QTX Gobo Fireflash Handleiding

QTX Verlichting Gobo Fireflash

Lees hieronder de đź“– handleiding in het Nederlandse voor QTX Gobo Fireflash (4 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
www.avsl.com 151.742UK User Manual
G o Fireflash ob
4 in 1 LED and Laser Effect light
Item ref: 151.742UK
User Manual
Thank you for choosing the QTX Gobo Fireflash LED and Laser Effect Light. A compact and robust metal
4- -1 light effect, combining 6 moving colour gobos, 3 colour Effect ball, a 20W White Strobe LED and in
Dual colour Laser in a compact and convenient package. Easy Setup with auto-run, sound activation and
14 Channel DMX control.
In the box:
Your Gobo Fireflash should arrive with you in a single carton in good condition. T carton should contain he
1 x main unit with bracket, 1 x UK IEC mains lead and 1 x manual.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the mains and al w the unit to dry out naturally. Qualified personnel should then lo
check the unit before continuing use.
Please read rough this manual thoroughly before use, any dama th ge
Cause by misuse of product will not be covered by warrantd y.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 151.742UK User Manual
Caution: Laser radiation
Avoid pointing directly towards eyes. Laser output can cause injury if viewed directly.
This product is a Class 3B laser and should only be installed and used by persons who
are trained in the management of laser radiation and are able to operate in accordance
within the guidance given by the Health and Safety Executive (HSE) in HS(G)95: “The
Radiation Safety of Lasers used for Display purposes”. Copies of this guide can be
downloaded from: www.avsl.com/assets/documents/hsg95.pdf
Placement:
• Use the included mounting bracket to fix to a stand or lighting trus s
• Use secondary safety fixings if mounting overhead.
• Keep away from damp or dusty environments
• Ensure adequate air- ow around the fixture housings fl
• Ensure adequate access to controls and connections
• Do not aim LED or laser output directly into line of sight, as this can result in eye injury.
Cleaning:
• Use a soft cloth with a neutral detergent to clean the casing as required
• Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
• Do not use strong solvents for cleaning the unit
Rear panel controls:
1. IEC mains in
2. Laser key
3. DMX signal in
4. DMX signal out
5. Earth screw (DO NOT
REMOVE)
6. Manual control buttons
7. LCD display
Manual control menu:
Press the “ ” buttoMENU n to enter the settings menu.
Press “ ” and “UP DOWN” buttons to navigate through various setting functions .
P button confirm the desired setting. ress “ENTER” to
2.
1.
3.
4.
5.
6.
7.
www.avsl.com 151.742UK User Manual
Menu
Description
A001
DMX address settings
A1
Auto-run mod - slow to fast e
S1
Sound activation mode 1 less to more sensitive –
S2
Sound activation mode 2 less to more sensitive–
DMX mode:
The Gobo Fireflash can be controll by DMX signal, simply connect the DMX signal source the DMX ed to
input on the unit a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by vi a
looping through the DMX out on the To enter DMX mode, select A001 from the menu and counit. nfirm
the correct start address using the and buttons and The A on the LED by “ ”UP “ ”DOWN “ ”ENTER .
display will begin to flash once it s received the DMX signal from the controller. This unit has 14 DMX ’
channels as indicated in the table below:
Channel
Function
DMX Val ue
Description
1
Motor
0-255
0-9 no rotation, 10-127 forward rotation from slow
to fast, 128-255 reverse rotation fast to slow
2
Master dimmer
0-255
Linear dimmin rom low to high g f
3
Stro be
0-9
None
10-255
Slow to fast
4
RP Gobo
0-255
Red d pink gobos from low to high an
5
G Gobo
0-255
Green gobos from low to high
6
BY Gobo
0-255
Blue and yellow gobos from low to high
7
W Go bo
0-255
White gobo from low to high
8
R Mirr or
0-255
Red mirrorball from low to high
9
G Mirror
0-255
Green mirrorball from low to high
10
B Mirror
0-255
Blue mirrorball from low to high
11
R Laser
0-255
Red laser show on/off
12
G Laser
0-255
Green laser show on/ off
13
W Strobe
0-255
White strobe slow to fast
14
Macro Mode
0- 50
Bla nk
51-255
Autorun full program
Specifications:
Power pply su
110-240Vac, 50/60Hz (IEC)
Power consumption
50W
Fuse rating
F2AL, 5x20mm
Light source
Gobo 6x3W RGBPYW, Ball 3x3W RGB, Strobe
20W, Laser 120mW-red & 30mW-green
DMX channels
14
Dimensions
130x180x140mm (Without bracket)
Weight
1.4 kg
Troubleshooting:


Product specificaties

Merk: QTX
Categorie: Verlichting
Model: Gobo Fireflash

Heb je hulp nodig?

Als je hulp nodig hebt met QTX Gobo Fireflash stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Verlichting QTX

QTX

QTX Wash & Beam Handleiding

4 September 2023
QTX

QTX TetraCube Handleiding

4 September 2023
QTX

QTX BATPAR-18W Handleiding

4 September 2023
QTX

QTX TinyMover Handleiding

4 September 2023
QTX

QTX Recharge DJ Handleiding

4 September 2023
QTX

QTX Multi-Bar Handleiding

4 September 2023
QTX

QTX SpectraWash Handleiding

4 September 2023
QTX

QTX DP4 Handleiding

20 Juni 2023
QTX

QTX MBM-1 Handleiding

18 Juni 2023

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting