Porter-Cable 7800 Handleiding

Porter-Cable Schuurmachine 7800

Lees hieronder de 📖 handleiding in het Nederlandse voor Porter-Cable 7800 (15 pagina's) in de categorie Schuurmachine. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15

Part No. 904374 - 06-26-02

MODEL 7800

MODEL 7801

ESPAÑOL: PÁGINA 15

FRANÇAISE : PAGE 29

Drywall Sander

Instruction

manual

The Model and Serial No. plate is located on the main

housing of the tool. Record these numbers in the

spaces below and retain for future reference.

Model No. ______________________________________

Type ___________________________________________

Serial No._______________________________________

IMPORTANT

Please make certain that the person who is

to use this equipment carefully reads and

understands these instructions before

starting operations.

To learn more about Porter-Cable

visit our website at:

http://www.porter-cable.com

Patent Pending

904374- 06-26-02.qxd 7/11/02 8:12 AM Page 1

WARNING: SOME DUST CREATED BY POWER SANDING, SAWING,

GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES

contains chemicals known to cause cancer, birth defects or other

reproductive harm. Some examples of these chemicals are:

· lead from lead-based paints,

· crystalline silica from bricks and cement and other masonry products, and

· arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this

type of work. To reduce your exposure to these chemicals: work in a well

ventilated area, and work with approved safety equipment, such as those dust

masks that are specially designed to filter out microscopic particles.

GENERAL SAFETY RULES

WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS. Failure

to follow all instructions listed below, may result in electric shock, fire and/or

serious personal injury.

SAVE THESE INSTRUCTIONS.

WORK AREA

1. Keep your work area clean and well lit. Cluttered benches and dark

areas invite accidents.

2. Do not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases, or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep bystanders, children, and visitors away while operating a

power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

1. Grounded tools must be plugged into an outlet properly installed and

grounded in accordance with all codes and ordinances. Never remove the

grounding prong or modify the plug in any way. Do not use any adapter

plugs. Check with a qualified electrician if you are in doubt as to whether

the outlet is properly grounded. If the tools should electrically malfunction or

break down, grounding provides a low resistance path to carry electricity away

from the user.

2. Avoid body contact with grounded surfaces such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your

body is grounded.

3. Don’t expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electric shock.

4. Do not abuse the cord. Never use the cord to carry the tools or pull

the plug from an outlet. Keep cord away from heat, oil, sharp edges or

moving parts. Replace damaged cords immediately. Damaged cords

increase the risk of electric shock.

5. When operating a power tool outside, use an outdoor extension cord

marked “W-A” or “W”. These cords are rated for outdoor use and reduce the

risk of electric shock.

PERSONAL SAFETY

1. Stay alert, watch what you are doing, and use common sense when

operating a power tool. Do not use tool while tired or under the influence

of drugs, alcohol, or medication. A moment of inattention while operating

power tools may result in serious personal injury.

904374- 06-26-02.qxd 7/11/02 8:12 AM Page 2

2. Dress properly. Do not wear loose clothing or jewelry. Contain long

hair. Keep your hair, clothing, and gloves away from moving parts. Loose

clothes, jewelry, or long hair can be caught in moving parts.

3. Avoid accidental starting. Be sure switch is OFF before plugging in.

Carrying tools with your finger on the switch or plugging in tools that have the

switch ON invites accidents.

4. Remove adjusting keys or wrenches before turning the tool ON. A

wrench or a key that is left attached to a rotating part of the tool may result in

personal injury.

5. Do not overreach. Keep proper footing and balance at all times.

Proper footing and balance enables better control of the tool in unexpected

situations.

6. Use safety equipment. Always wear eye protection. Dust mask, non-

skid safety shoes, hard hat, or hearing protection must be used for

appropriate conditions.

TOOLS USE AND CARE

1. Use clamps or other practical way to secure and support the

workpiece to a stable platform. Holding the work by hand or against your

body is unstable and may lead to loss of control.

2. Do not force tool. Use the correct tool for your application. The

correct tool will do the job better and safer at the rate for which it is designed.

3. Do not use tool if switch does not turn it ON or OFF. Any tool that

cannot be controlled with the switch is dangerous and must be repaired.

4. Disconnect the plug from the power source before making any

adjustments, changing accessories, or storing the tool. Such preventive

safety measures reduce the risk of starting the tool accidentally.

5. Store idle tools out of reach of children and other untrained persons.

Tools are dangerous in the hands of untrained users.

6. Maintain tools with care. Keep cutting tools sharp and clean. Properly

maintained tools, with sharp cutting edges are less likely to bind and are

easier to control.

7. Check for misalignment or binding of moving parts, breakage of

parts, and any other condition that may affect the tool’s operation. If

damaged, have the tool serviced before using. Many accidents are caused

by poorly maintained tools.

8. Use only accessories that are recommended by the manufacturer for

your model. Accessories that may be suitable for one tool may become

hazardous when used on another tool.

SERVICE

1. Tool service must be performed only by qualified repair personnel.

Service or maintenance performed by unqualified personnel could result in a

risk of injury.

2. When servicing a tool, use only identical replacement parts. Follow

instructions in the Maintenance Section of this manual. Use of unauthorized

parts or failure to follow Maintenance Instructions may create a risk of electric

shock or injury.

904374- 06-26-02.qxd 7/11/02 8:12 AM Page 3

Product specificaties

Merk:	Porter-Cable
Categorie:	Schuurmachine
Model:	7800

Heb je hulp nodig?

Als je hulp nodig hebt met Porter-Cable 7800 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Schuurmachine Porter-Cable

Porter-Cable PCCW205 Handleiding

14 Mei 2023

Porter-Cable 97455 Handleiding

7 Maart 2023

Porter-Cable 7346 Handleiding

17 Februari 2023

Porter-Cable 7345 Handleiding

30 Januari 2023

Porter-Cable 382 Handleiding

18 Januari 2023

Porter-Cable MS200 Handleiding

18 Januari 2023

Porter-Cable 7800 Handleiding

16 December 2022

Handleiding Schuurmachine

Nieuwste handleidingen voor Schuurmachine

Duro Pro D-NTS 156 Handleiding

18 April 2024

Bavaria By Einhell BES 125 E Handleiding

9 April 2024

Bavaria By Einhell BBS 850 E Handleiding

9 April 2024

Bavaria By Einhell BSS 280 Handleiding

9 April 2024

Bavaria By Einhell BBS 1200 Handleiding

9 April 2024

Bavaria By Einhell BSS 105 Handleiding

9 April 2024

Einhell Bavaria BSS 105 Handleiding

25 Maart 2024

Einhell Bavaria BBS 1200 Handleiding

25 Maart 2024

Einhell Bavaria BSS 280 Handleiding

25 Maart 2024

Einhell Bavaria BBS 850 E Handleiding

25 Maart 2024