Quoizel Darius DRS1911EK Handleiding
Quoizel
Verlichting
Darius DRS1911EK
Bekijk gratis de handleiding van Quoizel Darius DRS1911EK (3 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.4 sterren uit 1.5 reviews. Heb je een vraag over Quoizel Darius DRS1911EK of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/3
1of3
For Style DRS1911EK
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Please go to for product cleaning tips. Go to the selection.
(1)A21 Medium Base Bulb 150W Maximum, Medium Base Vintage Bulb is recommended, bulb not included.
Minimum Hanging Height is 23”, Maximum Hanging Height is 120”.
30-45 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to ensure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact your original place of purchase.
www.quoizel.com Care + Maintenance
Light Source:
Fixture Hanging Height:
EstimatedAssembly Time:
Preparation:
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Installation Guide #IS-DRS1911EK
2019 QuoizelInc.
ReleasedDate:2019-03-15
visit us on-line at www.quoizel.com
Hardware Contents
AA
Crossbar
Assembly
x 1
BB
CC
Ceiling
Canopy
x 1
Fixture Chain
x 1
Quick Link
x 2
DD
Package Contents
A
Fixture Body
x 1
C
B
D
Tab
x 4
Glass Panel
x 4
Fixture Loop
x 1
STEP 1 Remove Arm and Cage-
A. Unlock lock balls in the bottom edge
of the cage and remove the arm from
the Fixture Body (D).
B. Unscrew screws on the top edge of
the cage and remove the cage from
the Fixture Body (D).
D
Figure 2
STEP 2 Install Bulb-
A. Insert the bulb onto the socket
and screw snugly into place.
Socket
Vintage Bulb
(recommended
but not included)
Figure 1
Arm
Screw
Cage
Lock Ball
STEP 3 Install Glass Panels-
A. Place the Glass Panel (C) into the slot in the bottom edge of the
cage. Secure the Glass Panel (C) by pressing the Tab (B) onto the
top edge of the Glass Panel (C) and the slot on the top edge of the
cage.
C
B
Slot
Slot
Figure 3
Cage
2of3
2019 QuoizelInc.
ReleasedDate:2019-03-15
visit us on-line at www.quoizel.com
Green Ground Screw
on the Crossbar
White wire
from outlet box
Supply wire from fixture
identified with the Label “N”
Black wire from
outlet box (or Red)
Supply wire from fixture
identified with the label “L”
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
STEP 7 - Making the Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into outlet box.
Note: If the electrical wire is going to be cut shorter than provided
you will need to identify the "L" line wire and the "N" neutral wire
before you cut the excess wire off. One is labeled N and the other
labeled L. To do this separate the "L" line wire and the "N" neutral
wire as far as you need to. Re-label the wire near where you want to
make the cut. Be sure to mark the wire on the side of the fixture and
not on the excess wire being cut and removed.
Figure 7
STEP 4 Install Fixture Body and
Arm to Cage
-
A.
D
Place the cage over the bulb, attach
to the fixture hood on the Fixture
Body ( ) and secure with previously
removed screws. Hand tighten until
snug with screwdrivers.
B. Place bolts on the bottom end of the
arm to holes on the bottom edge of
the cage and secure with previously
removed lock balls. Hand tighten
until snug.
C. Pass the nipple on the Fixture Loop
(A) through the hole on the top of the
arm and thread it onto the top center
of the Fixture Body (D). Hand tighten
until snug.
D
Figure 4
Bolt
Hole
A
Arm
Screw
Cage
Lock Ball
STEP 5 -Install the Crossbar Assembly to Outlet Box and Adjust
the length of the Nipple
A. Attach the Crossbar Assembly (AA) to the Outlet Box with the head
of the Green Ground Screw facing you. Secure it with Outlet Box
Screws (not included), tighten until snug
B. Adjust the hex nut and lock washer underside of the crossbar to the
middle of the nipple.
C. Remove the canopy lock ring from the canopy chain loop. Place the
Ceiling Canopy (DD) over the canopy chain loop against the ceiling
to determine the correct position of the nipple. Thread the canopy
lock ring onto the canopy chain loop. Adjust the nipple to allow the
Ceiling Canopy (DD) to rest against the ceiling when held in place
by the canopy lock ring.
D. Remove the canopy lock ring and the Ceiling Canopy (DD). Tighten
the lock washer and the hex nut against the crossbar to secure in
place.
.
Outlet Box Screw
(not included)
Hex Nut and
Lock Washer
Outlet Box
Green Ground Screw
Canopy Chain Loop
Canopy Lock Ring
Nipple
DD
AA
Figure 5
STEP 6 - Install the Fixture Chain and Ceiling Canopy
A. Adjust the Fixture Chain (BB) to your desired length by removing
links if needed. Put a cloth over the Fixture Chain (BB) to protect the
finish.
B. Pull the supply wires through the Fixture Chain (BB) alternating
links. After the wires are through the Fixture Chain (BB), pull the
Supply Wires and the Ground Wire through the canopy lock ring and
the Ceiling Canopy (DD) in order.
C. Attach one end of the Fixture Chain (BB) to the fixture loop with one
Quick Link (CC). Lift the fixture and Fixture Chain (BB) up and attach
the other end of the Fixture Chain (BB) onto the canopy chain loop
with another Quick Link (CC). The fixture will now hang safely.
Nipple
Fixture
Loop
Supply
Wires and
Ground Wire
Canopy
Chain Loop
Canopy
Lock Ring
CC
BB
DD
CC
Figure 6
(Step 6 Continued)
D. Feed the Supply Wires
and Ground Wire through
the canopy chain loop
and nipple into the outlet
box. Cut the wires
leaving approximately 8”
of wire extending from
the Outlet Box.
E. Go to Step 7 for wire
connections and follow
the directions. Return to
Step F in this step when
complete with Step 7.
F. Raise the Ceiling Canopy
(DD) and canopy lock
ring up the Fixture Chain
(BB) and over the canopy
chain loop. Tighten the
canopy lock ring onto the
canopy chain loop until
tight.
Suggested chain length
for Ceiling height :
8’ ceiling : use 11 link of
chain and 2 quick links
9’ ceiling : use 21 links of
chain and 2 quick links
10’ ceiling : use 31 links
of chain and 2 quick links
HOW TO REPLACE GLASS PANEL
A. Remove the fixture loop from the fixture body.
B. Refer to Step 1 to remove the arm and the cage from the fixture body.
B. Refer to Step 3 to replace the glass panel.
C. Refer to Step 4 to reinstall the cage, the arm and the fixture loop to
the fixture body.
3of3
2019 QuoizelInc.
ReleasedDate:2019-03-15
visit us on-line at www.quoizel.com
DRS1911EK
FINISH: EARTH BLACK
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4"
11.25”
9.5”
5” SQ.
120”
18.75”
TOP VIEW
Product specificaties
| Merk: | Quoizel |
| Categorie: | Verlichting |
| Model: | Darius DRS1911EK |
Heb je hulp nodig?
Als je hulp nodig hebt met Quoizel Darius DRS1911EK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Verlichting Quoizel
1 April 2025
1 April 2025
30 September 2024
30 September 2024
30 September 2024
30 September 2024
30 September 2024
30 September 2024
30 September 2024
30 September 2024
Handleiding Verlichting
- COLBOR
- Aquatlantis
- LG
- Underwater Kinetics
- Botex
- Tiger
- Livarno
- All Solar Lights
- Theben
- Innr
- Hinkley Lighting
- Stairville
- Dymond
- Integral LED
- Ring
Nieuwste handleidingen voor Verlichting
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025