Philips S794 Handleiding

Bekijk gratis de handleiding van Philips S794 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 6 reviews. Heb je een vraag over Philips S794 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

S794

S693

,

S

7

93

Manufactured for: Philips Personal Health

a division of Philips North America LLC

P.O. Box 10313, Stamford, CT 06904, USA

This symbol on the product’s nameplate means it is

listed by Underwriters’ Laboratories, Inc.

Norelco is a registered trademark of Philips North America

LLC.

PHILIPS and Philips shield are registered trademarks of

Koninklijke Philips N.V.

©2026 Philips North America LLC. All rights reserved.

3000.161.5125.3 ( 05/02/2026 )

2

3

4

5

6

1

2

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

2yrs

23

24

25

2

4

3

1

5

6

7

1

English

IMPORTANT SAFETY INSTRUCTIONS

When using an electric product, basic precautions

should always be followed, including the following:

Read all instructions before using this product.

DANGER

To reduce the risk of electric shock:

-To charge the product, only use a USB power

source on a certied product with output

rating 5V, ≥ 1A. For safe charging in a moist

environment (e.g. in a bathroom), only use an

IPX4 (splash-proof) power source. A suitable

power source (e.g. Philips HQ87) is available via

www.philips.com/support. If you need support

nding the correct USB power source, contact

Philips support at 1-800-243-3050. Using a non-

certied USB power source may cause hazards or

serious injuries.

-This product is Qi compliant (Fig. 2). To charge the

product wirelessly, use a Qi-certied charging pad.

Carefully shake o excess water before placing the

product on the Qi charging pad. During charging,

do not place any foreign (metal) objects on the Qi

charging pad.

-Keep the USB cable and the USB power source dry

(Fig. 3).

-Do not reach for a corded product that has fallen

into water. Unplug immediately from the power

outlet.

-Do not place or store the product where it can

fall or be pulled into a tub or sink. Do not place or

drop the product into water or other liquid.

-This product is waterproof (Fig. 4). It is suitable

for use in the bath or shower and for cleaning

under the tap. For safety reasons, the product can

therefore only be used without cord.

-This product does not work while it is connected

to the power outlet. Except when charging, always

unplug this product from the power outlet.

-Remove USB power source from power outlet and

product before cleaning.

WARNING

To reduce the risk of burns, re, electric shock, or

injury to persons:

-This product is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience

and knowledge, unless they have been given

supervision or instruction concerning use of the

product by a person responsible for their safety.

Children should be supervised to ensure that they

do not play with the product.

-Use this product only for its intended household

use as described in this manual. Misuse can lead to

hazards or serious injuries. Do not use attachments

not recommended by Philips North America

LLC. Accessories supplied may vary for dierent

products.

-Never operate this product if it has a damaged

USB power source, if it is not working properly,

after it has been dropped or damaged, or

after the product or the USB power source has

been dropped into water. For assistance call

1-800-243-3050.

-Keep the USB cable and the USB power source

away from heated surfaces.

-Never drop or insert any object into any opening.

-Do not use the USB power source in or near a

power outlet that contains an electric air freshener

to prevent damage to the USB power source.

-Do not use product outdoors or operate where

aerosol (spray) products are being used or where

oxygen is being administered.

-Always check shaving heads (guards and cutters)

before using the product. Do not use the product

if cutters or guards are damaged, as injury may

occur.

-Always attach the USB cable to the USB power

source and the product rst, then attach the USB

power source to the power outlet. To disconnect,

set all controls to 'o' position. Then remove the

USB power source from the power outlet.

-Plug USB power source directly into power outlet.

Do not use an extension cord.

-Unplug USB power source before plugging in or

unplugging the product.

-Because of hygiene, only one person should use

the product.

-Clean the product after each use.

-Only use cold or lukewarm water to clean the

product.

-Never use compressed air, scouring pads, abrasive

cleaning agents or aggressive liquids such as

gasoline or acetone to clean the product.

-The batteries used in this product may present

a re or chemical burn hazard if mistreated. Do

not disassemble, heat above 100°C (212°F) or

incinerate.

