Peerless SUF661 Handleiding

Peerless Flat panel steun SUF661

Lees hieronder de 📖 handleiding in het Nederlandse voor Peerless SUF661 (29 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/29

Installation and Assembly:

Peerless Ultra-Thin Flat Mount for 37" - 65" (94 - 165 cm)*

Flat Panel Displays

Model: SUF661

*Display Compatibility Requirements

• The depth of this mount (0.19") may not provide

sufﬁ cient space for proper ventilation on some displays.

Please refer to the manufacturer's requirements for

mounting your display before installation.

• The display must have a ﬂ at mounting surface, or the

mounting holes need to be on the furthest back surface

of the display.

• Input/Output connection must be properly oriented to

accommodate mounting 0.19" from the wall.

ISSUED: 04-01-11 SHEET #: 9029-2 07-27-11

2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerlessmounts.com

Max UL Load Capacity:

150 lb (68kg)

2 of 29 ISSUED: 04-01-11 SHEET #: 203-9029-2 07-27-11

NOTE: Read entire instruction sheet before you start installation and assembly.

Table of Contents

Parts List.................................................................................................................................................................................3

Installation to Wood Stud Wall ............................................................................................................................................ 4,5

Installation to Solid Concrete/Cinder Block walls ...................................................................................................................6

Installing Display Screws ........................................................................................................................................................7

Mounting Flat Panel Display ...................................................................................................................................................8

Tools Needed for Assembly

• stud ﬁ nder ("edge to edge" stud ﬁ nder is recommended)

• drill

• 5/16" (8mm) bit for concrete and cinder block wall

• 5/32" (4mm) bit for wood stud wall

• level

• Do not begin to install your Peerless product until you have read and understood the instructions and warnings

contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US

customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact

your local distributor.

• This mount is designed to attach the display 0.19" from the wall. Please refer to manufacturer's installation guide

recommendations for required distance from wall to avoid risk of injury or property damage.

• This product should only be installed by someone of good mechanical aptitude, has experience with basic building

construction, and fully understands these instructions.

• Make sure that the supporting surface will safely support the combined load of the equipment and all attached

hardware and components.

• Never exceed the Maximum UL Load Capacity. See page one.

• If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of

an "edge to edge" stud ﬁ nder is highly recommended.

• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

• Tighten screws ﬁ rmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding

power.

• This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal

injury.

• This product was designed to be installed on the following wall construction only;

WALL CONSTRUCTION HARDWARE REQUIRED

• Wood Stud Included

• Wood Beam Included

• Solid Concrete Included

• Cinder Block Included

• Metal Stud Contact Qualiﬁ ed Professional (not evaluated by UL)

• Brick Contact Qualiﬁ ed Professional (not evaluated by UL)

• Other or unsure? Contact Qualiﬁ ed Professional (not evaluated by UL)

WARNING

3 of 29 ISSUED: 04-01-11 SHEET #: 203-9029-2 07-27-11

EFGHIJ

Before you begin, make sure all parts shown are included with your product.

Parts may appear slightly different than illustrated.

O P

Q R S

Description Qty. Part #

wall plate 1 046-P1202

Blocking arm 1 046-P1212

Cwood screws 6 500-1090

Dconcrete anchors 6 590-0320

EM5 x 12 mm hex screw 4 560-1732

FM5 x 25 mm hex screw 4 560-1733

GM6 x 12 mm hex screw 4560-1734

HM6 x 25 mm hex screw 4560-1735

I.725" washer 4 540-9478

J3/4" spacer 4 540-1059

K4 mm security driver 1 560-1133

L4 mm security allen wrench 1560-9646

MM8 x 12 mm hex screw 4560-1736

NM8 x 25 mm hex screw 4 560-1737

OM5 x 1/8" spacer 4 046-0223

PM6 x 1/8" spacer 4 046-0224

Qcloth bumper 2570-0051

Rsecurity wood screw 1 520-1092

Salligator ancho

®1590-0097

Parts List

Product specificaties

Merk:	Peerless
Categorie:	Flat panel steun
Model:	SUF661
Kleur van het product:	Zwart
Gewicht:	2050 g
Breedte:	895 mm
Hoogte:	140 mm
Gewicht verpakking:	2750 g
Breedte verpakking:	152.4 mm
Diepte verpakking:	1009.65 mm
Hoogte verpakking:	34.925 mm
Gebruikershandleiding:	Ja
Montage gereedschap:	Ja
Montagewijze:	Muur
Maximale gewichtscapaciteit:	68 kg
Certificering:	RoHS, UL
Paneelmontage-interface:	200 x 200,300 x 200,300 x 300,400 x 400,400 x 300,600 x 400,800 x 400 mm
Montage interface compatibiliteit (min):	200 x 200 mm
Montage interface compatibiliteit (max):	800 x 400 mm
Aantal displays ondersteund:	1
Maximale schermgrootte:	80 "
Code geharmoniseerd systeem (HS):	85299097
Minimale schermgrootte:	40 "
Afstand tot de muur (max.):	5 mm
Diepte (max):	5 mm