Pioneer PDP-S51 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Pioneer PDP-S51 (12 pagina's) in de categorie Luidspreker. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
PDP-S51
Operating Instructions
Mode d’emploi
Speaker System
Enceintes acoustiques
English
2
Thank you for buying this Pioneer product.
Please read through these operating instructions before
using your speaker system so you will know how to make
the most of its performance. After you have finished
reading the instructions, put them away in a safe place for
future reference.
WARNING: Handling the power cord on this product or
cords associated with accessories sold with the product
will expose you to lead, a chemical known to the State
of California and other governmental entities to cause
cancer and birth defects or other reproductive harm.
Wash hands after handling.
CAUTION
About compatibility
This product is designed exclusively for use with the
Pioneer Plasma Display. For more information on
compatibility, please consult with your nearest Pioneer
authorized dealer or service center.
About installation and setting
÷Attach the Plasma Display to the stand before installing
the speakers. See the Operating Instructions packed
together with the stand for how to assemble the stand.
÷Do not lift up the display by the speakers. A speaker
may come off, so carry the display by holding it by the
top and its handle.
÷When installing the speaker, do not use any screws
other than those supplied, otherwise the speaker may
come off from the main unit and fall over.
÷When installing the speaker, tighten the screws firmly.
÷Please handle the speaker with sufficient care, as the
grille net and the cabinet can become damaged or
broken when they are subjected to strong external
impacts.
÷Placing a CRT computer screen or CRT monitor near to
the speaker may result in interference or color
distortion. If this happens, distance the monitor from
the speaker.
About the input
÷In order to prevent damage to the speaker system
resulting from input overload, please observe the
following precautions:
÷Do not use the speaker with anything other than the
specified Pioneer Plasma Display. Doing so may result
in damage or fire.
÷Be sure to turn the connected devices off and remove
the power cord from the wall outlet beforehand when
changing the connection or installation method.
÷When using a tone control function to greatly
emphasize treble sounds, do not use excessive
amplifier volume.
Installation
÷Consult your dealer if you encounter any difficulties
with this installation.
÷Pioneer is not liable for any damage resulting from
improper installation, improper use, modification, or
natural disasters.
CHECKING THE ACCESSORIES
7Speaker Cable × 2
7
Speakers Mounting Screw (M4 × 10 mm: Black) × 8
7
Speakers Mounting Screw (M5 × 10 mm: Black) × 8
7Speaker Mounting Bracket
7
Cushions ×
2
7Operating Instructions × 1
For LEFT-TOP
For LEFT-BOTTOM
For RIGHT-BOTTOM
For RIGHT-TOP
3
English
English
MOUNTING THE SPEAKERS
TO YOUR PLASMA DISPLAY
NOTE:
The diagram depicts the mounting of the right
speaker. The left speaker mounts in the same way.
1. 1Attach the speakers to the speakers mounting
bracket (top and bottom) with the speakers
mounting screws (M4 ×10 mm).
2Remove the seals from the cushions and then
attach the cushions to the sides of the speakers
in the locations indicated in the diagram below.
Speakers Mounting
Screw (M4 × 10 mm)
Speakers Mounting
Screw (M4 × 10 mm)
Speaker Mounting
Bracket (For
RIGHT-TOP)
Speaker Mounting
Bracket (For RIGHT-
BOTTOM) Tighten the bottom speaker
mounting bracket to the display
temporarily (one place bottom).
After passing the wide part of the
hole over the screw, lower the
speaker.
3. Hang the speaker mounting bracket on the screw
you installed at the top by passing the wide part
over it and lowering into the slot; screw in the
lower screw temporarily.
After passing the wide part of the hole of the speaker
mounting bracket (top) over the screw, lower the
speaker onto it.
2. Loosely attach the speakers mounting screws
(M5 ×10 mm) to the plasma display (one location
on the left and one on the right).
Do not tighten it all the way yet. Leave it loose, with
about 5 mm left to tighten.
4. Adjust the position of the speaker and then fix the
upper and lower screws firmly.
• Adjust the positions of the speakers and the Plasma
Display so their top surfaces are the same height.
• Adjust the positions of the speakers and the Plasma
Display so their side surfaces are parallel.
5. Tighten the two screws, at the top and bottom for
each speaker (total of four screws), thus fixing the
speakers to the display.
Top, Back of
Display
5 mm
Leave a space of about 5 mm
Speakers Mounting Screw
(M5 × 10 mm)
Speakers Mounting Screw
(M5 × 10 mm)
Speakers Mounting Screw
(M5 × 10 mm)
Speakers Mounting Screw
(M5 × 10 mm)
Speaker R
Speaker L
Cushion
Cushion


Product specificaties

Merk: Pioneer
Categorie: Luidspreker
Model: PDP-S51

Heb je hulp nodig?

Als je hulp nodig hebt met Pioneer PDP-S51 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Luidspreker Pioneer

Handleiding Luidspreker

Nieuwste handleidingen voor Luidspreker