Planet GSD-804 Handleiding

Bekijk gratis de handleiding van Planet GSD-804 (2 pagina’s), behorend tot de categorie Csavaros gép. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.4 sterren uit 4 reviews. Heb je een vraag over Planet GSD-804 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

6. Installing the Switch

This part describes how to install your Gigabit Ethernet

Switch and make connections to it. Please read the

following topics and perform the procedures in the order

being presented.

Note

This Switch does not need software configu� not need software configu�

ration.

Desktop Installation

To install the Switch on desktop, simply follow the next

steps:

Step 1:Place the Switch on desktop near an AC power

source.

Step 2:Keep enough ventilation space between the

Switch and the surrounding objects.

Note

When choosing a location, please keep in

mind the environmental restrictions dis�

cussed in Chapter 7. Product Specifications.

1. Package Contents

Check the contents of your package for following parts:

Gigabit Ethernet

Switch x 1

DC 5V

1A Power

Adapter x 1

User’s

Manual x 1

If any of these are missing or damaged, please contact

your dealer immediately, if possible, retain the carton

including the original packing material, and use them

against to repack the product in case there is a need to

return it to us for repair.

3. Switch Top Panel

Figure 3�1 & 3�2 shows a Top panel of GSD�504 /

GSD�804.

Figure 3-1: GSD-504 Top panel

Figure 3-2: GSD-804 Top panel

5. Switch Rear Panel

Figure 5�1 & 5�2 shows a rear panel of GSD�504 /

GSD�804.

13542

Figure 5-1: GSD-504 rear panel

13574682

Figure 5-2: GSD-804 rear panel

2. Product Features

Comply with IEEE 802.3, 10Base�T, IEEE 802.3u

100Base�TX, IEEE 802.3ab 1000Base�T

Power Saving ability for Green networking

5/8�Port 10/100/1000Mbps Gigabit Ethernet ports

Features Store�and�Forward mode with wire�speed

ltering and forwarding rates

Hardware based 10/100Mbps, Half / Full Duplex and

1000Mbps Full Duplex mode, Flow Control and Auto�

negotiation

IEEE 802.3x Flow Control for Full Duplex operation

and Back pressure for Half Duplex operation

Integrated address look�up engine, support 8K

absolute MAC addresses

Automatic Address Learning and Address Aging

9K Jumbo packet size

Supports Auto MDI/MDI�X function

Support CSMA/CD protocol

FCC, CE class B compliant

4. LED Indicators

Figure 4�1 & 4�2 shows a LED panel of GSD�504 /

GSD�804.

Figure 4-1: GSD-504 LED panel

Figure 4-2: GSD-804 LED panel

LEDColorFunction

PWRGreen

Light

Indicate that the Switch is

Powered ON.

OFF

Indicate that the Switch is

Powered OFF.

Link/ACTGreen

Light

Indicates the link

through that port is

successfully established at

10/100/1000Mbps.

Blink

Indicates the Switch is

actively sending or receiving

data over that port.

Step3:Connect your Switch to network devices.

A. Connect one end of a standard network

cable to the 10/100/1000 RJ�45 ports on

the rear panel of the Switch.

B. Connect the other end of the cable to the

network devices such as printer servers,

workstations or routers…etc.

Step4:Supply power to the Switch.

A. Connect one end of the power cable to the

Switch.

B. Connect the 5V DC power adapter to a

standard wall outlet.

When the Switch receives power, the Power LED should

remain solid Green.

PC/Laptop

xDSL/Cable Router

Internet

Power Adapter

RJ-45

RJ-45

Power

001101010

13574682

Power

Notice

1. The device is a power�required device, it

means, it will not work till it is powered.

If your networks should active all the

time, please consider using UPS (Uninter�

rupted Power Supply) for your device. It

will prevent you from network data loss

or network downtime.

2. In some area, installing a surge suppres�

sion device may also help to protect your

Switch from being damaged by unregu�

lated surge or current to the Switch or

the power adapter.

Product specificaties