QTX XCAB-15 Handleiding

QTX Speaker XCAB-15

Lees hieronder de 📖 handleiding in het Nederlandse voor QTX XCAB-15 (8 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

MIXCAB- 15

15” Portable Mixer PA

MIXCAB- 178.971UK 15:

XCAB-15

15” Extension Cabinet

XCAB-15: 178.972UK

VERSION 1 1.

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

MIXCAB- XCAB-15 User Manual15

Introduction

Thank you for choosing MIXCAB- portable PA unit. This versatile portable PA unit offers a a 15

full set of PA features in a rugged and portable enclosure. Operated as a standalone unit or

with the passive XCAB-15, this portable PA delivers an output power normally only possible

from mains powered speakers and has inputs for multiple performers as a band PA system.

Package Contents

Please check the contents to ensure that the product has been received in good condition.

If you find any accessory is missing or the product has arrived with any problems, please

contact your retailer at once.

• MIXCAB- mixer PA unit 15

• Media player remote control

• IEC power lead(s)

(all above not applicable to XCAB-1 5)

This product contains no user-serviceable parts so make no attempt to try to fix or modify this

item yourself as this will invalidate the warranty. We recommend you keep the original

package and proof of purchase for any possible replacement or returned demand.

Warning

To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture.

To prevent electric shock do not remove the cover. No user serviceable parts inside. Refer

servicing to qualified service personnel.

Safety

Prior to connecting mains, check the supply voltage is correct and the IEC mains lead is OK.

Avoid ingress of water or particles into the enclosure.

If the internal IEC fuse blows, refer the unit to qualified service personnel

If the UHF microphones are to be unused for a long period of time, remove the batteries and

store for later use.

Placement

Keep the unit out of direct sunlight and away from heat sources.

Place the unit in an upright position during use and storage.

Keep the unit away from moisture or dusty environments.

Cleaning

Use a soft cloth with a neutral detergent to clean the cabinet, rear panel and controls.

To avoid damage, do not use solvents to clean this equipment.

MIXCAB- , XCAB-15 User Manual15

MIXCAB- Rear Panel 15

Power connection and internal battery

Your new MIXCAB- unit may arrive with you with t internal battery charged. 15 he

Before connecting to the mains, turn down all volume controls ( , 20 23) a switch the unit 17 , nd

on ( and check the battery level indicators (25). If the battery level is low or if no LEDs 26)

light at all, you will need to charge the battery befor operating away from mains power. e

Connect the MIXCAB- unit to the mains (27) using the appro iate mains IEC lead supplied. 15 pr

You may otherwise opt to connect the DC input at the rear ( to an external 12- Vdc 14) 15

supply car battery) or use the internal battery if charged. (e.g

If the POWER switch is in the off position ilst the unit is connected to the mai , the “ ” wh ns

internal battery will be re-charged from the mains supply. The battery status LEDs will be off

and the CHA LED will light red when charging or green when fully charged. “RGING”

Note: it is recommended to store the PA unit at an ambient temperature and not with the

battery fully discharged.

SD card slot

USB port

CH.1 input XLR/jack

CH.1 Mic/Line level select or

C 2 input XLR/jack H.

C 2 Mic/Line level select H. or

C 3 input XLR/jack H.

C 3 Mic/Line level select H. or

CH.4 line input L+R RCA

10.

CH.4 input stereo 3.5mm jack

11.

Line output L+R RCA

12.

Echo effect on/off selector

13.

Echo effect master volume

14.

12Vdc power input safety fuse &

15.

Speaker output (XCAB- ) 15

16.

Media player display

17.

Media player volume

18.

Media player controls

19.

CH.1-4 echo effect controls

20.

CH.1-4 volume controls

21.

CH.1-4 treble EQ controls

22.

CH.1-4 bass EQ controls

2 3.

Master volume

2 4.

Master mono/stereo switch

25.

Battery charging/level indicators

26.

Power on ff switch /o

27.

IEC mains inlet & fuse holder

Product specificaties

Merk:	QTX
Categorie:	Speaker
Model:	XCAB-15
Kleur van het product:	Zwart
Gewicht:	13180 g
Breedte:	680 mm
Diepte:	445 mm
Hoogte:	370 mm
Gemiddeld vermogen:	150 W
Draaghandvat:	Ja
Aantal per verpakking:	- stuk(s)
Impedantie:	4 Ohm
Geschikt voor buitengebruik:	Ja
Speaker plaatsing:	Vloer
Frequentiebereik:	45 - 18000 Hz
Luidspreker soort:	2-weg
Diameter woofer:	15 "
Geluidsdruk niveau (max):	136 dB