Privileg PV2IC10BS7LA0 Handleiding
Pagina's 8 Engels Vaatwasser
Bekijk de handleiding van Privileg PV2IC10BS7LA0 gratis online of download de PDF. 52 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
1
ENQuick Guide
PROGRAMS TABLE
ProgramPrograms description
Drying
phase
Auto Door
Available
options
*)
Duration
ofwash
program
(h:min)
**)
Water
con-
sumption
(litres/cycle)
Energy
con-
sumption
(kWh/cycle)
1.
Eco50°- Eco program is suitable to clean normally soiled tableware, that
for this use, it is the most ecient program in terms of its combined energy
and water consumption, and that it is used to assess compliance with the EU
Ecodesign legislation.
3:358.70.59
2.
Auto Intensive 65° - Automatic program for heavily soiled dishes and pans
(not to be used for delicate items).
2:00 - 3:10 14.0 - 17.01.50 - 1.85
3.
Auto Mixed - 55° Automatic program for normally soiled pans and dishes.
1:20 - 3:00 7.0 - 14.00.70 - 1.10
4.
Half Load 55°- Ideal for washing a half load of lightly or normally soiled crockery.
1:2011.01.00
5.
Rapid 30’ 45° - Program to be used for half load of lightly-soiled dishes with
no dried food residues. Without drying.
-
0:309.00.50
6.
Extra Hygiene65° - Normally or heavily soiled crockery, with additional antibac-
terial wash. Can be used to perform maintenance of the dishwasher.
-
1:5012.01.30
7.
Extra- 50° Program that allows to wash very big items loaded in the lower
rack. Please apply detergent directly to tub instead of detergent dispenser.
Upper rack should be removed with this cycle.
-
-
1:3011.01.20
8.
Prewash- Use to refresh crockery planned to be washed later. Nodetergent
to be used with this program.
-
-
0:104.50.01
9.
Push&GO50° - Everyday wash and dry cycle that ensures great cleaning per-
formance in a short time without the need to pre-treat dishes.
1:2511.51.10
1. On-O/Reset button with indicator
light
2. Program selection button
3. Salt rell indicator light
4. Rinse Aid rell indicator light
5. Program number and delay time
indicator
6. Tablet (Tab) indicator light
7. Display
8. Push & Go button
9. Delay button
10. Start/Pause button with
indicator light/ Tablet (Tab)
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and on
the machine’s functional components.
• It is mandatory that the salt reservoir never be empty.
• It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher and must be
lled when the SALT REFILL indicator light in the control panel is lit.
1. Remove the lower rack and unscrew the reservoir cap
(anticlockwise).
2. Position the funnel and ll the salt reservoir (see gure)
right up to its edge (approximately 1 kg); it is not unu-
sual for a little water to leak out.
3. Only the rst time you do this: ll the salt reservoir
with water.
4. Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get into the
container during the wash program (this could damage the water softener be-
yond repair). Whenever you need to add salt, it is mandatory to complete the
procedure before the beginning of the washing cycle to avoid corrosion.
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently pre-
venting scale buildup on heater, contributing also to better cleaning e-
ciency. This system regenerates itself with salt, therefore it is required
to rell salt container when empty.
A
C
D
Frequency of regeneration depends on water hardness level setting - regen-
eration takes place once per 6 Eco cycles with water hardness level set to 3.
Regeneration process starts in nal rinse and nishes in drying phase, be-
fore cycle ends.
• Single regeneration consumes: ~3.5L of water;
• Takes up to 5 additional minutes for the cycle;
• Consumes below 0.005kWh of energy.
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse
aid dispenser should be lled when the ARINSE
AID REFILL indicator light in the control pan-
el is lit.NEVER pour the rinse aid directly into the
appliance tub.
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device . Introduce the C
detergent into the dry dispenser only. Place the amount of detergent for D
pre-washing directly inside the tub.
If all-in-one detergents are used, we recommend using the TABLET button,
because it adjusts the program so that the best washing and drying results
are always achieved.
Usage of detergent not designed for dishwashers may cause malfunc-
tion or damage to the appliance.
12345678910
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on
comparative EN testing conditions, please send an email to the following address:
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and
pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-
bration. The sensor calibration can increase program duration up to 20 min.
PLEASE SCAN THE
QR CODE ON YOUR
APPLIANCE IN
ORDER TO HAVE
MORE DETAILED
INFORMATION
Before using the appliance carefully read Safety and Installation Instructions.
After installation, please remember to remove all transport protection parts from
the dishwasher.
CONTROL PANEL
FIRST TIME USE
More information in the Daily Reference Guide on website.
Foutcodes Privileg PV2IC10BS7LA0
Foutcodes uit de officiële handleiding, met betekenis en oplossing.
| Code | Betekenis | Oplossing | Pagina |
|---|---|---|---|
| 15 | De vaatwasser beëindigt het programma voortijdig. Het aan-uitlampje knippert snel. De afvoerslang is te laag geplaatst, er treedt hevelwerking op naar de riolering of er zit lucht in de watertoevoer. | Controleer of het uiteinde van de afvoerslang op de juiste hoogte is geplaatst (zie INSTALLATIE). Controleer op hevelwerking naar de riolering en installeer indien nodig een beluchtingsventiel. Controleer de watertoevoer op lekken of andere problemen waardoor lucht kan binnendringen. | 3 |
| 6 | De vaatwasser vult zich niet met water. Het aan-uitlampje knippert snel. | Controleer of er water uit de waterleiding komt en of de kraan openstaat. Controleer of de toevoerslang niet geknikt is; stel het programma opnieuw in en herstart de vaatwasser. Controleer en reinig de zeef in de watertoevoerslang. Schakel daarna de vaatwasser uit en weer in en start een nieuw programma. | 3 |
| H | De vaatwasser vult zich niet met water. Het aan-uitlampje knippert snel. | Controleer of er water uit de waterleiding komt en of de kraan openstaat. Controleer of de toevoerslang niet geknikt is; stel het programma opnieuw in en herstart de vaatwasser. Controleer en reinig de zeef in de watertoevoerslang. Schakel daarna de vaatwasser uit en weer in en start een nieuw programma. | 3 |
Alle foutcodes Privileg Vaatwasser
Product specificaties
| Merk: | Privileg |
| Categorie: | Vaatwasser |
| Model: | PV2IC10BS7LA0 |
Heb je hulp nodig?
Als je hulp nodig hebt met Privileg PV2IC10BS7LA0 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Vaatwasser Privileg
Privileg P0U ECO D551 S Handleiding Privileg P0B ECO D551 X Handleiding Privileg PV2UC10BS7A0S Handleiding Privileg PV2PC10BS7A0 Handleiding Privileg PVK IDN Handleiding Privileg P0U ECO 2D541 S Handleiding Privileg RFO 2T133 A F S Handleiding Privileg P0I ECO 2D541 S Handleiding
Alle Privileg Vaatwasser handleidingen
Populair in Vaatwasser
Privileg RFO 3C23 A 6.5 X Handleiding Privileg RFO 3T133 A F Handleiding Privileg RBO 3C23 A 6.5 X Handleiding
Handleiding Vaatwasser
Nieuwste handleidingen voor Vaatwasser
Electrolux EEA63300L Handleiding Electrolux EEA28405L Handleiding Electrolux EEA43400L Handleiding Electrolux EES48320L Handleiding Electrolux E72LB210S Handleiding Electrolux KEGB3420L Handleiding Electrolux EES48405L Handleiding Electrolux ESS47400SX Handleiding BEKO BRI63491 Handleiding BEKO BDFN26431S Handleiding