PCE Instruments PCE-PHC 10 Handleiding
PCE Instruments
Meetapparatuur
PCE-PHC 10
Bekijk gratis de handleiding van PCE Instruments PCE-PHC 10 (22 pagina’s), behorend tot de categorie Meetapparatuur. Deze gids werd als nuttig beoordeeld door 57 mensen en kreeg gemiddeld 4.6 sterren uit 29 reviews. Heb je een vraag over PCE Instruments PCE-PHC 10 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/22
pH
CONTROLLER/MONITOR
PCE-PHC 10
Your
MON
precision measurement. Although this pH controller is a
complex and delicate instrument, its durable structure
developed. Please read the following instructions carefully
and always keep this manual within easy reach.
OPERATION MANUAL
Caution Symbol
Caution :
* Risk of electric shock !
Caution :
* Do not use fingers or any tool
to touch the Wire Terminals.
* Do not apply the relay contact load
current > 0.5 Amp.
* The instrument contains no user
serviceable parts and should not
be opened by the user.
* Repair or after service should be
done by a qualified technician only.
* Power supply should apply the
correct ACV power voltage
* Cleaning - Only use the dry cloth to
clean the plastic case !
* Equipment protectted throughout
by Double Insulation or Reinforced
Insulation.
Environmental Condition
* Comply with EN61010.
Transient overvoltage at Mains Supply 2500V.
* Pollution Degree 2.
* Altitude up to 2000 meters.
* Indoor use.
* Relative humidity 80% max.
TABLE OF CONTENTS
1.
FEATURES.................................................................................................
1
2.
SPECIFICATIONS......................................................................................
2
2-1 General Specifications..........................................................................
2
2-2 Electrical Specifications........................................................................
4
3.
FRONT PANEL DESCRIPTION.................................................................
5
3-1 Display..................................................................................................
5
3-2 PV ( process value ) indicator...............................................................
5
3-3 SV ( set value ) indicator.......................................................................
5
3-4 Set Button.............................................................................................
5
3-5
▼
Button...............................................................................................
5
3-6
▲
Button...............................................................................................
5
3-7 PH/Temp Button...................................................................................
5
3-8 pH control relay indicator......................................................................
5
3-9 Temp. control relay indicator................................................................
5
3-10 pH indicator.........................................................................................
5
3-11 Temp. indicator...................................................................................
5
3-12 Wire terminals ....................................................................................
5
3-13 RS232 terminal...................................................................................
5
3-14 BNC Input socket ...............................................................................
5
3-15 Case holder .......................................................................................
5
3-16 pH Electrode plug ( optional ).............................................................
5
3-17 pH Electrode ( optional ).....................................................................
5
3-18 Temp. Probe ( optional ).....................................................................
5
3-19 Temp. Wires ( optional ).....................................................................
5
4.
MEASURING PROCEDURE......................................................................
5
4-1 Terminal connection.............................................................................
6
4-2 pH calibration .......................................................................................
6
4-3 pH measurement ( with ATC probe )....................................................
7
4-4 pH measurement ( without ATC probe )...............................................
7
4-5 1st layer setting procedures..................................................................
8
4-6 2nd layer setting procedures................................................................
10
5.
pH CALIBRATION PROCEDURES............................................................
14
6. RS232 PC SERIAL INTERFACE................................................................
17
7. pH ELECTRODE QUALITY CHECK...........................................................
19
8. SYSTEM RESET.........................................................................................
19
Product specificaties
| Merk: | PCE Instruments |
| Categorie: | Meetapparatuur |
| Model: | PCE-PHC 10 |
Heb je hulp nodig?
Als je hulp nodig hebt met PCE Instruments PCE-PHC 10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Meetapparatuur PCE Instruments
16 Juni 2025
15 Juni 2025
15 Juni 2025
25 Mei 2025
22 Mei 2025
22 Mei 2025
22 Mei 2025
14 Mei 2025
14 Mei 2025
14 Mei 2025
Handleiding Meetapparatuur
- P3 International
- ClimeMET
- Intact
- Continental Edison
- Ermenrich
- Black And Decker
- Milwaukee
- Danfoss
- Hazet
- Megasat
- BJZ
- Omnitronic
- Lund
- Arya
- Blebox
Nieuwste handleidingen voor Meetapparatuur
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
12 Juni 2025