Pyle PSLSW6 Handleiding
Bekijk gratis de handleiding van Pyle PSLSW6 (8 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 25 mensen en kreeg gemiddeld 5.0 sterren uit 13 reviews. Heb je een vraag over Pyle PSLSW6 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8
PSLSW4 - PSLSW6
Multi-Zone Speaker Selector
www.PyleUSA.com
2
PSLSW4 - PSLSW6 lets you connect up to four (PSLSW4) or six ( PSLSW6) separate
pairs of speakers to your stereo receiver/amplier. The control center is especially
convenient if you have speaker sets in dierent rooms and want to turn them on
and o independently. You can enjoy the convenience and exibility of listening
to multiple speaker pairs simultaneously.
The control center lets you use one to four (PSLSW4) or six (PSLSW6) sets of
speakers at a time, and is designed to operate with a stereo receiver/amplier
that has a maximum of 100 watts per channel, and with speaker systems that
have a minimum impedance of 8 ohms (see “ ” on page 6)Impedance Chart
PREPARATIONS
•
Use the PYLE Speaker Selectors only with ampliers rated at 100 watts per
channel or less.
•
Your PYLE Speaker Selector is designed to accept any size cable up to 14 gauge
non-terminated speaker wire. If you're using non-terminated speaker wire, do
not use any speaker wire that is larger than 14 gauge. The lower the gauge
number, the larger the cable (e. g: 12 gauge is larger in actual physical size
than 14 gauge).
•
Do not hook the outputs of one selector into the inputs of another speaker
selector together.
•
Before you connect the AC power source, make sure you set ALL speakers ON/
OFF to OFF.
•
Left and right "commons" are isolated to work with all types of ampliers.
•
Auto transformer impedance protection.
PSLSW4 Front and Back Panels
www.PyleUSA.com
3
PSLSW6 Front and Back Panels
OPERATION
1. Speakers ON/OFF Button
Press button to turn all speaker pairs. Press again button out to turn o.ON
2. Amplier A/B Selector Button
Press button to select amplier A and B
3. Volume Controls
Turn the control knob clockwise to increase the volume and counter-clockwise
to decrease or o.
4. Speaker Connections
The control center divides the power from your receiver/amplier dierently to
its speaker terminals. (This is especially noticeable when you connect only one
pair of speakers. If you connect more than one pair of speakers, see “Impedance
Chart" on page 6 to selector the best terminals to connect. ) For the best
performance, make the connections based on how frequently you use each
set of speakers.
Cautions: To avoid damaging your speakers or receiver/amplier:
•
Be sure your receiver/amplier's power is turned o before you make the
connections.
•
Never let the speaker wire's bare ends touch each other or adjacent terminals
on the control center.
•
Do not connect more than one pair of speaker to each set of terminals.
Product specificaties
| Merk: | Pyle |
| Categorie: | Speaker |
| Model: | PSLSW6 |
Heb je hulp nodig?
Als je hulp nodig hebt met Pyle PSLSW6 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Speaker Pyle
15 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
Handleiding Speaker
- Heco
- Lenoxx
- Airpulse
- Roswell
- Logic3
- Geneva
- Roadstar
- Harley Benton
- Party Light & Sound
- Ewent
- Quad
- Samson
- Digitus
- Krüger And Matz
- Monitor Audio
Nieuwste handleidingen voor Speaker
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025