Planet Audio PM30B Handleiding
Bekijk gratis de handleiding van Planet Audio PM30B (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.3 sterren uit 2.5 reviews. Heb je een vraag over Planet Audio PM30B of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
Installation
Connect all wiring harness and slide the head unit into the
mounting sleeve until it clicks into place.
Wiring Connections
ANT
F-R R-R
F-L R-L
10
Radio Antenna
White
Front Left
Speaker
Rear Left
Speaker
Front Right
Speaker
Rear Right
Speaker
White/Black
ACC + (Red)
GND - (Black)
ANT + (Blue)
Power B+ (Yellow)
Gray/Black
Purple
Purple/Black
Green
Green/Black
Gray
Red: Front Right PRE-AMP Output
White: Front Left PRE-AMP Output
White: Rear Left PRE-AMP Output
Red: Rear Right PRE-AMP Output
Installation
Installation Procedures
First complete the electrical connections and then check for correctness of
connection.
Insert the mounting sleeve into the dashboard. Then bend the tabs
on the mounting sleeve with a screwdriver to achieve fastening of
the mounting sleeve.
Make sure that lock lever is flush with the mounting sleeve( not
projecting outward).
Installation Opening
This unit can be installed in any dashboard which has an opening as shown
below.
2.05 inches
7.20 inches
B ket keyrac
Mounting sleeve
B ket keyrac
Plastic trim out
1.
2.
3.
5.
6.
7.
9.
10.
11.
12.
13.
15.
Turn Unit on/off, Change the Source
• Press the button to turn on the unit. Press and hold the /SRC /SRC
button to turn off the unit.
• Press the button to select the different modes: Radio, USB(with/SRC
USB device inserted), AUX-IN(auxiliary input) and BT(Bluetooth) modes.
Adjust the volume
Rotate the volume knob to increase or decrease the volume level.
Push-To-Talk
Press the button (volume knob) to access to smartphones voice assistant
capability via Bluetooth.
Overview of the Components
General Operation
(power) / SRC (source) button
VOL (volume) knob, (Push-To-Talk) button, SEL (select/menu) button
BAND button, (answer call) button
(pause/play), Preset station 1 button
RPT (repeat), Preset station 3 button
-10(previous 10 tracks), previous folder, Preset station 5 button
INT (intro), Preset station 2 button
RDM (random), Preset station 4 button8.
+10(next 10 tracks), next folder, Preset station 6 button
CLK (clock setting), (end call) button
(tune/seek down, previous track, fast reverse) button
(tune/ seek up, next track, fast forward) button 14. EQ (Equalizer) button
Hands-free Microphone 16. MUTE button 17. Loud(Loudness) button
18. LCD Display 19. USB Port 20. AUX IN(aux audio input)jack 21. Reset button
Adjust Menu Options
• Press and hold the volume knob to enter into setting menu, then press the
volume knob repeatedly to select setting items:
- ILL MID/HI/LOW: This receiver is equipped with 3 brightness settings.
Rotate the volume knob to preset the illumination to middle, high or low.
- BASS/TREBLE:-7, -6, ~, 1, 0, +1,~, +6, +7
- BALANCE:L7, L6,~, L1, 0, R1,~,R6, R7
- FADER:R7, R6, ~, R1, 0, F1, ~ ,F6, F7
- Loudness: LOUD ON/OFF
- EQ(Equalizer) Setting: OFF, FLAT, CLASSIC, POP, ROCK, JAZZ
- Stereo/Mono: Switches between MONO and STEREO reception mode
for radio frequencies.
- DX/LOCAL: Enables or disables the local broadcast mode (LOCAL).
- CLOCK 12/24: Select between 12 hours and 24 hours display.
- AREA US/EU: This car radio is equipped the USA / Europe frequency.
Rotate the volume knob to switch between USA and Europe frequency.
• Rotate the volume knob to change values.
Setting the Clock
Press the button to display time. Press and hold the button the CLK CLK
hours digits start flashing on the display. Set hours by rotating the volume
knob. Briefly press the button. The minute digits start flashing. CLK
Set minutes by rotating the volume knob.
Mute On/Off
In power on mode, briefly press the button to toggle mute on or off. MUTE
Preset EQ (Equalizer)
Press the button to toggle: OFF, FLAT, CLASSIC, POP, ROCK, JAZZ.EQ
Loudness on/off
Press the button to turn on the loudness to reinforce the output of bass LOUD
frequencies, press againto turn it off.
USB Port
Connect to a USB device for audio play, or charging of a mobile phone.
Hands-free Microphone
To receive your voice when you calling by using this bluetooth handsfree
system.
Aux Audio Input Jack
Connect to the headphone jack on an external device (e.g. a mobile phone
or MP3 player) for audio play.
