Posiflex KP-500 Handleiding

Posiflex Niet gecategoriseerd KP-500

Lees hieronder de đź“– handleiding in het Nederlandse voor Posiflex KP-500 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
FCC Notes:
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions manual, may cause interference to radio communications.
It has been tested and found to comply with limits for a Class A digital device pursuant to subpart
B of Part 15 of FCC Rules, which are designed to provide reasonable protection against
interference when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his owns expense will be
required to take whatever measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized technicians opens
the machine. The user should consult his/her dealer for the problem happened. Warranty voids if
the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex
Technology, Inc. will assume no liability for any technical inaccuracies or editorial or other errors
or omissions contained herein, nor for direct, indirect, incidental, consequential or otherwise
damages, including without limitation loss of data or profits, resulting from the furnishing,
performance, or use of this material.
This information is provided “as is” and Posiflex Technology, Inc. expressly disclaims any
warranties, expressed, implied or statutory, including without limitation implied warranties of
merchantability or fitness for particular purpose, good title and against infringement.
The information in this manual contains only essential hardware concerns for general user and is
subject to change without notice. Posiflex Technology, Inc. reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide applicative
notices and arrangement for special options utilizing this product. The user may find the most up
to date information of the hardware from: http://www.posiflex.com or http://www.posiflex.com.tw
or http://www.posiflexusa.com
All data should be backed-up prior to the installation of any drive unit or storage peripheral.
Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this
or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
or otherwise, without prior express written consent from Posiflex Technology, Inc. the publisher of
this documentation.
© Copyright Posiflex Technology, Inc. 2013
All brand and product names and trademarks are the property of their respective holders.
KP-500
MULTIFUNCTION
SECURITY DEVICE
USER’S MANUAL
Rev.:
original
P/
N:
18420900010
Page 2
ALERT TO OUR HONORABLE CUSTOMERS:
Please always read thoroughly all the instructions and documents delivered
with the product before you do anything about it. Don’t take any premature
action before you have a full understanding of the consequences.
DAILY MAINTENANCE GUIDE
For regular cleaning of the KP systems, please use only soft haired brush or
dry soft cloth. You may use moist soft cloth to remove stains when necessary.
Apply only suitable amount of mild neutral cleaner for obstinate stains. Please
note that never use Acryl dissolving solvent or Polycarbonate dissolving
solvent. You may apply ammonia-based glass cleaner only on the screen
surface.
GENERAL DESCRIPTION
KP-500 is 40 keys upgrade kit for Posiflex POS terminal 15” XT series. 24
programmable keys with 16 predefined keys place a convenience side mount
input device for pleasant user experience.
INSTALLATION
For KP-500 w/o SA-104 to install in the 15” XT series, please
arrange the XT’s main unit on a flat surface and unfasten these
screws which are circled in the right picture to release the
cover.
There are 2 connectors which you may find after the cover
released and please gently connect the cable to one of the 2 white
connector which are inside the side cover of KP-500 as shown in
the right picture.
After connecting this cable, please hold the KP-500 and join
to the XT main unit and as arrowed in the right picture.
After matching the KP-500, please use the original
screws to fasten the keypad. Please reserve the cover
if there is a possibility to remove the side mount
upgrade kit.
Page 3
KEYTOP LAYOUT
Keytop Replacement
The keypad in KP-500 is organized into 2 parts: a 4 X 4 numerical keypad area
and a 4 x 6 square programmable keypad area.
Conversely, this keypad allows some layout alterations by the system
integrator. Besides the standard single key installed, there are double keys and
blank keys for purchase to provide more convenient user interface.
When replacement of keytop is required, it is advisable to use a flattop (minus
sign) screw driver (Do not use the attached key clip for this operation.) to help
getting the key top off gently. Please always first orientate the key tops as
below before inserting any keytop into the case of the keypad. Failure to do so
could result in permanent damage not covered in product warranty.
Please always match the latching tab on bottom stem of keytop with the tab in
guiding hole and gently press the key top down till a click sound is heard as
indicated in the pictures below.
Labeling On Keytop
The programmable keypad is provided with easy and durable methods for
reminding the user of content programmed in each programmable key. First
preprint (or write) in each cell of the attached colored sheet the “name” for
each key. Stick each cell to the corresponding keytop and then put on the
transparent key cap from the accessories. In this way, the labeling will be
protected and resistant to scratch or rubbing.
When re-labeling is required, please use the attached key clip to hook up the
transparent key cap and change the label then re-cap.
KEYPAD PROGRAMMING
The programming of the keys above the numerical keypad in KP-500 is in

Product specificaties

Merk: Posiflex
Categorie: Niet gecategoriseerd
Model: KP-500

Heb je hulp nodig?

Als je hulp nodig hebt met Posiflex KP-500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Posiflex

Posiflex

Posiflex PD-2604UE Handleiding

21 Juni 2023
Posiflex

Posiflex PD-309UE Handleiding

18 Juni 2023
Posiflex

Posiflex PD-2600R Handleiding

17 Juni 2023
Posiflex

Posiflex PD-2601R Handleiding

16 Juni 2023
Posiflex

Posiflex PD-350UE Handleiding

16 Juni 2023
Posiflex

Posiflex PD-6507U Handleiding

15 Juni 2023
Posiflex

Posiflex HC-1521IR-Pro Handleiding

15 Juni 2023
Posiflex

Posiflex TX-2100 Handleiding

14 Juni 2023
Posiflex

Posiflex PD-2605UE Handleiding

13 Juni 2023
Posiflex

Posiflex KP-500 Handleiding

11 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024