Proaim TP-ALPA-W4U Handleiding
Proaim
Niet gecategoriseerd
TP-ALPA-W4U
Bekijk gratis de handleiding van Proaim TP-ALPA-W4U (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.7 sterren uit 6.5 reviews. Heb je een vraag over Proaim TP-ALPA-W4U of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/5
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Workstaon with 4U rack for Alpha Stand
Clamping Range: up to 45mm(TP ALPA W4U)- -
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
What s In The Box’
Workstaon with 4U Rack
Tray Holder
Mounng Bracket
4mm Allen Key
2
Feature: It features two handles on the sides to
raise, lower, or rotate the plaorm.
• To aach the Mounng Bracket to the
Workstaon with 4U Rack, remove all its
bolts using the 4mm Allen key.
Mounng Bracket Assembly
• Repeat the same process with the second
bolt.
• Insert the remaining six bolts inside the rack
and ghten them using the Allen key.
• With the help of the Allen key, all bolts of the
Mounng Bracket have been removed, as
shown in the image.
• Align both holes to aach the Mounng
Bracket to the Workstaon.
• Insert the bolt from above and ghten it
using the Allen key, as shown in the image.
• The Mounng Bracket is securely aached to
the Workstaon with 4U Rack, as shown in
the image.
3
• Loosen the clamp knob of the Workstaon
tray holder and mount it on the Alpha Stand
(Not Included).
Feature: Apart from holding the stand, sturdy
yet lightweight clamps quickly connect, adjust &
disconnect without hassle.
Tray Holder Assembly
• Aer mounng the Workstaon Tray Holder,
ghten the knob of the clamp.
NOTE: The plaorm aaches to your Alpha
stand using a Tray Holder that (Not Included)
has a pair of quick clamps with a 38 to 50mm
clamping range.
NOTE: Its tool less mounng clamps make it -
super quick to connect, adjust and disconnect
from a stand without hassle.
Feature: The workstaon can slide up/down
and rotate 360° while securely clamped to the
mast of your stand, ensuring a solid aachment.
• Your setup is ready, as shown in the image.
Feature: 4U rack mount underneath the
workstaon provides easy accessorizing with
various devices, such as ampliers, mixers,
wireless receivers, and signal processors.
Product specificaties
| Merk: | Proaim |
| Categorie: | Niet gecategoriseerd |
| Model: | TP-ALPA-W4U |
Heb je hulp nodig?
Als je hulp nodig hebt met Proaim TP-ALPA-W4U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Proaim
5 Juli 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
2 April 2025
2 April 2025
2 April 2025
Handleiding Niet gecategoriseerd
- Emeril Everyday
- SimGrade
- Danby
- REDARC
- Cressi
- Fluance
- Matterport
- Platinum Tools
- Vurkcy
- Cigweld
- Botex
- Genesis
- ZCover
- Artecta
- ESKA
Nieuwste handleidingen voor Niet gecategoriseerd
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025