Polaroid Mod Handleiding
Pagina's 8 Niet gecategoriseerd
Bekijk de handleiding van Polaroid Mod gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
User Manual
Flash
Camera Lens
Shutter Button
Self-timer LED
Light Meter
Film Shield
Mode Dial
Brightness Dial
Film Door Button
Flash ON|OFF
Film Counter LED
Self-timer
Viewnder
Strap attachment points
Camera Functions
Film Counter Display
2
Getting Started
1. Open the Polaroid Mod box and check that you have
everything you need:
• Polaroid Mod Camera
• Quick Start Guide
• Camera Neck Strap
• Split Filter Accessory
• Safety & Compliance booklet
2. Charge your camera
For safe transportation, the Polaroid Mod won’t be fully
charged when you receive it. To charge it, use any standard
USB-C charger (5V/1A). We don’t recommend charging via
a laptop. The battery level indicator LED will blink while the
camera is plugged in and charging. It will turn off once the
camera is fully charged.
A full charge usually takes about 2 hours through a wall
socket with a USB power adapter. A fully-charged Polaroid
Mod will have enough power to shoot 15 packs of lm,
depending on usage. Remember to turn off the Polaroid Mod
after use to save battery life.
3. Attach your neck strap
4. Find your instant lm
The Polaroid Mod uses i-Type and 600 instant lm. Get that
iconic Polaroid frame in color, black and white, or with our
special edition frames. Find your next lm here. Then you’re
ready to take your rst Polaroid photograph.
How To Take
Your First Photo
1. Turn Mode Dial to auto
The lm counter display will show the number ‘0’ because
there is currently no lm in the camera.
2. Insert your lm pack
Push the lm door button to open the lm door, then insert
the lm pack into lm chamber of your camera. Push the
lm pack all the way in with the darkslide facing up and the
tab facing toward you. Close the lm door. The darkslide will
eject. Remove the darkslide and allow the lm shield to roll
back in. This shield is designed to protect images from light
as they develop, so don’t remove it. If the darkslide has not
ejected, remove the lm pack and re-insert it to make sure it
is pushed all the way into the back of the camera.
We recommend using i-Type lm as the camera is optimized
for use with this particular lm.
To make sure the camera always displays the right lm
count, always nish the lm pack before inserting a new
one. If you decide to switch packs anyway, be aware that
one photo will be wasted as it will be exposed to light.
That’s why every pack has a darkslide.
3. Set the ash mode
In any situation where you are not shooting in bright, direct
sunlight, we recommend using the ash to achieve the best
shots. That’s why the ash will trigger by default every time
you use the Polaroid Mod.
Shooting without the ash can give you some beautiful
results as well, but remember you need another source of
light to make sure your photo will turn out. To shoot without
the ash, press the ash button on the back panel once.
After taking the photo the ash will be reenabled. To disable
the ash until you power off the camera, double press the
ash button.
4. Position yourself
Make sure you are at least 55cm (1.8ft) away from your
subject.
5. Aim at your subject
The Polaroid Mod uses a viewnder located on the left side
of the lens barrel. To aim at your subject, simply align your
eye with the viewnder barrel and use the image you see
to compose your shot.
3
Product specificaties
| Merk: | Polaroid |
| Categorie: | Niet gecategoriseerd |
| Model: | Mod |
Heb je hulp nodig?
Als je hulp nodig hebt met Polaroid Mod stel dan hieronder een vraag en andere gebruikers zullen je antwoorden