Proaim CM-BLPR-01 Handleiding
Bekijk gratis de handleiding van Proaim CM-BLPR-01 (5 pagina’s), behorend tot de categorie Statief. Deze gids werd als nuttig beoordeeld door 38 mensen en kreeg gemiddeld 4.5 sterren uit 19.5 reviews. Heb je een vraag over Proaim CM-BLPR-01 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/5
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Ballpro Camera Sucon Car Mount w
Vibraon Isolator (CM- -BLPR 01)
A s s e m b l y M a n u a l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
3 x Allen Bolts
(Size: x 6)1/4”-20 x 1 1/4” & 2.5 -
2 x Allen Key
(Size: 4mm, 2.5mm)
DJI QR Plate-
P QRG-
Bolt Size
3/8”, 1/4”
4 x Yellow Dust Covers
Foam With Bag Packing Sucon Car Mount
2
Ballpro Camera Setup
• Place your rst sucon cup in the selected
Posion from where you want to shoot.
• Similarly, remove rest of the yellow dust
covers of the sucon mount, as shown in the
image.
• Sucon Car Mount is now properly placed on
the car.
• Remove the yellow dust cover of Sucon Car
Mount.
• Press down the sucon cup and keep pushing
the pump to rmly x it on the surface. Repeat
this process for all the sucon cups.
Cauon: Recheck the Pump every 90 minutes. If
the red line is visible, Re pump the cup without -
losing the remaining vacuum ll the Red Line
disappears.
• Secure the movement of the ball joint with the
help of the Ratchet knob of the Telescopic
legs.
3
• Place the DJI QR Plate on the Sucon Car -
Mount.
NOTE: Two Ratchet knobs are provided in
Sucon Car Mount, with the help of the boom
knob, you can change the ball joint movement of
the telescopic legs.
• Follow the same process for other Allen Bolts.
• DJI QR Plate is properly aached on the -
Sucon Car Mount.
• Then insert Allen bolts and ghten with the
help of 4mm Allen key.
• Then aach the (P-QRG) plate with Ronin
Gimble and ghten it properly
(Not Included) -
with the help of a Screw Driver.
Product specificaties
| Merk: | Proaim |
| Categorie: | Statief |
| Model: | CM-BLPR-01 |
Heb je hulp nodig?
Als je hulp nodig hebt met Proaim CM-BLPR-01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Statief Proaim
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
30 Januari 2025
7 December 2024
Handleiding Statief
- Bee Star
- JOBY
- Omnitronic
- Axler
- Swarovski
- Vinten
- Kogan
- Royer Labs
- ARRI
- Falcon Eyes
- Acratech
- Manfrotto
- GoPro
- Adam Hall
- Krux
Nieuwste handleidingen voor Statief
31 Juli 2025
31 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
29 Juli 2025
29 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025