provided on product package.
Specifications are subject to change without notice.
Radio Design Labs Technical Support Centers
U.S.A. (800) 933-1780, (928) 778-3554; Fax: (928) 778-3506
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287
891-4645A
TYPICAL PERFORMANCE
Input: 3.5mm mini-jack, unbalanced stereo combined to mono
Input Level: -10 dBV, +22 dBu max
Format-A Signal Pair Used: Switch-selectable A, B, or C (rear-panel switch)
Format-A Input: RJ45 TP CABLE
Output: RJ45 TP CABLE, RDL TP Format-A
Frequency Response: 20 Hz to 20 kHz (±0.5 dB)
THD: < 0.1% (50 Hz to 20 kHz); <0.001% (1 kHz typ)
Power Requirement: Passive
Dimensions: 1.6” (4.06 cm) W; 4.11” (10.45 cm) H; 1.89” (4.8 cm) D
(1) + White / Green
(2) – Green
(3) + White / Orange
(4) – Blue
(5) + White / Blue
(6) – Orange
(7) + White / Brown
(8) – Brown
Pair A: Audio +4 dBu
Pair B: Audio +4 dBu
Pair C: Audio +4 dBu
Pair D: Power +24 Vdc
Tab on bottom of connector
RJ45 Standard wiring
RJ45 conductor colors shown are for 568A standard. The 568B standard may be used if the connectors at both ends of the cable are wired identically.

Product specificaties

Merk: RDL
Categorie: Niet gecategoriseerd
Model: D-TPS7A

Heb je hulp nodig?

Als je hulp nodig hebt met RDL D-TPS7A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd RDL

RDL

RDL D-BT1A Handleiding

8 Januari 2024
RDL

RDL TX-TPR1A Handleiding

8 Januari 2024
RDL

RDL ST-LCR1 Handleiding

27 Juni 2023
RDL

RDL DDS-RN40 Handleiding

19 April 2023
RDL

RDL DDB-RN31 Handleiding

27 Maart 2023
RDL

RDL DDB-BTN44 Handleiding

4 Maart 2023
RDL

RDL DDB-RN40 Handleiding

30 Januari 2023
RDL

RDL DD-RN40 Handleiding

18 Januari 2023
RDL

RDL TX-TPR2A Handleiding

13 November 2022
RDL

RDL DDS-RN31 Handleiding

8 November 2022

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024
Sony

Sony PDW-U4 Handleiding

26 April 2024
Sony

Sony NXL-FR318 Handleiding

26 April 2024