Pioneer PLX-1000 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Pioneer PLX-1000 (20 pagina's) in de categorie Platenspeler. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
TURNTABLE
PLX-1000
Operating Instructions
http://pioneerdj.com/support/
The oneer DJ support site shown above offers Qs, information on so ware and various other types of Pi FA ft
information and services to allow you to use your product in greater comfort.
WARNING
This equipment is not waterproof
. prevent a fire or To
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture
.
D3-4-2-1-3_A1_En
Voltage selector
You can find the voltage selector switch on the top
panel of multi-voltage models.
The factory setting for the voltage selector is
110-120 Please set it to the correct voltage for V.
your country or region.
‱ For iwan, please set to 110-120 V before using.Ta
Before changing the voltage, disconnect the AC power
cord. Use a medium size screwdriver to change the
voltage selector switch.
D3-4-2-1-5*_A2_En
WARNING
This product equipped with a three-wire grounding
(earthed) plug - a plug that has a third (grounding) pi
n.
This plug only fits a grounding-type power outlet. If you
are unable to insert the plug into an outlet, contact a
licensed electrician to replace the outlet with a properly
grounded one. Do not defeat the safety purpose of the
grounding plug.
D3-4-2-1-6_A1_En
Operating Envir
onment
Operating environment temperature and humidit
y:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light).
D3-4-2-1-7c*_A2_En
CAUTION
The switch on this unit will not completely POWER
shut off all power from the AC outlet. Since the power
cord serves as the main disconnect device for the
unit, you will need to unplug it from the AC outlet to
shut down all power. Therefore, make sure the unit
has been installed so that the power cord can be
easily unplugged from the AC outlet in case of an
accident. avoid fire hazard, the power cord should To
also be unplugged from the AC outlet when le ft
unused for a long period of time (for example, when
on vacation).
D3-4-2-2-2a*_A1_En
CAUTION
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL. D3-4-2-1-1_B1_En
Information to User
Alterations or modifications carried out without
appropriate authorization may invalidate the user’s
right to operate the equipment.
D8-10-2_A1_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat radiation
(at least 15 cm at top, 5 cm at rear, and 5 cm at each
side).
D3-4-2-1-7d*_A1_En
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to rt 15 Pa
of the FCC les. These limits are designed to provide reasonable protection against harmful inte erence in a Ru rf
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. Howeve r,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
— orient or relocate the receiving antenna.Re
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_A1_En
WARNING
Store small parts out of the reach of children and
infants. If accidentally swallowed, contact a doctor
immediately
.
D41-6-4_A1_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002*_A1_En
For U.S.A. and Canada
NOTE
THE NO USER-SERVICEABLE RTS PA
COMPARTMENT RNING IS CATED ON THE WA LO
APPLIANCE BOTTOM.
D3-7-13-68_A1_En
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT
D3-4-2-1-1b_A1_En
WARNING
To
prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1_En
Ce point d’exclamation, placĂ© dans un
triangle Ă©quilatĂ©ral, a pour but d’attirer
l’attention de l’utilisateur sur la prĂ©sence,
dans les documents qui accompagnent
l’appareil, d’explications importantes du
point de vue de l’exploitation ou de
l’entretien.
Ce symbole de l’éclair, placĂ© dans un
triangle Ă©quilatĂ©ral, a pour but d’attirer
l’attention de l’utilisateur sur la prĂ©sence, Ă 
l’intĂ©rieur du coffret de l’appareil, de
“tensions dangereuses” non isolĂ©es d’une
grandeur suffisante pour représenter un
risque d’électrocution pour les ĂȘtres
humains.
ATTENTION :
POUR ÉVITER TOUT RISQUE
D’ÉLECTROCUTION, NE PAS ENLEVER LE
COUVERCLE (NI LE PANNEAU ARRIÈRE).
AUCUNE PIÈCE RÉPARABLE R PA
L’UTILISATEUR NE SE TROUVE À
L’INTÉRIEU CONFIER TOUT ENTRETIEN À R.
UN PERSONNEL QUALIFIÉ UNIQUEMENT.
ATTENTION
DANGER DÂŽELECTROCUTION
NE PAS OUVRIR
IMPORTANT
D3-4-2-1-1b_A1_Fr


Product specificaties

Merk: Pioneer
Categorie: Platenspeler
Model: PLX-1000
Kleur van het product: Zwart
Gewicht: 13100 g
Breedte: 452.88 mm
Diepte: 352.8 mm
Hoogte: 158.75 mm
Soort: Draaitafel (dj) met directe aandrijving
Gebruikershandleiding: Ja
Aantal snelheden: 3
USB-poort: Nee
Certificering: CE
Vorm: S-vormige toonarm
Opstarttijd: 0.3 s
Signaal/ruis-verhouding: 70 dB
Nominale snelheid: 33 1/3, 45 RPM
Apparaat-slot: Ja
AC-ingangsspanning: 110 - 240 V
AC-ingangsfrequentie: 50/60 Hz
Stroomverbruik (typisch): 9 W
Line outputs (RCA): 1
Draaiplateau materiaal: Aluminium
Snelheidsfluctuaties: 0.1 procent
Stylus druk: 4 g
Naaldhouder: Ja
Startmoment: 4.5 kg/cm

Heb je hulp nodig?

Als je hulp nodig hebt met Pioneer PLX-1000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Platenspeler Pioneer

Handleiding Platenspeler

Nieuwste handleidingen voor Platenspeler