Pioneer pdp-s39 Handleiding

Pioneer Luidspreker pdp-s39

Lees hieronder de 📖 handleiding in het Nederlandse voor Pioneer pdp-s39 (39 pagina's) in de categorie Luidspreker. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/39

PDP-S39

Operating Instructions

Mode d’emploi

Bedienungsanleitung

Istruzioni per l’uso

Gebruiksaanwijzing

Manual de instrucciones

Speaker System

Enceintes acoustiques

Lautsprechersystem

Sistema di diffusori

Luidsprekersysteem

Sistema de altavoces

English

Thank you for buying this Pioneer product.

Please read through these operating instructions before using

your speaker system so you will know how to make the

most of its performance. After you have finished reading the

instructions, put them away in a safe place for future

reference.

WARNING:

Handling the power cord on this product or cords associated

with accessories sold with the product will expose you to

lead, a chemical known to the State of California and other

governmental entities to cause cancer and birth defects or

other reproductive harm.

Wash hands after handling.

CAUTION

This product is designed exclusively for use with the Pioneer

Plasma Display. For more information on compatibility, please

consult with your nearest Pioneer authorized dealer or service

center.

BEFORE USE

÷The nominal impedance of this speaker system is 8 ohms.

÷In order to prevent damage to the speaker system

resulting from input overload, please observe the

following precautions:

÷Do not supply power to the speaker system in

excess of the maximum permissable input. This can

result in damage or a possible fire hazard.

÷When connecting or disconnecting pin-plugs, be

sure that amplifier power is OFF.

÷When using a graphic equalizer to emphasize loud

sounds of a high frequency range, do not use

excessive amplifier volume.

÷Do not force a low-powered amplifier to produce a

loud volume of sound (the amplifier’s harmonic

distortion will be increased, and you may damage

the speaker).

÷Please handle the speakers with sufficient care, as

the grille net and the cabinet can become damaged

or broken when they are subjected to strong external

impacts.

÷Placing a CRT computer screen or CRT monitor near to

the speakers may result in interference or color distortion.

If this happens, distance the monitor from the speakers.

Installation

• Consult your dealer if you encounter any difficulties

with this installation.

• Pioneer is not liable for any damage resulting from

improper installation, improper use, modification, or

natural disasters.

CHECKING THE ACCESSORIES

7Speaker Cable × 2

7Speaker Mounting Fittings

Bracket ( 2), for Right and Left Sides×

Bracket for Center

7Speakers Mounting Screw

(M5 × 10 mm : Black) × 9

7Operating Instructions

CAUTION:

Attach the Plasma Display to the stand before installing

the speakers. See the Operating Instructions packed

together with the stand for how to assemble the stand.

Do not place force on the speakers front panel grille net,’

or stick your finger or other object into the front of the

speaker, since you may damage the grille net or speaker

unit itself.

Do not use these speakers with anything other than the

Plasma Display. Doing so may result in damage or fire.

English

INSTALLATION ON THE PLASMA

DISPLAY

Perform installation according to the following steps 1 to 5.

NOTE:

Before attaching the speaker, please attach the PDK-TS12

table top stand (or another Pioneer Plasma Display stand)

to the Plasma Display unit.

1Attach the speaker mounting fittings

to the rear of the Plasma Display.

Note:

It may be necessary to use a short screwdriver depending

on the stand used.

2Connect the supplied speaker cables

to the back of the Plasma Display.

See the following page (P.5) for more detailed information

on connecting speaker cables.

3Connect the other end of the speaker

cables to the speakers.

See the following page (P.5) for more detailed information

on connecting speaker cables.

4Mount the speakers onto the

speaker mounting fittings.

To avoid damaging the stand, cover it with the protective

wrapping that covered the stand.

Protective wrapping (the PDK-TS12 table top stand only)

Carefully, mount the speaker onto the mounting fittings.

This diagram depicts

the PDK-TS12 table top

stand.

1Attach the fittings for right and left sides to the Plasma

Display as shown. The diagram below depicts the right

side of the Plasma Display.

Tighten the upper screws first and then tighten the

lower screws.

2Attach the center fitting to the Plasma Display as shown.

Tighten the right side screw first and then tighten the

left side screw.

Product specificaties

Merk:	Pioneer
Categorie:	Luidspreker
Model:	pdp-s39
Kleur van het product:	Zwart
Gewicht:	2700 g
Soort:	TV/Monitor luidsprekers
Gemiddeld vermogen:	- W
Luidsprekers:	two-way
Audio-uitgangskanalen:	2.0 kanalen
Gevoeligheid:	81 dB
Snelle installatiehandleiding:	Ja
Compatibiliteit:	PDP-436XDE / FDE
Afmetingen (B x D x H):	1076 x 92 x 83 mm
Diameter hogetonenluidspreker:	2.5 mm
Aantal satellieten:	2
Impedantie satellietluidspreker:	8 Ohm
Tweeter:	Ja
Freqentiebereik satellietluidspreker:	70 - 30000 Hz
Bass-optimalisatie:	Ja