Pyle PDA20BT Handleiding
Bekijk gratis de handleiding van Pyle PDA20BT (6 pagina’s), behorend tot de categorie Receiver. Deze gids werd als nuttig beoordeeld door 53 mensen en kreeg gemiddeld 4.9 sterren uit 27 reviews. Heb je een vraag over Pyle PDA20BT of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/6
Desktop Wireless BT Audio Amplifier
PDA20BT
Compact Mini Blue Series Stereo Power Amplier
(2 x 100 Watt MAX)
www.PyleUSA.com
2
Read through this user manual before using the product to ensure
its correct use. Keep this manual for future reference.
Quick Setup:
Front Panel
Rear Panel
1. Main Power ON Switch: Switch ON/OFF the amplier by using this switch.
2. Adjust to boost or cut HIGH frequencies.TREBLE KNOB:
3. Adjust to boost or cut LOW frequenciesBASS KNOB:
4. Master Volume: Adjusts main audio system volume level.
5. RED--LINE input modelInput LED:
Green--Wireless BT input model.
6. Lets you connect the desired LINE input source.RCA L/R LINE Input:
7. Banana Type Speaker L/R Terminals: Lets you easily connect speaker wires
directly to the Amplifer.
8. Connect the adaptor DC.POWER In Jack:
9. Wireless BT Antenna: Wireless BT Streaming receiver
6 7 8
9
1 5 2 3 4
www.PyleUSA.com
3
Setup and pairing (Wireless BT ampliers) are really easy. The following
instructions will help you connect Audio Ampliers to your music system or
pair with your tablet, computer, or smartphone.
1. Connecting the Speaker Wire
Audio stereo power ampliers that will power one pair of passive speakers
between 4 and 8 ohms (or subwoofer if you got the 2.1 CH amp or subwoofer
amp). To connect the amplier to your speakers you will need 2-conductor
stranded speaker wire. The ampliers use high-quality binding posts that will
accept heavy gauge bare wire banana plugs, spade lugs, or pin terminators.
If you use your own speaker wire we recommend using at least 16 gauge wire
and using the same length of wire from the amplier to each speaker It's also a
good idea to turn o your amplier before connecting power, audio sources or
speakers.
Preparing the Speaker Wire
1. Separate the last 3" of each speaker wire conductor.
2. Strip 1/2" of insulation from the end of each wire.
3. Twist the exposed copper strands with your ngers 3 or 4 times so the strands
stay together.
NOTE:
As you make your connections, be sure to connect the positive (+) terminals on
your amplier to the positive (+) terminals on your speakers. Even if your wire does
not have (+) or (-) markings, most 2-conductor speaker wire has printing on one
side to help you dierentiate between the wire pairs.
If you are Using Bare Wire
1. Use your thumb and nger to unscrew the binding post connectors on the back
of each speaker.
2. Insert each speaker wire into the holes on the side of the binding post connectors,
observing proper polarity.
3. Retighten the binding posts with your ngers.
4. The stripped portion of the wire should be secured rmly in each connector.
5. Make sure that none of the speaker wire strands have come in contact with an
adjoining terminal.
Product specificaties
| Merk: | Pyle |
| Categorie: | Receiver |
| Model: | PDA20BT |
Heb je hulp nodig?
Als je hulp nodig hebt met Pyle PDA20BT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Receiver Pyle
5 December 2024
5 December 2024
23 Augustus 2024
24 Februari 2024
24 Februari 2024
24 Februari 2024
24 Februari 2024
18 December 2023
18 December 2023
13 December 2023
Handleiding Receiver
- Mx Onda
- Glemm
- Lyngdorf
- Imperial
- Renkforce
- Mercury
- Sound Ordnance
- Audiofrog
- Extron
- Fredenstein
- Memphis Audio
- Sonance
- Renegade
- Xantech
- FSR
Nieuwste handleidingen voor Receiver
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025