Pyle PGTAMPL100 Handleiding

Bekijk gratis de handleiding van Pyle PGTAMPL100 (2 pagina’s), behorend tot de categorie Receiver. Deze gids werd als nuttig beoordeeld door 111 mensen en kreeg gemiddeld 5.0 sterren uit 2 reviews. Heb je een vraag over Pyle PGTAMPL100 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

30 Watt Guitar Amplifier

8'' Speaker with Volume, Bass, Treble,

Gain and Digital Reverb Controls

IMPORTANT SAFETY INSTRUCTIONS

WARNING:Before going any further, make sure that your amplier is compatible

with your mains electricity supply.

1. Ensure that the (power) switch is set to the position.MAINS OFF

2. Connect the supplied mains (power) lead into the mains electricity supply.

3. Ensure that the VOLUME controls are set to zero.

4. Plug your guitar into an jack socket.INPUT

5. Turn the front panel switch to the position.MAINS ON

6. Turn the VOLUMEup to your preferred level and your amplier is ready to play.

Function

1-2. HIGH and LOW INPUT: Input for your guitar. Use a good quality guitar cable

(i.e. one that’s screened/shielded) to help prevent noise, interference and

unwanted feedback.

3. GAIN: This control sets the operating level of the pre-amp. Simply turn up the Gain

control until the required amount of distortion is achieved.

4. Select the drive channel or normal channel.SELECT:

5. Increasing the Treble will make your sounds brighter and more cutting, TREBLE:

turning it down will decrease your tone’s edge and make it sound softer as a result.

6. Adjusts the sound level of middle-frequency range.MIDDLE:

7. Adjusts the sound level of the low-frequency range.BASS:

8. This equalization controls reverb lengthLENGTH:

9. This equalization controls reverb depthDEPTH:

10. VOLUME:This is the overall level control for the normal channel.

www.PyleUSA.com

1 235

467891011 1213

Product specificaties