Panasonic RP-SDW64GE1K Handleiding

Panasonic Niet gecategoriseerd RP-SDW64GE1K

Lees hieronder de 📖 handleiding in het Nederlandse voor Panasonic RP-SDW64GE1K (34 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/34

Interface: Standard SDXC memory card

interface

Clock frequency: up to 50 MHz

Operating voltage: 2.7 V to 3.6 V

Dimensions (Wt t k kH D): 24.0 mm 32.0 mm 2.1 mm

Mass: 2 g

Operating temperature:

j o i o25 C to 85 C

≥Specifications are subject to change without notice.

≥Mass and dimensions are approximate.

Интepф йe c: Интepф й к пe c apты aмяти SDXC

c a aт ндapт

Т в я ч т тaктo a ac o a: дo 50 МГц

Paб чo ee e:н пa pяжeни o т 2,7 В дo 3,6 В

Paзмepы (Ш В Гt t ): 24,0 32,0 2,1 ммkммkмм

Мacca: 2 г

Рабочая температура:

o Cтj25 oC до i85 o

≥Т и м г т н б зexничecки ктe xapa ep cтики o y быть измe eны e

y e o e .в д мл ния

≥М и ы д пacca paзмep aны pиблизитeльнo.

Operating Instructions

Bedienungsanleitung

Mode d’emploi

Istruzioni per l’uso

Bruksanvisning

Manual de Instruções

Gebruiksaanwijzing

Használati utasítás

Instrucciones de funcionamiento

Návod k obsluze

Betjeningsvejledning

Instrukcja obsługi

Kullanım Kılavuzu

Инструкция по эксплуатации

SDXC Memory Card

Model No. RP-SDW64GE1K/

RP-SDW48GE1K

Supplied accessory: USB Reader/Writer (1)

SDXC(SDHC, SD) memory card case (1)

Specifications Texничecкиe xapaктepиcтики

Your attention is drawn to the fact that recording pre-recorded tapes or discs or other published or broadcast material may

infringe copyright laws.

Keep out of reach of children

Danger of swallowing.

If swallowed, seek medical advice immediately.

Do not disassemble or modify

Doing so may result in fire or electrification, or damage the

equipment being used.

Stop using when any malfunction occurs

(Whenever any smoke, odd odor, unusual noise is detected;

when liquid or foreign objects got inside; or after being

dropped or damaged)

Using it in such a condition may result in fire.

This SDXC memory card can only be used with SDXC

compatible equipment. Before using this card, please confirm

that your equipment is compatible with SDXC memory cards.

Check with SDXC logo mark, the operating instructions of the

equipment, or information supplied by the manufacturer.

≥Note that it may cause a problem with the compatibility of the

card or data may be lost when used on equipment not

compatible with SDXC memory cards.

When the SDXC memory card is inserted into

equipment not compatible with SDXC memory cards

≥A message saying that “This card is malfunctioning”, “This card

cannot be used”, etc., may display.

≥A message saying “This card needs to be formatted”, etc., or a

format screen may display.

> It will cause a problem with compatibility if it is formatted, so

do not format.

≥The power may not go on.

Use this card on a PC by connecting the included USB reader/

writer.

For details about the USB reader/writer, read “User Guide for

USB Reader/Writer”.

≥You can use it as it is with Windows 7.

≥Update to SP1 or later is required for Windows Vista.

≥Update to SP2 or later is required for Windows XP. Apply

update program (KB955704) after updating to SP2 or later. For

details, see the following Web Site:

http://support.microsoft.com/?kbid=955704

≥It cannot be used with Windows 2000, Windows Me, or

Windows 98.

≥It cannot be used with the Mac OS. (As of February 2010)

User Guide for USB Reader/Writer

To avoid lost data or corrupted SDXC memory card, please

refrain from removing the reader/writer from an USB port or

shutting down the PC while reading or writing.

No driver is required.

1. Boot up a computer.

2. Remove the cap and plug the reader/writer into the USB port.

3. Insert a SDXC memory card, with its label facing the top side

of the reader/writer, into the slot of the reader/writer.

4. An icon of the reader/writer will appear in “My Computer”.

5. Proceed to operation. Upon completion and after LED stops

flashing, remove the SDXC memory card, and unplug & recap

the reader/writer accordingly.

Writing to the card may become impossible when abnormal

operations occur, such as removing the card or turning off the

power while data from the PC is being written to the card. In such

a case, writing becomes possible again by performing the

following operation.

