Power Dynamics BT20 Handleiding

Power Dynamics Receiver BT20

Lees hieronder de 📖 handleiding in het Nederlandse voor Power Dynamics BT20 (16 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

BT20 Compact BT Amplier

Ref. nr.: 952.508

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCION ES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.1

ENGLISH

Congratulations to the purchase of this Power Dynamics pro ct. Please read this manual thoroughly prior to using the unit in du

order to benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/ electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock. or

Keep the manual for future reference.

- or to using the unit, please ask advice from a Pri

specialist. When the unit is switched on for the rst time, fi

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and mal nction. fu

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- not plug or unplug the unit with wet hands. Do

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer.

- To avoid re and shock hazard, do not e ose the unit to xp

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on.

- Never use e unit in humid rooms or outdoors. th

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the xture on and o. This

shortens the life time.

- Keep the unit out of the reach of ildren. Do not leave ch

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- This unit is th speaker inside which can cause wi

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- If this product have a built-in lead-acid rechargeable

battery. Please recharge the battery every 3 months if

you are not going to use the product fo a long period of r

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the unit has fallen, always have it checked by a

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for r airs, otherwise serious ep

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the origi l packing material so that you can na

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attrac the attention of the user to important instructions that are contained in the manual and that he should ts

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and

t ir guarantee! he

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask yo local authorities or your ur

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid

your wa y. The warranty is not a licable in case of accidents or damages caused by inappropriate use or disrespect of the warnings rrant pp

contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediate upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are ly

present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if

any parts appear dam e from shipping or the package itself shows signs of mishandling. Save the package and all packing ag

materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original

factory box and pack ing.

If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched o until it has reached room temperatu . re

POWERSUPPLY

On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains

voltage corresponds to this, all other voltages than specied, the light eect can be irreparably damaged. The oduct must also pr

be directly connected to the mains and may be used. No dimmer or adjustable power supply.

Always connect the device to a protected circuit (fuse).

INSTALLATION

1. Connect your speakers correctly with the speaker output terminal of the 2 amplier module. BT 0 BT

For the left speaker, make sure to connect with the left 2 slots of the output terminal. For the right speaker, the right 2

slots should be used.

2. Insert the adapter to power the unit (2A) use the DC POWER connectors alternatively (2B). or “ ” input

3. Enable the function on your device (smartphone, tablet, etc.) containing the music you want to play. Search for possible BT

BT connections and NAMICS . select “POWER DY ” to make a connection If a password is required, enter “1234”.

Besides streaming your content vi , it is also possible to connect your music source via USB (3A) SD card slot (3B). a BT or

4. The indicator LED shows the current status of the BT20 module. When powering on the device, the LED will ash quickly.

When using BT playback, the LED will ash slowly hen using USB or SD playback, the LED will ash quickly. . W

Product specificaties

Merk:	Power Dynamics
Categorie:	Receiver
Model:	BT20
Kleur van het product:	Wit
Gewicht:	500 g
Breedte:	86 mm
Diepte:	86 mm
Hoogte:	31 mm
Connectiviteitstechnologie:	Bedraad
DC voltage input:	19 V
Audio-uitgangskanalen:	2.0 kanalen
Frequentiebereik:	20 - 20000 Hz
Signaal/ruis-verhouding:	95 dB
Totale harmonische vervorming (THD):	0.04 procent
AC-ingangsspanning:	100-240 V
AC-ingangsfrequentie:	50-60 Hz
Piekvermogen per kanaal:	30 W
Synchronisatie ingangsimpedantie:	8 Ohm
Versterker klasse:	D
CD audio in (L, R):	Ja