PowerWalker VFI 1000 C LCD Handleiding


Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor PowerWalker VFI 1000 C LCD (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2.5 gebruikers gemiddeld met 4.8 sterren beoordeeld

Pagina 1/5
ENGLISH
PowerWalker VFI 1000 3000 C LCD-
Quick Guide
I. LCD Panel
Display
Indicates the remaining backup ๎›Žme in pie chart.
Indicates the remaining backup ๎›Žme in numbers.
H: hours, M: minute, S: second
Indicates that the warning and fault occurs.
Indicates the warning and fault codes, and the codes are listed in
details in 3-5 sec๎›Žon.
Indicates that the UPS alarm is disabled.
Indicates the output voltage, frequency or ba๎›˜ery voltage.
Vac: output voltage, Vdc: ba๎›˜ery voltage, Hz: frequency
Indicates the load level by 0-25%, 26-50%, 51-75%, and 76-100%.
Indicates overload.
Indicates the load or the UPS output is short circuit.
Indicates the UPS connects to the mains.
Indicates the ba๎›˜ery is working.
Indicates the bypass circuit is working.
Parameter 1
Parameter 2
Parameter 3
ENGLISH
Indicates the ECO mode is enabled.
Indicates the Inverter circuit is working.
Indicates the output is working.
Indicates the Ba๎›—ery level by 0-25%, -50%, 51-75%, and 76-26
100%.
Indicates the ba๎›—ery is fault.
Indicates low ba๎›—ery level and low ba๎›—ery voltage.
Indicates the input voltage or frequency or ba๎›—ery voltage.
Vac: Input voltage, Vdc: ba๎›—ery voltage, Hz: input frequency
II. Rear panel view
1.AC input
5.SNMP intelligent slot (op๎šฑon)
2.Input circuit breaker
6.Output receptacles
3.USB communica๎šฑon port
7.Output terminal (only 3kVA unit)
4.RS 232 communica๎šฑon port-
III. Communica๎šฆon connec๎šฆon
USB port
RS-232 port
Intelligent slot
Apart from standard USB Port, the UPS is equipped with RS 232. Those two ports do not work -
at the same ๎šฑme.
ENGLISH
IV. Modes and warnings
Warning
Icon
Alarm
Muted
Online mode
No Alarm
N/A
ECO mode
No Alarm
N/A
Frequency Converter
mode
No Alarm
N/A
Ba๎›ถery mode
Sounding every 4 seconds
Yes
Bypass mode
Sounding every 10
seconds
Yes
Standby mode
No Alarm
N/A
Low Ba๎šปery
Sounding every second
Yes
Overload
Sounding twice every
second
No
Ba๎šปery is not
connected
Sounding every second
No
Over Charge
Sounding every second
No
Over temperature
Sounding every second
No
Charger failure
Sounding every second
No
Ba๎šปery fault
Sounding every second
No
Out of bypass voltage
range
Sounding every second
No
Bypass frequency
unstable
Sounding every second
No
EEPROM error
Sounding every second
No
Fault
Con๎›ฌnuously sounding
Yes
V. Frequency Converter Mode
When input frequency is within 40 Hz to 70 Hz, the UPS can
be set at a constant output frequency, 50 Hz or 60 Hz. The
UPS will s๎šฑll charge ba๎šปery under this mode. Frequency
Converter requires de ra๎šฑng of the UPS Power to 80%.-
VI. Bu๎šฑon opera๎šงon
ON/Mute Bu๎›ณon
๏‚ท Press and hold ON/Mute bu๎›ถon for at least 2 seconds to turn on the UPS.
๏‚ท When the UPS is on ba๎›ถery mode, press and hold this bu๎›ถon for at least 5 seconds to


Product specificaties

Merk: PowerWalker
Categorie: Niet gecategoriseerd
Model: VFI 1000 C LCD

Heb je hulp nodig?

Als je hulp nodig hebt met PowerWalker VFI 1000 C LCD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd PowerWalker

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd