QSC AcousticDesign AD-S32T Handleiding

QSC Speaker AcousticDesign AD-S32T

Lees hieronder de 📖 handleiding in het Nederlandse voor QSC AcousticDesign AD-S32T (70 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/70
AcousticDesign™ Series
User Guide
AD-S6T – 6" two-way , foreground/background loudspeaker with 70/100V transformer
AD-S8T – 8" two-way, foreground/background loudspeaker with 70/100V transformer
AD-S10T – 10" two-way, foreground/background loudspeaker with 70/100V transformer
AD-S12 – 12" two-way, foreground/background loudspeaker
AD-S112sw – 12" direct-radiating subwoofer
TD-000329-00-C
*TD-000329-00*
2
EN
TD-000329-00-C
EXPLANATION OF SYMBOLS
The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.
The term “ ” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in CAUTION!
damage to the equipment that may not be covered under the warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of the procedure.
The term " " is used to indicate additional useful information.NOTE
NOTE:
The intent of the lightning ash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated
"dangerous" voltage within the product's enclosure that may be of suffi cient magnitude to constitute a risk of electric shock to humans.
NOTE:
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and
operating and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!:
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
WARNING!:
While it is possible for one person to lift a loudspeaker, it is important to use proper lifting techniques. Suggested
reading: OSHA Technical Manual on Back Disorders and Injuries
(http://www.osha.gov/dts/osta/otm/otm_vii/otm_vii_1.html#app_vii:1_2).
Keep these instructions.
Heed all warnings.
Follow all instructions.
Clean only with a dry cloth.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli ers) that produce heat.
Only use attachments/accessories specifi ed by the manufacturer.
Refer all servicing to quali ed service personnel.
Adhere to all applicable, local codes.
Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
Introduction
AcousticDesign series is a line of premium surface-mount loudspeakers intended for permanent installation applications. Housed in rugged ABS
molded enclosures, each loudspeaker (except the AD-S12 and AD-S112sw) features a 70/100V transformer for use with distributed-audio lines. The
unique X-Mount™ Bracket and Euro-style connector, supplied with each AcousticDesign loudspeaker, are designed for maximum fl exibility and a quick
install. Featuring a knurled ball-mount and discrete angle deployment marks, installers can set loudspeaker deployment angles quickly and securely.
The Euro-style connector allows pre-wiring of the system and when combined with the quick “snap-on” deployment of the loudspeaker to the mount,
installation is completed in a fraction of the time required versus competitive models.
Unpacking
Package Contents
1. Quick-Start Guide
2. AcousticDesign Loudspeaker
3. Euro-style Connector, 4-pin
4. Terminal Weather Protection Cover
5. Phillips Screws (4) M4 (Terminal Weather Protection Cover)
6. X-Mount™ Bracket (Yoke Mount for AD-S112sw)
3
EN
TD-000329-00-C
Set the Transformer Tap Switch
Refer to — Figure 1
1. Insert a 4mm fl at-tip screwdriver into Transformer Tap hole
and engage the slot.
2. At fully clockwise the transformer is in 8 -bypass.
AD-S10T
AD-S6T, AD-S8T
Mount the Loudspeakers
Install the BracketX-Mount™
Refer to — Figure 4
WARNING!:
Install the system in accordance
with local building codes and regulations. Use
a licensed contractor or professional engineer.
QSC Audio Products is not responsible for
damages resulting from the negligent
installation of any bracket or loudspeaker.
1. Mount to a surface capable of supporting the weight of
the loudspeaker.
— Figure 1 —
4mm
100 Volt 70 Volt
8 8 Ω Ω
N/A 100W
100W 50W
50W 25W
25W 12.5W
— Table 1 —
— Figure 2 —
100 Volt 70 Volt
8 8 Ω Ω
N/A 60W
60W 30W
30W 15W
15W 7.5W
— Table 2 —
— Figure 3 —
— Figure 4 —


Product specificaties

Merk: QSC
Categorie: Speaker
Model: AcousticDesign AD-S32T

Heb je hulp nodig?

Als je hulp nodig hebt met QSC AcousticDesign AD-S32T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker QSC

Handleiding Speaker

Nieuwste handleidingen voor Speaker