Prince Castle CW-6 Handleiding

Prince Castle Snijmachine CW-6

Lees hieronder de đź“– handleiding in het Nederlandse voor Prince Castle CW-6 (2 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Model No. CW Series
Citrus Wedger™
Operating
Instructions
355 East Kehoe Blvd. • Carol Stream, IL 60188 USA
Telephone: 630-462-8800 • Fax: 630-462-1460
Toll Free: 1-800-PCASTLE
www.princecastle.com
925-500revEPrinted in USA 1/07 © 2007
TABLE OF CONTENTS
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Specification
Model No. Slice Size
CW-6 8 Section (YEL PC)
CW-1 8 Section (BLK PC)
LIMITED WARRANTY
This t is warranted to be free from defects in erial produc mat
and/ workmanship for a period of 90 Days fr dat of or om e
purchase with the exception of the blade
cartridge. Blade cartridge is warranted to be free from
defects at time of delivery only.
A Proof rchase is required for l of Pu al warranty
claims.
Any component ich s to faulty in materi and/or wh prove be al
workmanshi will e replaced (at the option of Prince p b
Castle, Inc.) without cost the to(including freight and duty)
customer parts or labor. for
T warran is subject to the following exceptions/conditions:his ty
•
•
Thi equipment is portable; charges for on-locations
servi (e.g., trip charges, mileag are not includedce e)
in the provisions of th warranty. is
Damage caus carelessnes neglect and/or ed by s,
abuse (e.g., droppi tampering or altering parts), ng,
equipment damaged shipm by fire, flood or an in ent,
act of God is covered unde thi warranty. not r s
Printed in USA 1/07 © 2007 2 925-500revE
INSTALLATION
1. After you have removed the Citrus Wedger™
from the carton, inspect the unit for signs of
damage. If there is damage to the unit:
• Notify carrier within 24 hours after delivery.
• Save carton and packing materials for
inspection purposes.
• Contact your Prince Castle Customer Sales
Department at 1-630-462-8800 to arrange for a
replacement to be sent.
2. Verify that all parts have been received.
OPERATION
CAUTION
Blades are sharp. Do not touch blades.
1. Place unit on a level surface.
2. Lift handle assembly off of the base, place citrus
product on center of the base. Push handle down
through the citrus product. See figure 1.
figure 1
CLEANING
CAUTION
Blade are sharp. Do not touch blades.s
1. Spray the Blade Assembly and Pusher Head with
hot water to remove residue..
2. The Blade Assembly and Pusher Head can be
disassembled by removing the 2 screws and
removing the retainer plate..
3. Brush the blades (from the topside) and the
Pusher Head with a brush and hot soapy water.
4. Rinse by spraying with hot water
5. Let air dry.
6. Reassemble Pusher Head and Blade Assembly
using 2 screws.
Handle
Assembly
Base
Assembly
Citrus Product
CAUTION
DO NOT place in the dishwasher.
This can cause damage to the blade
assembly and void the warranty.

Product specificaties

Merk: Prince Castle
Categorie: Snijmachine
Model: CW-6

Heb je hulp nodig?

Als je hulp nodig hebt met Prince Castle CW-6 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Snijmachine Prince Castle

Prince Castle

Prince Castle CW-1 Handleiding

3 Augustus 2023
Prince Castle

Prince Castle CW-6 Handleiding

3 Augustus 2023

Handleiding Snijmachine

Nieuwste handleidingen voor Snijmachine

Graef

Graef Classic C95 Handleiding

10 April 2024
Graef

Graef Master M95 Handleiding

10 April 2024
Graef

Graef Sliced Kitchen SKS320 Handleiding

27 Maart 2024
Graef

Graef Sliced Kitchen SKS300 Handleiding

27 Maart 2024
Gorenje

Gorenje R708A Handleiding

14 Maart 2024
RGV

RGV AUSONIA 220 Handleiding

13 Maart 2024
Gorenje

Gorenje R902A Handleiding

1 Maart 2024
Hyundai

Hyundai FS801 Handleiding

24 Februari 2024
Tescoma

Tescoma Handy 643560 Handleiding

15 Februari 2024
Waves

Waves SM-1062221 Handleiding

30 Januari 2024