Pyle PGTAMPL150 Handleiding
Pagina's 2 Engels Receiver
Bekijk de handleiding van Pyle PGTAMPL150 gratis online of download de PDF. Deze handleiding is 52 keer bekeken. Vraag over dit model? Stel een vraag
40 Watt Guitar Amplifier
8'' Speaker with Volume, Bass, Treble,
Gain and Digital Reverb Controls
IMPORTANT SAFETY INSTRUCTIONS
WARNING:Before going any further, make sure that your amplier is compatible
with your mains electricity supply.
1. Ensure that the (power) switch is set to the position.MAINS OFF
2. Connect the supplied mains (power) lead into the mains electricity supply.
3. Ensure that the VOLUME controls are set to zero.
4. Plug your guitar into an jack socket.INPUT
5. Turn the front panel switch to the position.MAINS ON
6. Turn the VOLUME up to your preferred level and your amplier is ready to play.
Function
1-2. INPUT: Input for your guitar. Use a good quality guitar cable (i.e. one that’s
screened/shielded) to help prevent noise, interference and unwanted feedback.
3. GAIN: This control sets the operating level of the pre-amp. Simply turn up the Gain
control until the required amount of distortion is achieved.
4. Select the drive channel or normal channel.SELECT:
5. Increasing the Treble will make your sounds brighter and more cutting, TREBLE:
turning it down will decrease your tone’s edge and make it sound softer as a result.
6. Adjusts the sound level of middle-frequency range.MIDDLE:
7. Adjusts the sound level of the low-frequency range.BASS:
8. This equalization controls reverb lengthLENGTH:
9. This equalization controls reverb depthDEPTH:
10. VOLUME:This is the overall level control for the normal channel.
www.PyleUSA.com
1 2354 6 7 8 910111213
Product specificaties
| Merk: | Pyle |
| Categorie: | Receiver |
| Model: | PGTAMPL150 |
Heb je hulp nodig?
Als je hulp nodig hebt met Pyle PGTAMPL150 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden