Polk Vanishing 255c-LS Handleiding

Polk Speaker Vanishing 255c-LS

Lees hieronder de đź“– handleiding in het Nederlandse voor Polk Vanishing 255c-LS (15 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15
LS Models
265-ls
65f/x®-ls
65-ls
255c-ls
RT Models
265-rt
625-rt
65f/x®-rt
65-rt
255c-rt
For more information visit our website at www.polkaudio.com 3
IMPORTANT INFORMATION SHOULD
YOU CHOOSE TO PAINT YOUR GRILLES
Because of its ultra-thin profile, the Vanishing
Series Sheer-Grille™ requires a specific painting
procedure to ensure smooth, even coverage.
The grille scrim and perforated grille come
assembled and require no disassembly.
Paint Recommendation
We highly recommend you use a can of spray
paint matched to the wall color you want the
Sheer-Grilles to blend with.
Important Note: Never use a brush or roller to
paint the grilles, as this will clog the perf holes.
To paint the Sheer-Grille
1. Elevate the Sheer-Grille off of a flat surface.
This will ensure even coverage of the grille
frame and make it easier to pick up.
Mounting Idea: Two spray can caps will
raise the grille high enough.
2. Hold the spray paint about 12 from "
the grille and at a 45° angle.
3. Apply one light, thin coat, moving evenly
side to side over the grille, then work your
way around the perimeter of the grille
to ensure you cover the grille frame.
4. After each application of paint, wait
approximately 1 minute, rotate the
grille 90°, and apply the next thin coat.
Important Note:Youmustrotatethegrille
90°. Use your hands to define the next 90°
rotation and always rotate the grille in the
same direction of travel.
5. Three light, even applications should cover
the grille and frame adequately. Remember
to work your way around the grille frame
to cover it evenly and completely.
SURROUND SPEAKER PLACEMENT
Polk Audio F/X® surround loudspeakers give you
nearly endless placement options. But remember
that where you place your surround speakers
requires some careful thought, as installation
requires that you cut a hole in your wall or ceiling.
Diagram shows speaker locations for 5.1
and 7.1 systems, when two additional in-wall
speakers are installed in the rear wall.
Left/Right Orientation: F/X® surround loud-
speakers have a left/right orientation, and each
speaker is clearly marked on the serial number
label on the back of the magnet for installation
on either the right or left. Right and left are
defined from your listening area as you face
your system’s center channel.
Center Channel Speaker Placement
Install the 255 or 255c-ls c-rt as close as possible
to ear level. If the speaker needs to be installed
higher, aim the tweeter down as required.
Do not block the center channel with
your TV or furniture.
Please Note: For more on speaker placement go
to: www.polkaudio.com/education/article.php?id=15
or www.polkaudio.com/downloads/hthandbook.pdf
ROOM ENVIRONMENT CONTROLS
Imaging (65 model only) f x/ -ls
F/X Surround Loudspeakers offer switchable
“Diffuse” and “Solid” imaging patterns
to create the surround effect you desire.
A “Diffuse” image is defined as one which
creates a “cloud” of sound; think of the effect
as ambient sounds which fill the environment
all around you, but are less localizable.
A “Solid” image is one which creates a more pin-
point sound; sound is more localized. The location
of sounds in the sound field is more identifiable.
Tweeter Switch
(LS and RT models except F/X models)
Filter—If your listening room is very reflective,
with smooth sheetrock walls, hardwood floors,
and non-cushioned furniture, the sound will be
overly “bright” and unnatural. Selecting the “Filter”
setting compensates for the effect of reflectiv-
ity in a hard room. Tweeter attenuation flattens
room response, without hindering higher frequency
response, for warmer, more realistic sound
and more accurate imaging.
Norm—If your room is not reflective, with curtains,
artwork, lots of cushioned furniture and carpeting,
sound will be absorbed by the room, resulting in
more realistic reproduction and more accurate imag-
ing. In this case, select the tweeter “Norm” setting.
Wall Distance Switch (65f x/ -rt and
all LS Models except the Center Channel)
In-wall loudspeakers excel when placed more
than 2’ (60cm) from side walls. If position
limitations demand that in-wall loudspeakers
be installed closer than 2’ (60cm) from side walls
or ceiling, the proximity of the surface can result
in a response “bump” between 50 and 200Hz.
This can cause in-wall speakers to sound “boomy.”
The “Wall Distance” switch flattens response
and eliminates “boominess” without sacrificing
deep bass response, for more lifelike sound.
Filter / Norm
Tweeter
Wall Dist.
>2'
(60cm)(60cm)
<2'
tV
Diffuse / Solid
Imaging
4 Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com
DIMENSIONS
Model 625-rt 65-l s 65-rt
A. Overall Dimensions 14 3/8" H x 8 7/8" W
(365.1mm x 225.4mm)
14 3/8" H x 8 7/8" W
(365.1mm x 225.4mm)
14 3/8" H x 8 7/8" W
(365.1mm x 225.4mm)
B. Cutout Dimensions 12 3/4" H x 7 1/4" W
(323.9mm x 184.2mm)
12 3/4" H x 7 1/4" W
(323.9mm x 184.2mm)
12 3/4" H x 7 1/4" W
(323.9mm x 184.2mm)
C. Product Depth 3 3/8" 3 1/2" (85.7mm) (88.9mm) (88.9mm)3 1/2"
D. Mounting Depth
(using 1/2" drywall)
2 7/8" 3" (73mm) (76.2mm) (76.2mm)3"
DIMENSIONS (Center Channel)
Model 255 255c-ls c-rt
A. Overall Dimensions 9 5/16" H x 14 13/16" W
(236.5mm x 376.2mm)
9 5/16" H x 14 13/16" W
(236.5mm x 376.2mm)
B. Cutout Dimensions 7 5/8" H x 13 1/8" W
(193.7mm x 333.4mm)
7 5/8" H x 13 1/8" W
(193.7mm x 333.4mm)
C. Product Depth 3 3/4" 3 3/4" (95.3mm) (95.3mm)
D. Mounting Depth
(using 1/2" drywall)
3 1/4" 3 1/4" (82.6mm) (82.6mm)
DIMENSIONS
Model 265- 265- 65 65ls rt f x/ -ls f x/ -rt
A. Overall Dimensions 20 7/8" H x 8 7/8" W
(530.2mm x 225.4mm)
20 7/8" H x 8 7/8" W
(530.2mm x 225.4mm)
14 3/8" H x 8 7/8" W
(365.1mm x 225.4mm)
14 3/8" H x 8 7/8" W
(365.1mm x 225.4mm)
B. Cutout Dimensions 19 3/16" H x 7 1/4" W
(487.4mm x 184.2mm)
19 3/16" H x 7 1/4" W
(487.4mm x 184.2mm)
12 3/4" H x 7 1/4" W
(323.9mm x 184.2mm)
12 3/4" H x 7 1/4" W
(323.9mm x 184.2mm)
C. Product Depth 3 3/4" 3 3/4" 3 1/2" (95.3mm) (95.3mm) (88.9mm) 3 1/2" (88.9mm)
D. Mounting Depth
(using 1/2" drywall)
3 1/4" 3 1/4" (82.6mm) (82.6mm) 3" (76.2mm) 3" (76.2mm)
SPECIFIATIONS
For complete Vanishing Series specifications, visit www.polkaudio.com
WHEN TO USE THE PROvIDED PORT PLUG
Important Note: Use the provided port plug when
you are installing any of the in-wall loudspeakers
listed below in an area larger than a standard
open stud bay. Ensure the plug seats all
the way into the port.
The port plug should be used on the following
models: 265- , 65 , 65- 265 , 65 65ls f x/ -ls ls, -rt f x/ -rt & - .rt

Product specificaties

Merk: Polk
Categorie: Speaker
Model: Vanishing 255c-LS

Heb je hulp nodig?

Als je hulp nodig hebt met Polk Vanishing 255c-LS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker Polk

Polk

Polk ES90 Handleiding

13 November 2023
Polk

Polk PA D4000.4 Handleiding

20 Juli 2023
Polk

Polk TSi200 Handleiding

13 Juni 2023
Polk

Polk Monitor XT90 Handleiding

11 Juni 2023
Polk

Polk TSX330 Handleiding

1 Juni 2023
Polk

Polk RTi A7 Handleiding

28 Mei 2023
Polk

Polk Vanishing 255c-RT Handleiding

26 Mei 2023
Polk

Polk T30 Handleiding

14 Mei 2023
Polk

Polk S50 Handleiding

13 Mei 2023
Polk

Polk S15 Handleiding

13 Mei 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata III Handleiding

20 April 2024
Soen

Soen Transit Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP300RC Handleiding

18 April 2024
Soen

Soen Transit XS Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP7 Handleiding

18 April 2024
Qian

Qian QRBT1801 Handleiding

17 April 2024
Focal

Focal Twin6 Handleiding

17 April 2024
Kenwood

Kenwood KFC-WPS1000F Handleiding

16 April 2024