KanexPro AUD-DTE-2CHAMP Handleiding

Bekijk gratis de handleiding van KanexPro AUD-DTE-2CHAMP (9 pagina’s), behorend tot de categorie Receiver. Deze gids werd als nuttig beoordeeld door 2 mensen. Heb je een vraag over KanexPro AUD-DTE-2CHAMP of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AUD-DTE-2CHAMP

PRODUCT MANUAL

150W Dante Class D Amplifier with DSP

The KanexPro AUD-DTE-2CHAMP is a 150W Class D amplifier with built-in DSP and Dante audio networking. It powers low-

impedance (4Ω/8Ω) stereo speakers at 2×75W or bridges to a single-channel 150W output for 70V/100V constant-voltage speaker

lines. Dante 2-channel digital audio input and output, plus balanced/unbalanced line-level analog I/O, provide flexible integration into

networked AV systems. Control via RS-232, LAN, and Web GUI. Half-rack mountable.

Surge Protection Recommended — This product contains sensitive electrical components that may be damaged by electrical spikes,

surges, electric shock, or lightning strikes. Use of surge protection systems is highly recommended.

Caution — This product requires UTP connectors. Connect using the direct interconnection method (T568B) only — do not cross

connect.

TABLE OF CONTENTS

1. Introduction1

2. Features1

3. Package Contents1

4. Specifications2

5. Operation Controls & Functions3–4

5.1 Front Panel3

5.2 Rear Panel4

6. Default Settings5

7. Web GUI User Guide5

8. RS-232 Control Commands6–8

9. Connection Diagram9

10. Troubleshooting9

FEATURES

PACKAGE CONTENTS

1× 150W Class D Amplifier • 3× 5-pin 3.81mm Phoenix Connector (male) • 2× 4-pin 5.08mm Phoenix Connector (male) • 6×

Mounting Ears • 24× Machine Screws • 1× AC Power Cord (100–240V, 1.5m) • 1× Product Manual

Dante 2-channel digital audio input and output with balanced/unbalanced line-level analog I/O

Built-in audio DSP processor with 31-band GEQ, delay, and mixer

Lo-Z mode: 2×75W at 4Ω/8Ω stereo or 1×150W bridged at 8Ω

Hi-Z mode: 1×150W at 70V or 100V constant voltage for distributed speaker systems

Independent input gain, output EQ, delay, and volume control per output channel

48kHz sampling rate with 24-bit independent A/D and D/A converters

5–12V trigger input for external power-on/mute control

Auto standby with configurable timer (0–120 minutes)

5 preset scenes for quick recall of audio configurations

Control via RS-232, LAN (TCP/IP), and Web GUI

Half-rack mountable design (240mm W × 210mm D × 44mm H)

Scan for product page

kanexpro.com/item/AUD-DTE-2CHAMP

888.975.1368 | [email protected] | kanexpro.com

1 / 9

Product specificaties