-This product contains a magnet. If you have a

pacemaker or other implanted device, consult

your doctor or the manufacturer of the implanted

device before you use this product.

-Only use original Philips accessories or

consumables.

-Charge, use and store the product at a

temperature between 10 °C/50 °F°C and

95 °F / 35°C.

-Keep product and batteries away from re and

do not expose them to direct sunlight or high

temperatures.

-If the product becomes abnormally hot or smelly,

changes color or if charging takes longer than

usual, stop using and charging the product and

contact Philips.

-Do not place products and their batteries in

microwave ovens or on induction cookers.

-Do not open, modify, pierce, damage or dismantle

the product or battery to prevent batteries

from heating up or releasing toxic or hazardous

substances. Do not short-circuit, overcharge or

reverse charge batteries.

-If batteries are damaged or leaking, avoid contact

with the skin or eyes. If this occurs, immediately

rinse well with water and seek medical care.

-When you handle batteries, make sure that your

hands, the product and the batteries are dry.

-To avoid accidental short-circuiting of batteries

after removal, do not let battery terminals come

into contact with metal objects (e.g. coins,

hairpins, rings). Do not wrap batteries in aluminum

foil. Tape battery terminals or put batteries in a

plastic bag before you discard them.

SAVE THESE INSTRUCTIONS

Introduction

Congratulations on your purchase and welcome to

Philips Norelco!

To fully benet from the support that Philips

Norelco oers, register your product at

www.philips.com/register.

You can nd the model number on the back of your

product.

The full model number (e.g. XX0000/00) is located on

the bottom of the packaging, your receipt or order

conrmation.

General description (Fig. 1)

1 Protective cap

2 Shaving unit

3 Charging light

4 On/o swipe bar

5 Cleaning brush

6 USB cable

Note: A suitable power source (e.g. Philips HQ87)

is available via www.philips.com/support.

7 Travel pouch

Important to know

Always check the product and all accessories before

use. Do not use the product or any accessory if it is

damaged, as this may cause injury. Always replace a

damaged part with one of the original type.

Charge indications

Battery low

When the battery is almost empty (when there are

only 5 or fewer shaving minutes left), the charging

light ashes orange (Fig. 5).

Charging

When the shaver is charging, the charging light

ashes white (Fig. 6).

Battery fully charged

When the battery is fully charged, the charging light

lights up white continuously.

Note: After approx. 30 minutes, the charging light

goes out to save energy.

Quick charge

When you start charging the empty battery, the

charging light ashes white quickly. After approx. 5

minutes the charging light ashes white slowly. The

shaver now contains enough energy for a 5-minute

shave.

Charging

If the product is subjected to a major change

in temperature, pressure or humidity, let it

acclimatize for 30 minutes before using.

Do not charge the product in a pouch or travel

case.

Charge the shaver before you use it for the rst time

and when the charging light indicates that the battery

is almost empty.

When you charge the shaver for the rst time or after

a long period of disuse, let it charge until the charging

light indicates that the battery is fully charged.

-Charging takes approx. 1 hour.

-Quick charge: After approx. 5 minutes of charging,

the battery contains enough energy for a 5-minute

shave.

-A fully charged shaver has a shaving time of up to

60 minutes.

Note: You cannot use the product while it is charging.

Charging with a USB supply unit

Danger: Keep the USB cable and the USB power

source dry (Fig. 3).

1 Make sure that the product is switched o.

2 Insert the small plug of the USB cable into the

socket in the bottom of the product.

3 Insert the USB plug into the USB power source (not

included).

4 Insert the USB power source into the power outlet

(Fig. 7).

5 The charging light on the product will indicate the

charging status (see 'Charge indications').

6 After charging, remove the USB power source

from the power outlet and pull the small plug out

of the product.

Charging with a wireless Qi charging pad

This product supports wireless charging. When the

battery is empty, it takes approx. 2 hours to fully

charge the battery using a Qi-certied charging pad.