1Right-click the icon representing the drive with this card in

“My Computer”.

2Click “Properties”.

3Select the “Tools” tab, and click “Check” in “Error check”.

4Place a check mark on “Correct file system error automati-

cally”, and click “Start”.

To use the SDXC memory card by directly inserting into the SD

card slot on your computer, be sure to check the information

provided by the manufacturer of your PC.

ENGLISH

WARNING

READ THIS FIRST

You may be prompted to format the card when it is used with

equipment not compatible with the SDXC memory card (such

as a PC). Doing so will result in loss of data, so be sure to

cancel.

About this SDXC memory card

How to check SDXC compatible equipment

To use on a PC

Opening and closing the case

Hold the case with both hands when opening and closing it to

prevent damage to the card.

Removing and storing the card

Slide the card on the tray when removing and storing it. Ensure

the card is correctly placed on the tray before closing the case.

You can write notes directly onto this card with a

pen, etc.

≥Do not use excessive force as it may damage

the card. Take care not to stain the metal

terminals.

≥Use a pencil or similar to write on the reverse

side of the card, and not writing instruments with

a hard tip, such as a ballpoint pen.

≥Switch the write-protect switch a to

“LOCK”. Unlock when you want to record or

edit the card again.

≥While data is being read or written, do not

remove the card or turn off any equipment

using the card. Do not remove the batteries

from battery-operated equipment. These

actions can cause data to be destroyed.

≥Make backup copies of your data wherever possible.

Panasonic will not accept responsibility for any data loss, or

loss directly or indirectly caused by data loss.

≥When a reformatting is required, format with compatible

equipment or use the dedicated formatting software. You may

have a problem with the compatibility or performance when it is

formatted with the formatting software that is included in your

PC. For the dedicated formatting software, see the Panasonic

Web Site.

http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html

≥Do not disassemble or modify the card.

≥Do not impact, bend, drop, or wet.

≥Do not touch the metal terminals with your hands or metal

objects.

≥Do not detach the label on the card.

≥Do not attach other labels or stickers.

≥Do not use or store this card in a location subjected to static

electricity or electrical noise. If the host device does not operate

normally due to the effects of static electricity on the card, then

remove the card from the host device and insert it again.

≥After using the card, store it in a commercially available card

case with anti-static electricity treatment, or similar.

≥Do not place it inside a car that may become very hot, or places

that will get very hot, such as under direct sunlight.

≥Do not use or store in humid or dusty locations.

≥Do not use or store in locations exposed to corrosive gases.

“ ” represents Class 10 of the speed specification

regarding continuous writing between SDXC compatible

equipment and SDXC memory cards (SD Speed Class),

specified by the SD Standards. If the SDXC compatible

equipment is compatible with the SD Speed Class, and

recommends the Class 10 card, you will have stable recording

operation using this card.

≥SDXC compatible equipment may contain the functions

“Format” and “Erase”. However, in most cases all data on the

card will not be completely erased even after performing these

functions. When disposing or transferring ownership of the

card, we recommend using Panasonic formatting software

(http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html)

to completely erase all data from the card.

≥When you dispose of the SDXC memory card, destroy it

physically or erase all data completely and follow your local

rules of separation and disposal of waste.

Removal and storage of the SDXC memory

card

About writing on this card

Protecting your data

Handling and storage precautions

LOCK



About “ ” (SD Speed Class, Class 10)

Cautions about disposal or transferring

ownership of this card

≥SDXC Logo is a trademark of SD-3C, LLC.

≥Microsoft®, Windows®, Windows® 98, Windows® Me,

Windows® 2000, Windows® XP, Windows Vista® and

Windows® 7 are either registered trademarks or trademarks

of the Microsoft Corporation in the United States and/or

other countries.

≥Apple, Mac OS is either registered trademarks or

trademarks of Apple Inc. in the United States and/or other

countries.

≥Other names of systems and products mentioned in these

instructions are usually the registered trademarks or

trademarks of the manufacturers who developed the system

or product concerned.

Product specificaties

Merk:	Panasonic
Categorie:	Niet gecategoriseerd
Model:	RP-SDW64GE1K
Breedte:	180 mm
Diepte:	188 mm
Hoogte:	11.43 mm
Capaciteit:	64 GB
Leessnelheid:	22 MB/s
Schrijfsnelheid:	22 MB/s
Soort flashgeheugen:	SDHC