Proaim P-MLAK-01 Handleiding
Bekijk gratis de handleiding van Proaim P-MLAK-01 (9 pagina’s), behorend tot de categorie Statief. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 3.6 sterren uit 9 reviews. Heb je een vraag over Proaim P-MLAK-01 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/9
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
A s s e m bl y M a n u a l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
Mul Adapter Kit (Mitchell Euro/Elemac Bowl) - - (P MLAK- -01)
1 x Mitchell plate 1 x Adapter Plate
1 x Bowl adapter
Size: 100 mm
1 x Euro Flange
1 x Mitchell
Lock
1x Euro Adapter
Clamping
knob
4 x Distance Rods
1 x Spanner (Size:13)
2 x L Type Allen Key -
(Size:5mm & 6mm)
1 x Bowl adapter
Size: 150 mm
Allen Bolts
(8 x 50mm=3pc)
(6 x 25mm=12pc) Allen Bolts
(6 x 12mm=6pc) Allen Bolts
2
Mul Adapter Kit Setup
• Attach the Euro Flange by matching it with the
thread of the Adapter Plate and then insert
the bolt.
• Secure all the bolts by tightening them using
the Allen Key.
• Attach the Distance Rods by matching them
with the side thread on the Adapter Plate and
then secure them using the Allen Key.
• Attach all the Distance Rods on the Adapter
Plate, as shown in the image. Place the
100mm bowl adapter by matching it with the
threads of the Rods.
Hard Case
Bowl Euro -
3
• After placing the 100mm bowl adapter on the
rods, then match the thread and insert the
bolts.
• Tighten the bolt using the Allen Key, so that
bowl euro can be attached properly.
Mitchell Euro -
• Attach the distance rods at equal distance
from each other, as shown in the image.
NOTE: You can aach rods on the mulple
threads of the Adapter Plate according to your
setup requirement.
• Attach the Distance Rods on the Adapter Plate
at equal distance from each other according
to your requirement and then secure them
with the help of the bolt.
• Place the Mitchell Plate by matching it with
the thread of the Distance Rods and then
insert the bolt by matching it with the thread
hole.
• Properly tighten the bolt of the Mitchell Plate
using the Allen Key.
Product specificaties
| Merk: | Proaim |
| Categorie: | Statief |
| Model: | P-MLAK-01 |
Heb je hulp nodig?
Als je hulp nodig hebt met Proaim P-MLAK-01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Statief Proaim
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
30 Januari 2025
7 December 2024
5 Augustus 2024
Handleiding Statief
- Kaiser Fototechnik
- Vinten
- Livoo
- Miller
- Revo
- Ulanzi
- GoPro
- Vanguard
- Krux
- Block & Block
- Levenhuk
- Auray
- Celly
- Camgear
- Gitzo
Nieuwste handleidingen voor Statief
15 Juni 2025
15 Juni 2025
11 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
9 Juni 2025
6 Juni 2025
24 Mei 2025