General Operation General Operation
Radio Operation
Switch Between USA area and Europe area Frequency
In radio mode, press and hold the button (volume knob) to enter settingSEL
menu, then press the volume knob repeatedly to access the state of the USA
and Europe frequency, then rotate the volume knob to switch between USA
and europe frequency. The system will change the frequency setting in about
3 seconds.
Change Bands
In radio mode, shortly press the button to switch between theBAND
FM1(F1), FM2(F2), FM3(F3) and AM1(A1), AM2(A2) bands.
To Store / Recall Preset Stations
The radio can be stored 6 preset stations for each band (FM1, FM2, FM3,
AM1 and AM2) for a total of 30 preset stations.
- To memorize a station:
Press and hold the desired preset buttons (1-6) to save a radio station.
- To recall a preset station:
Briefly press the respective station button (1-6) to recall the corresponding
preset station.
Manual Tuning
In the radio mode:
Press and hold the or button to enter the manual tuning mode.
In manual tuning mode, briefly press the or button to search the next
or previous frequency step by step.
Seek Tuning
In radio mode, press the or button, the automatic search will start, it
will search upward or downward for the strong signal radio station within the
current band. The auto searching will stop until find a station.
Automatic Store Preset station (AMS)
Press and hold the button to store 18 FM stations and 12 AM stations AMS
automatically.
press the button to recall each preset station that stored in the AMS
memories in each band.
Reset
Push the button with a thin object with a pointed end to reset the unit.RESET
This function may be used when the LCD does not display normally or sound
is distorted, or when any of controls are disabled.
- Only support speakers of 4 ohms or above.
- +12V DC Negative Ground.
- The maximum current of the Amp remote trigger is 200mA.
- The equipment shall be protected by the circuit with max. 10
Amperes of the front end of DC source.
4. AMS(automatic store station, preset station scan, automatic music search)
USB Operation
Play MP3/WMA music inside a USB stick. Insert the USB stick with MP3
/WMA musics into the USB port, it will play automatically.
Note: the USB port also supports charging mobile phone, the maximum
charging ability is 5V/1A.
Select Next Track or Previous Track
In the USB mode, briefly press the or button to play the the next or
previou track.
Fast Forward/Reverse
Press and hold the or button to fast forward or reverse a track.
Play / Pause
Press the button to interrupt the playback of a music (pause function).
Press this button again to continue the playback.
Introduction Scan
Press the button to play the first 10 seconds of each track. INT
Press again to stop the introduction scan, and play the current track.
Repeating the track
Press the button to toggle between RPT ONE (Continuously repeat RPT
current track) and RPT FOD (Continuously repeat all tracks in current folder),
RPT ALL (Play all track).
Playing all tracks in random
Press once, play all tracks randomly. RDM
Press once again, exit from random playback.RDM
Track/Folder Navigation
- Press the buttons to jump 10 tracks backward or forward. -10/+10
It is required that over 10 tracks be available on the storage medium.
- Press and hold the / button to select the previous or the next folder. -10 +10
(If there are folders on the storage medium.)
Select the track or file for playback in MP3 format
a) Press the button to enter track search mode. AMS
b) Rotate the volume knob to select the number of your favorite track with
high speed.
c) When the desired track number appears, confirm your selection by
pressing the access the knob.
Using this socket, it is possible to hear the sound of other playback devices
such as MP3 players, CD players etc. through the car loudspeaker.
1. Please connect the external device with a 3.5 mm stereo jack plug to the
AUX socket.
2. Press the button repeatedly until “AUX IN” appears in the display.SRC
3. You hear the playback from the external device via the loudspeakers.
You can adjust the volume of the external device to a comfortable level with
the volume control of this device.
Aux Audio Operation
Bluetooth Operation
Pair and Connect
Pair the mobile phone with the device before using it.
1. In any mode, prior to pairing and connecting, the BT logo is flashing in the
LCD indicating that no device is connected. To begin pairing, enable BT
mode on your mobile phone.
2. When the phone finds the car audio system, the “PLANET AUDIO PM30B”
name will be displayed.
3. Choose the “PLANET AUDIO PM30B” from the device list to pair and
connect with the car audio system. Upon confirming, the BT logo will stop
flashing.
4. When pairing is complete, the mobile phone audio will automatically
transfer to the car audio system whenever a call is made or received, or
when the mobile phone plays music.
Disconnect or reconnect the bluetooth connection
Press and hold the button to disconnect or reconnect the bluetooth
connection.
Answer a Call
• When the mobile phone is called, the incoming telephone number displays
on the LCD.
• To receive the call, press the button on the front panel.
