Powr-Flite PS320 Handleiding
Powr-Flite
Veegmachine
PS320
Lees hieronder de 📖 handleiding in het Nederlandse voor Powr-Flite PS320 (4 pagina's) in de categorie Veegmachine. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 5.0 sterren beoordeeld
Pagina 1/4
Commercial
Push-Sweeper
Operator and Parts Manual
Model PS320
PS320M
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Read all instructions before using this machine.
IMPORTANT SAFETY INSTRUCTIONS
This manual is to ensure that the PS320 is operated correctly. All operators must read, understand and practice the following safety instructions.
Before use, check that the unit and operating equipment are in perfect condition and are safe to operate. Do not use the machine if it is not in
perfect condition. This sweeper is intended exclusively for operation on solid, level and dry surfaces with an inclination not exceeding 20%.
CAUTION: Use only as described in this manual.
CAUTION: This sweeper must not be used for removing hazardous materials.
CAUTION: Use only on surfaces indicated in the operating instructions.
CAUTION: Replace damaged or worn parts with genuine original equipment parts in order to maintain safety and to protect your warranty.
CAUTION: Never sweep over surfaces that are wet.
CAUTION: Do not store outdoors.
CAUTION: Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
CAUTION: Do not reach into or under the machine under any circumstances when running.
CAUTION: Use only accessories and spare parts that have been approved by the manufacturer.
CAUTION: Do not spray clean the unit.
The Powr-Flite Limited Warranty
The manufacturer warrants to the original purchaser that products manufac-
tured are free from defects, provided such goods are installed, operated and
maintained in accordance with written manuals or other instructions for a
period of 1 year from date of purchase on workmanship, motor, and parts.
Unpacking and Assembly
1. Remove the PS320 from the box.
2. Put the handle in the upright position by pulling it downwards into the two
tappets completely. Tighten with two thumbscrews. (Fig. 1)
3. To install the side brooms, apply light pressure, twisting the brooms upwards
on the snap device until you feel them lock into place. (Fig.2)
Operation
1. To adjust the side brooms, move the adjustment knob until the side brooms just
touch the floor.
2. Adjust the main brooms so that they touch the floor. Be certain to adjust
both sides so that the main brooms touch the floor evenly. (Fig. 3)
3. To adjust the side brooms, turn the knob above the side broom assembly to the
left or to the right. (Fig. 4)
4. To use the sweeper, simply push it at a normal walking pace and not
too slowly.
5. To empty the hopper, simply lift it out and empty into a trash can.
6. Be sure to store sweeper in the compact upright position. This will prevent
broom damage and wear.
7. To park sweeper in folded storage postion, loosen the two screwed grips
slightly and draw the guide bar down. The handle can now be folded down
over the top of the sweeper. Park in upended postion with wheels toward
the wall. (Fig. 5-6)
Maintenance
1. The PS320 is designed to be maintenance free. All bearings are dust proof and
all parts are weatherproof. To clean the machine just wipe off with a dry or
damp cloth. It is not recommended to clean the machine with large amounts
of water.
Main Broom Replacement
1. The main brooms are designed according to the tandem roller principle so that
only one of the two brooms is in contact with the surface area and thus
exposed to wear and tear. The front broom within the machine will keep its
original size and can be used as replacement broom for the rear broom.
2. To replace the either main broom, tilt the machine upside down on a suitable
support.
3. Unscrew the two height-adjustment hand grips and remove them. (see Fig. #7)
4. Withdraw the two bearings, roller and driving pieces at the side and place them
on the new main broom, making sure to use the right driving piece for the right
side of the main broom and the left on the left. The two driving pieces are not
interchangeable.
5. Replace the main broom and adjust to the required working height on both
sides.
Side Broom Replacement
1. To replace the side broom, tilt the machine upside down on a suitable support.
2. Use two fingers to press the snap pin in the center of the side broom assembly.
The center axle does not need to be unscrewed – no tools are required to
replace the side brooms. (see Fig. #8)
3. Remove the side broom from the side broom assembly and exchange it.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Fig.1
Fig. 3
Fig. 5
Fig. 2
Fig. 4
Fig. 6
Fig. 7
Fig. 8
Product specificaties
| Merk: | Powr-Flite |
| Categorie: | Veegmachine |
| Model: | PS320 |
Heb je hulp nodig?
Als je hulp nodig hebt met Powr-Flite PS320 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Veegmachine Powr-Flite
9 Juni 2025
9 Juni 2025
Handleiding Veegmachine
- Veegmachine Viper
- Veegmachine Easymaxx
- Veegmachine Parkside
- Veegmachine Lavor
- Veegmachine Tornado
- Veegmachine Sun Joe
- Veegmachine Hyundai
- Veegmachine Haier
- Veegmachine Stiga
- Veegmachine Scheppach
- Veegmachine Anova
- Veegmachine Mytee
- Veegmachine Blodgett
- Veegmachine Vestil
- Veegmachine Gude
Nieuwste handleidingen voor Veegmachine
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
3 Juni 2025
21 Mei 2025
17 Mei 2025
9 Maart 2025
7 December 2024
15 November 2024