Planet FNSW-1601 Handleiding

Bekijk gratis de handleiding van Planet FNSW-1601 (2 pagina’s), behorend tot de categorie Csavaros gép. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.9 sterren uit 6 reviews. Heb je een vraag over Planet FNSW-1601 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET 16-/24-Port

10/100BASE-TX Unmanaged Fast Ethernet Switch, FNSW-

1601/FNSW-2401. “Fast Ethernet Switch” mentioned in

this User’s Manual refers to the FNSW-1601/FNSW-2401.

Open the box of the Fast Ethernet Switch and carefully

unpack it. The box should contain the following items:

Fast Ethernet Switch x 1User’s Manual x 1

Power Cord x 1Accessories x 1

If any of these are missing or damaged, please contact

your dealer immediately; if possible, retain the carton

including the original packing material, and use them again

to repack the product in case there is a need to return it to

us for repair.

3. Product Specications

ProductFNSW-1601FNSW-2401

Hardware Specications

Hardware VersionV9V11

10/100BASE-TX MDI/

MDIX Ports

1624

Throughput

(packet per second)

2.38Mpps3.57Mpps

Switch Fabric3.2Gbps4.8Gbps

Weight1.3kg1.4kg

Power Consumption/

Dissipation

2.5 watts/

8.5BTU

3.5 watts/

11.9BTU

Power Requirements100~240V AC, 0.2A, 50-60Hz

Dimensions

(W x D x H)

440 x 140 x 44mm, 1U height

Switch Processing

Scheme

Store-and-Forward

Address Table8K entries

Maximum Packet Size1522bytes

Flow Control

Back pressure for half duplex,

IEEE 802.3x Pause Frame for full

duplex

DIP Switch

Mode

Function

VLAN

This mode makes the

FNSW-1601 operate

as a VLAN isolation

switch and

1. Port 1 to port

14 will isolate

respectively.

2. Port 1 to port

14 can only

communicate with

port 15 and port 16

(uplink port).

This mode makes the

FNSW-2401 operate

as a VLAN isolation

switch and

1. Port 1 to port

22 will isolate

respectively.

2. Port 1 to port

22 can only

communicate with

port 23 and port 24

(uplink port).

Extend

This mode makes

the FNSW-1601

operate as a distance

extension switch and

port 1 to port 8 can

only transmit distance

of 200m at speed of

10Mbps.

This mode makes

the FNSW-2401

operate as a distance

extension switch and

port 1 to port 8 can

only transmit distance

of 200m at speed of

10Mbps.

Note

Change the DIP switch setting and the Fast

Ethernet switch will reset automatically to take

effect.

4. Switch Front Panel

Figures 1 & 2 show the front panels of the FNSW-1601 and

FNSW-2401.

2468

1357

10121416

9111315

ACTLNK10/100

13579111315

2

PWR

46810121416

FNSW-1601

16-Port 10/100TX Fast Ethernet Switch

Standard

Flow Control Off

Extend

VLAN

Figure 1: FNSW-1601 Front Panel

2468

1357

10121416

9111315

18202224

17192123

ACTLNK10/100

1357911131517192123

2

PWR

4681012141618202224

FNSW-2401

24-Port 10/100TX Fast Ethernet Switch

Standard

Flow Control Off

Extend

VLAN

Figure 2: FNSW-2401 Front Panel

LED Indicators

FNSW-1601/FNSW-2401

System

LEDColorFunction

PWRGreen

Lights: to indicate that the Switch has

power.

2. Product Features

Physical Port

● 16/24 10/100BASE-TX Fast Ethernet ports

● Supports auto MDI/MDI-X function

Layer 2 Features

● Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u

100BASE-TX Ethernet standards

● Features Store-and-Forward mode with wire-speed ltering

and forwarding rates

● Integrated address look-up engine, supporting 8K abso-

lute MAC addresses

● Power saving ability for Green networking

● IEEE 802.1Q VLAN packet transparency support

● IEEE 802.3x ow control for full duplex operation and

back pressure for half duplex operation

● Hardware-based 10/100BASE-TX, half/full duplex, ow

control and auto-negotiation

● Automatic address learning and address aging

● Supports CSMA/CD protocol

Hardware Features

● 100~240V AC, 0.2A, 50~60Hz universal power input

● DIP switch for standard/ow control o/VLAN/Extend

mode selection

● FCC, CE class A compliant

DIP Switch

Standard/ow control o/VLAN/

Extend mode selection

Temperature

Operating: 0~50 degrees C

Storage: -10~70 degrees C

Humidity

Operating: 5% to 95%

(non-condensing)

Storage: 5% to 95%

(non-condensing)

Standards Conformance

Regulatory ComplianceFCC Part 15 Class A, CE

Standards Compliance

IEEE 802.3 (Ethernet)

IEEE 802.3u (Fast Ethernet)

IEEE 802.3x (Full-Duplex Flow

Control)

IEEE 802.3az Energy Ecient

Ethernet (EEE)

Per 10/100BASE-TX Port

LEDColorFunction

10/100

LNK/ACT

Green

Lights: to indicate the link through

that port is established successfully at

10/100Mbps.

Blinks: to indicate that the Switch is

actively sending or receiving data over

that port.

DIP Switch

The front panel of Fast Ethernet Switch provides one DIP

switch for “Standard”, “Flow Control O”, “VLAN” and

“Extend” mode selections. The detailed descriptions are

shown in the following table.

DIP Switch

Mode

Function

Standard

(default)

This mode makes the Fast Ethernet Switch

operate as a general switch and all ports

operate at 10/100Mbps auto-negotiation.

Flow

Control O

This mode disables the Fast Ethernet

Switch ow control function.

5. Switch Rear Panel

Figure 3 shows the rear panel of the FNSW-1601/FNSW-

2401.

100~240V AC

50 / 60Hz

Figure 3: FNSW-1601/FNSW-2401 Rear Panel

Power

Note

1. The device is a power-required device,

meaning it will not work till it is powered. If

your network should be active all the time,

please consider using UPS (Uninterrupted

Power Supply) for your device. It will

prevent you from network data loss or

network downtime.

2. In some areas, installing a surge suppression

device may also help to protect your Fast

Ethernet Switch from being damaged by

unregulated surge or current to the Switch.

Product specificaties