Reject or End a Call
To reject or end the call, press the button on the front panel.
Redial Last Dialed Number
Press the button on the front panel to redial the last dialed phone number.
Bluetooth Operation
Switch Audio Between Car Audio and mobile Phone
During a call, press the volume knob to switch the audio source from the car
audio system back to your mobile phone.
Audio Streaming (A2DP)
The unit supports A2DP (advanced audio distribution profile) wireless
streaming audio from your Bluetooth mobile device directly to your head unit.
You can also control your music from the front panel of the head unit using
AVRCP (audio video remote control profile).
1. After pairing, connecting and enabling streaming audio from a compatible
mobile device,
press the button to enter BT mode and the “BT AUDIO” will be shown SRC
on the LCD display.
2. When a mobile device is paired, music played through that device will
automatically be heard through the car audio system.
3. Press the or button to play the next or previous on the mobile
phone.
4. Press the button to pause or resume music playback.
Push-To-Talk
This Push-To-Talk feature allows direct access to Android and IOS smart-
phones voice assistant capability when user establish the bluetooth
connection between user’s smartphone and this receiver.
Simply connect directly from this receiver via Bluetooth with button
(volume knob).
Note:
Before using the Push-To-Talk, user must enable the mobile data on user’s
smartphone.
To use the navigation feature, switch to the BT Audio source to hear voice
commands over your vehicles speakers.
Specifications
General
Power supply Requirement : DC 12V
Maximum power output : 50W X 4CH
Speaker impedance : 4 - 8 Ohm
Unit Dimensions(WxHxD) : 7.0 X 2.0 X 2.76 inches
Weight : 0.84 Lb
Fuse : 10 A
FM
Frequency Range: 87.5 MHz - 107.9 MHz (USA)
87.5 MHz - 108.0 MHz (EUROPE)
Channel step: 200 KHz (USA)
50 KHz (EUROPE)
AM
Frequency Range: 530 KHz - 1710 KHz (USA)
522-1620 KHz (EUROPE)
Channel step: 10 KHz (USA)
9 KHz (EUROPE)
USB
RADIO
Usable Audio Formats: MP3/WMA
Pre-amp Output: Front and Rear
Frequency Response: 20 Hz - 20KHz
S/N Ratio: 60dB
USB Port Type: 2.0
USB Charging: 5V/1A
BT
BT Profile supports: Headset, Handsfree and A2DP & AVRCP
Range of frequency: 2.4GHz
Troubleshooting
If u t g is , y h r off. yo suspec somethin wrong immediatel switc powe
Do t e e t in l , r e t ,no us th uni abnorma condition fo exampl withou sound
or h e or l e e or c wit smok fou smell. Otherwise this can caus fir electri
shock.
Immediatel sto usin an cal th stor wher yo purchase ity p g it d l e e e u d .
Neve tr repai th uni yoursel becaus dangerour y to r e t by f e it is s to do
so.
T n u s y to C or .ur yo car' ke AC ON
Chec th connectionk e .
Replac fusee .
Chec volum mut on/o adjus volum desire levelk e or e ff, t e to a d .
General
1) s e h is t .Car' engin switc no on
2) e is t y .Cabl no correctl connected
3) e is .Fus burnt
4) V e is in e or .olum mut minimum
Th built-i micro compute no operatin properl du noisee n - r is t g y e to .
Pres th RESE butto restor th progra zeros e T n to e e m to .
Statio signa to weak Selec othe station strongen or l is o . t r s of r
signa levell .
Inser th antenn cabl firml int th antenn socke thi cat e a e y o e a t of s r
radio.
Batter cabl no correctl connected Connec th battery e is t y . t e y
cabl th termina thae to e l t is always live.
a) B n is t . TUS connectio no good ak ou an inser againe it t d t .
b) B is d or no c e .US damage musi fil inside
Change to another USB, or recor
d c e .musi insid it
5) The operation keys do not work.
Radio
1) h e in .Muc nois broadcasts
2) The antenna cable is not connected.
3) t n is .Prese statio reset
USB
US connectin bu sounB is g t no d
Product specificaties
| Merk: | Planet Audio |
| Categorie: | Niet gecategoriseerd |
| Model: | PM30B |
Heb je hulp nodig?
Als je hulp nodig hebt met Planet Audio PM30B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Planet Audio
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
Handleiding Niet gecategoriseerd
- Freewell
- Grizzly
- ASSA ABLOY
- GoldAir
- Yeyian
- Sencys
- Paingone
- Kohler
- Kambrook
- Sony Optiarc
- Intesis
- Neumärker
- Bavaria
- Evolis
- Bliss Outdoors
Nieuwste handleidingen voor Niet gecategoriseerd
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025