Note: The actual wireless charging time may dier

depending on conditions such as the technical

specications of the charging pad, the ambient

temperature, and the technical specications of the

supply unit.

Using the appliance

Switching the appliance on and o

1 To switch on the appliance, swipe upwards on the

on/o swipe bar (Fig. 8).

2 To switch o the appliance, swipe downwards on

the on/o swipe bar (Fig. 9).

Shaving

For the best results on skin comfort, pre-trim your

beard if you have not shaved for 3 days or longer.

You can use this product either wet or dry, or even

in the shower. For a wet shave, apply some water

and shaving foam or gel to your skin and rinse the

shaving heads under the tap with warm water before

following the steps below.

1 Switch on the shaver.

2 Move the shaver in circular movements over your

skin to catch hair growing in all directions (Fig. 10).

Make sure each shaving head is fully in contact

with the skin. Exert gentle pressure for a close,

comfortable shave.

Note: You can attach the protective cap onto

the bottom of the shaver for better grip during

shaving (Fig. 11).

Note: Do not press too hard, as this can cause skin

irritation.

Note: If you are shaving with gel or foam, rinse the

shaving unit regularly during your shave to ensure

that it continues to glide smoothly over your skin

(Fig. 12).

3 Switch o and clean the product after each use

(see 'Cleaning and maintenance').

4 Put the protective cap on the shaver after use

to prevent the shaving heads from becoming

damaged and dirty.

Note: Make sure you rinse all foam or shaving gel o

the appliance.

21-Day adaptation process

-21 Day Trial and Conversion Process. It is a fact that

your skin and beard need time to adjust to a new

grooming system.

-Use your new shaver exclusively for 3 weeks to

fully enjoy the closeness of a Philips Norelco shave.

-At rst you may not get as close a shave as you

expect, or your face may even become slightly

irritated. This is normal since your beard and skin

will need time to adjust. Invest 3 weeks and you'll

soon experience the full joy of your new shaver.

-Stick with it! If you alternate shaving methods

during the adjustment period, it may make it more

dicult to adapt to the Philips Norelco shaving

system.

-If you are still not convinced after 21 days, Philips

Norelco will refund you the full purchase price as

long as the request is received within 45 days of

purchase.

Cleaning and maintenance

Regular cleaning guarantees better shaving results.

Never clean, remove or replace the shaving unit

while the shaver is switched on.

Do not touch shaving heads with hard objects

as this may dent or damage the precision-made

slotted shaving heads.

Do not use abrasives, scourers or aggressive liquids

such as gasoline or acetone to clean the shaver.

Cleaning the shaver with the cleaning

brush

Clean the shaver after every shave for optimal shaving

performance.

1 Switch o the shaver.

2 Clean the surface of the shaving unit with the

cleaning brush supplied.

3 Remove the shaving unit from the shaver (Fig. 13).

4 Clean the inside of the shaving unit with the

cleaning brush.

5 Clean the hair chamber with the cleaning brush.

6 Put the shaving unit back onto the shaver (Fig. 14).

Cleaning the shaver under the tap

Caution: Always check if the water is too hot, to

prevent burning your hands.

Clean the shaver after every shave for optimal shaving

performance.

While rinsing shaving heads, water may drip out

of the base of shaver. This is a normal occurrence.

Internal electric parts are in a waterproof

compartment so the shaver will be protected against

water damage.

1 Switch on the shaver. Rinse the shaving unit with

cold or lukewarm water (Fig. 12).

2 Switch o the shaver. Remove the shaving unit

from the shaver (Fig. 13).

3 Rinse the shaving unit and hair chamber with

lukewarm water (Fig. 15).

4 Carefully shake o excess water and let the shaver

air dry (Fig. 16).

Caution: Never dry the shaving unit with a

towel or tissue, as this may damage the shaving

heads (Fig. 17).

5 Put the shaving unit back onto the shaver (Fig. 14).

Thorough cleaning

Clean the shaving heads thoroughly once a month for

optimal performance.

