ProFlo PF3812LR Handleiding

Bekijk gratis de handleiding van ProFlo PF3812LR (1 pagina’s), behorend tot de categorie Tuinslang. Deze gids werd als nuttig beoordeeld door 8 mensen en kreeg gemiddeld 4.3 sterren uit 5 reviews. Heb je een vraag over ProFlo PF3812LR of wil je andere gebruikers van dit product iets vragen? Stel een vraag

®

Installation

• The plain end of the riser should be cut clean

and square. Make sure the tubing bottoms out

in supply stop body to ensure a good seal. Use

supplied plastic compression sleeve only.

• 3/8” OD plastic tubing and smaller the use of a

plastic sleeve is required.

• Pipe dope, compounds and sealants should not

be used for installation because they have

been known to cause leakage.

• Hand tighten ballcock nut - DO NOT

OVERTIGHTEN

• 3/8” metal nuts - hand tighten plus 1-1/2” to

2-1/2” additional turns.

• When properly tightening the compression

sleeve should not allow the tubing to be

removed by hand.

Wolseley’s North American operating companies

assume no responsibility for failure due to

improper installation.

Distributed Exclusively by Ferguson and Wolseley Canada

© 2014 Ferguson Enterprises, Inc. 21624 07/14

Installation Instructions

PEX Supply Tubes

Model Numbers

PF3812LR 3/8” x 12” Lavatory Riser

PF3820LR 3/8” x 20” Lavatory Riser

PF3830LR 3/8” x 30” Lavatory Riser

PF3836LR 3/8” x 36” Lavatory Riser

PF3812CRX 3/8” x 12” Closet Riser

PF3820CRX 3/8” x 20” Closet Riser

Product specificaties