Panduit NK5E88MBUY Handleiding
Panduit
Niet gecategoriseerd
NK5E88MBUY
Bekijk gratis de handleiding van Panduit NK5E88MBUY (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 42 mensen en kreeg gemiddeld 4.8 sterren uit 21.5 reviews. Heb je een vraag over Panduit NK5E88MBUY of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
N KET EY
NETWORK COMPONENTS
CONTRACTOR GRADE
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014 NK178C
Page 1 of 2
NetKey Keystone Style Jack Modules
Part Numbers: NK366M**Y, NK388M**Y, NK588M**Y, NK5E88M**Y, NK5E88M**Y-Q
1
2
3
4
5
6
7B
Straighten conductors and arrange in proper color sequence.
Remove 3" (76.2mm) of cable jacket and untwist pairs.
Pull conductors until outer jacket is inside cap. Bend up 90°. Cut conductors on an angle and insert into cap.
Snap cap squarely on housing until it clicks.Trim conductors flush with cap using wire snipping tool (CWST).
NOTE: Cable jacket is inside the cover.
Use Snap Tool (7A) or standard Slip Lock Pliers (7B).
Apply pressure to cap until it clicks again. Cap must be flush on
housing.
Termination Cap Removal Instructions
--- FOR USE IN KEYSTONE STYLE OUTLETS AND PATCH PANELS ONLY ---
--- OVER FOR KEYSTONE STYLE PANEL OPENING REQUIREMENTS ---
Slide screwdriver under cap to separate from housing.Push forward and down against latch at end of guide ramp until cap releases.
1
2
7A
** Denotes jack module color code.
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014 NK178C
www.panduit.com
Page 2 of 2
--- KEYSTONE STYLE PANEL OPENING REQUIREMENTS ---
PANEL OPENING REQUIREMENTS
KEYSTONE SERIES
Panel Thickness: (.048"-.058")
.58"–.59" (14.86mm)
.76"–.77" (19.43mm)
--- CATEGORY 5/5E NK588/5E88 SERIES WIRING SEQUENCES ---
WIRING DIAGRAM
Part Numbers
NK588/NK5E88
Modular Plug
Contacts
Insulation
Displacement
Contacts
“Category 5/5E” Keystone Style Jack Modules Color-Coded Wire Positions
T568A, ISDN T568B, AT&T 258A, WECO
2
1
3
5
4
6
8
7
GREEN
WHITE/GREEN
WHITE/ORANGE
WHITE/BLUE
BLUE
ORANGE
BROWN
WHITE/BROWN
R3
T3
T2
T1
R1
R2
R4
T4
2
1
3
5
4
6
8
7
ORANGE
WHITE/ORANGE
WHITE/GREEN
WHITE/BLUE
BLUE
GREEN
BROWN
WHITE/BROWN
R2
T2
T3
T1
R1
R3
R4
T4
Refer to catalog for a listing of color-coded NetKey Keystone Style Jack Modules.
--- CATEGORY 3 NK366/388 SERIES WIRING SEQUENCES ---
WIRING DIAGRAM
Part Number Part Number
NK366 NK388
EIA/TIA 568B, AT&T
258A, WECO
USOC 4-wire
in 6 pin
USOC 6-Wire
(8 Pin Jack) USOC, RJ11/RJ25
1 WHT/ORG T2
2 ORG R2
3 WHT/GRN T3
4 BLU R1
5 WHT/BLU T1
6 GRN R3
7 WHT/BRN T4
8 BRN R4
1
2 WHT/ORG T2
3 BLU R1
4 WHT/BLU T1
5 ORG R2
6
1 NC
2 WHT/GRN T3
3 WHT/ORG T2
4 BLU R1
5 WHT/BLU T1
6 ORG R2
7 GRN R3
8 NC
1 WHT/GRN T3
2 WHT/ORG T2
3 BLU R1
4 WHT/BLU T1
5 ORG R2
6 GRN R3
“Category 3” Keystone Style Jack Modules Color-Coded Wire Positions
10 Base-T EIA/TIA 568A, ISDN
USOC 4-Wire
(8 Pin Jack) RJ45, USOC 8-Wire
1 WHT/GRN T3
2 GRN/WHT R3
3 WHT/BRN T4
4 NC
5 NC
6 BRN/WHT R4
7 NC
8 NC
1 WHT/GRN T3
2 GRN R3
3 WHT/ORG T2
4 BLU R1
5 WHT/BLU T1
6 ORG R2
7 WHT/BRN T4
8 BRN R4
1 NC
2 NC
3 WHT/ORG T2
4 BLU/WHT R1
5 WHT/BLU T1
6 ORG.WHT R2
7 NC
8 NC
1 BRN R4
2 WHT/GRN T3
3 WHT/ORG T2
4 BLU R1
5 WHT/BLU T1
6 ORG R2
7 GRN R3
8 WHT/BRN T4
Refer to catalog for a listing of color-coded NetKey
Keystone Style Jack Modules.
1 8
Pin #’s
Notes:
1. For specified performance, follow TIA/EIA 568A installation guidelines and use equivalent or higher category twisted pair cable.
2. Keystone Style Jack Modules can terminate PVC or Plenum rated 22-24 AWG solid or stranded IWC cable with 0.048 inch (1.2mm)
maximum insulated conductor outside diameter.
3. Keystone Style Jack Modules may be reterminated a minimum of 10 times.
4. For technical and performance data, refer to catalog or consult Panduit Technical Support.
As with all Wiring Accessories, the following statements apply:
1. Never install communications wiring during a lightning storm.
2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations.
3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface.
4. Use caution when installing or modifying communication wiring.
Product specificaties
| Merk: | Panduit |
| Categorie: | Niet gecategoriseerd |
| Model: | NK5E88MBUY |
Heb je hulp nodig?
Als je hulp nodig hebt met Panduit NK5E88MBUY stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Panduit
13 Mei 2025
13 Mei 2025
13 Mei 2025
13 Mei 2025
9 Mei 2025
4 Mei 2025
27 April 2025
11 April 2025
14 December 2024
14 December 2024
Handleiding Niet gecategoriseerd
- DIO
- Crunch
- Whirlpool
- Dutchbone
- Robern
- Rigol
- TC Helicon
- Microair
- LYYT
- Butler
- Stadler Form
- XS Power
- Maytag
- Eureka
- Edsyn
Nieuwste handleidingen voor Niet gecategoriseerd
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025