1 Switch o the shaver.

2 Remove the shaving unit from the shaver (Fig. 13).

3 Rinse the shaving unit and hair chamber with

lukewarm water (Fig. 15).

4 Turn the lock counterclockwise and remove the

retaining frame. Place it aside in a safe place

(Fig.18).

5 Remove and clean one shaving head at a time.

Each shaving head consists of a cutter and a guard

(Fig. 19).

Note: Do not clean more than one cutter and

guard at a time, since they are all matching sets.

If you accidentally mix up the cutters and guards,

it may take several weeks before optimal shaving

performance is restored.

6 Remove the cutter from the shaving guard and

clean both parts under the tap (Fig. 20).

7 Put the cutter back into the guard.

8 Put the shaving heads back into the shaving unit

(Fig. 21).

9 Put the retaining frame back into the shaving unit

and turn the lock clockwise (Fig. 22).

10 Put the shaving unit back onto the shaver (Fig. 14).

Note: If you cannot attach the shaving unit onto

the product easily, check if you have inserted the

shaving heads properly and if the retaining frame

is locked.

Replacement

Replacing the shaving heads

For maximum shaving performance, we advise you to

replace the shaving heads every two years (Fig.23).

Replace damaged shaving heads immediately.

Always replace the shaving heads with original Philips

shaving heads.

1 Switch o the shaver.

2 Remove the shaving unit from the shaver (Fig. 13).

3 Turn the lock counterclockwise and remove the

retaining frame. Place it aside in a safe place

(Fig.18).

4 Remove the shaving heads from the shaving unit.

Discard the used shaving heads immediately to

avoid mixing them with the new shaving heads

(Fig. 24).

5 Place new shaving heads in the shaving unit

(Fig.21).

6 Put the retaining frame back into the shaving unit

and turn the lock clockwise (Fig. 22).

7 Put the shaving unit back onto the shaver (Fig. 14).

Note: If you cannot attach the shaving unit onto

the product easily, check if you have inserted the

shaving heads properly and if the retaining frame

is locked.

This product has no other user-serviceable parts. For

assistance call 1-800-243-3050.

Storage

Put the protective cap on the product to prevent

damage.

Note: Always allow the product to dry completely

before you store it.

Storage in travel pouch

Store the shaver in the travel pouch supplied.

Note: Make sure the shaver is dry before you store it in

the travel pouch.

Accessories

Replacement parts and accessories may be

purchased at a store near you or on our website

www.philips.com/store.

The following accessories are available:

-SH71 Philips Norelco replacement shaving heads

(for S693 only)

-SH91 Philips Norelco replacement shaving heads

(for S793 and S794 only)

Assistance

For assistance, visit our

website: or call toll free www.philips.com/support

1-800-243-3050.

Disposal

-This product contains a rechargeable lithium-ion

battery which must be disposed of properly.

-Contact your local town or city ocials for battery

disposal information. You can also call 1-800-822-

8837 or visit: for battery www.call2recycle.org

drop-o locations (Fig. 25).

-For assistance, visit our website

www.philips.com/support or call

1-800-243-3050 toll free.

-Your product is designed and manufactured with

high quality materials and components, which can

be recycled and reused. For recycling information,

please contact your local waste management

facilities or visit: .www.recycle.philips.com

FCC Compliance Information

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1 This device may not cause harmful interference,

and

2 This device must accept any interference received,

including interference that may cause undesired

operation.

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

o and on, the user is encouraged to try to correct the

interference by one or more of the following

measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment

and receiver.

-Connect the equipment into an outlet on a

circuit dierent from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV

technician for help.

Full Two-Year Warranty

Philips North America LLC warrants this new product

against defects in materials or workmanship for a

period of two years from the date of purchase, and

agrees to repair or replace any defective product

without charge.

IMPORTANT: This warranty does not cover damage

resulting from accident, misuse or abuse, lack of

reasonable care, the axing of any attachment

not provided with the product or loss of parts or

subjecting the product to any but the specied

voltage.*

The shaving heads (cutters and guards) are not

covered by the terms of this warranty because they

are subject to wear and tear.

Product specificaties