Penton MSH30T/EN Handleiding

Penton Speaker MSH30T/EN

Lees hieronder de 📖 handleiding in het Nederlandse voor Penton MSH30T/EN (1 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

RoHS

Penton UK Ltd

Unit 2 Teville Industrials | Dominion Way Wort hing West Sussex BN14 8NW | | |

T: +44 (0)1903 215315 E: sales@pentonuk.co.uk | | F: +44(0)1903 215415

www.pentonuk.co.uk

1. LOUDSPEAKER

ENCLOSURE

2. REFERENCE AXIS

3. REFERENCE PLANE

4. HORIZONTAL PLANE

MUSIC HORN

LOUDSPEAKERS

f MSH30T/EN

f MSH30TENC

EN54-24

INSTALLATION INSTRUCTIONS

EN54-24:2008

Certificate No: 0359-CPD-0166 TYPE B

f MSH30T/EN

f MSH30T/ENC

* with capacitor

1. Remove the "U" bracket from the speaker. Align the bracket and mark

the fixing points. Fix the bracket using suitable fixings (Not supplied).

2. On removing the back lid of the Horn you will observe a 3 way ceramic terminal

block that is connected to the 100v line transformer via a multi core cable. To select

the required tapping select the appropriatly coloured core and terminate into the

ceramic block. Please see instructions detailed on the back of the lid to match the

colour with the tapping value which runs from 30 watts to 3.75 watts.

3. On selecting the required tapping the installation cable can be fitted via a

suitably rated gland into the single 20mm gland entry provided on the back lid.

4. Around the inner section of the chamber where the back lid was removed

a rubber gasket is located; please make sure that it is in place when re-fitting

the back lid to avoid water penetration.

5. Re-fit the speaker to the "U" bracket. Position the speaker to the desired

angle then tighten the fixings to secure in place.

6. Before connecting the speaker circuit to the power amplifier we strongly

advise that the impedance of the circuit is checked to ensure it is fault free in

order to prevent damage to the speaker and or amplification.

ZCL0504-094

JANUARY 2018

Circuit Diagram

Product specificaties

Merk:	Penton
Categorie:	Speaker
Model:	MSH30T/EN
Kleur van het product:	Wit
Gewicht:	5500 g
Breedte:	442 mm
Diepte:	288 mm
Hoogte:	260 mm
Materiaal behuizing:	Plastic, Stainless steel
Connectiviteitstechnologie:	Bedraad
Gemiddeld vermogen:	30 W
Aanbevolen gebruik:	Universeel
Impedantie:	8 Ohm
Audio-uitgangskanalen:	- kanalen
Speaker plaatsing:	Muur-montage
Aantal drivers:	1
Frequentiebereik:	70 - 16500 Hz
Luidspreker soort:	2-weg
Versterker:	Nee
AC-ingangsspanning:	100 V
Bedrijfstemperatuur (T-T):	-25 - 70 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Transformatortrappen:	7.5, 15, 30 W
Ingebouwde bijpassende transformator:	Ja