PAC APSUB-TY13 Handleiding

Bekijk gratis de handleiding van PAC APSUB-TY13 (6 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.8 sterren uit 8 reviews. Heb je een vraag over PAC APSUB-TY13 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

© 2021 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.

PAC-audio.com

C

Page 1

Rev: 2

Date: 052721

®

Advanced Subwoofer Amplier Interface

for Select Toyota and Lexus Applications

APSUB-TY13

The APSUB-TY13 provides a 2-channel non-fading output for use with an aftermarket amplier and subwoofer. Using the

full range, xed level head unit output, in conjunction data bus messages, the APSUB-TY13 delivers a variable 5v RMS

pre-amp output with bass equalization and level control capabilities. The signal has a 350Hz / 24dB Linkwitz-Riley low

pass lter applied. A data controlled remote amplier turn on wire is also provided by the APSUB-TY13.

Introduction and Features

Important Notes

1. Only compatible in vehicles equipped with a data bus controlled premium sound system. To verify compatibility in Toyota,

look for a JBL logo on the radio. In Lexus, compatible applications will have a center channel or factory subwoofer.

2. Toyota Safety Connect / Lexus Enform (SOS) audio mute can be retained. See the page 3 for detailed instructions.

3. The factory radio's speed controlled volume, DSP, and surround sound mode are not supported by the APSUB outputs.

4.Thefactoryampliermustremainconnected,andinthevehicleaftertheAPSUBhasbeeninstalled.

5. The radio's minimum volume level is set to 0 dB by default. If you are happy with this level in your particular application,

additionaladjustmentisnotrequired.PleaserefertotheSetupandCongurationsectiononpage3formoredetails.

6. The remote output is rated at 2A of current. If more current is needed, an external relay must be used.

7. The subwoofer channels are non-fading outputs. The output level of subwoofer channels can be controlled using the

supplied level control knob.

Wiring Connection Chart

To Aftermarket

Amplier

Subwoofer Outputs

Non-Fading

Level Control

Knob

Remote Turn On Output (2A Max)

SOS Mute ( - Trigger Input )

GRAY

GRAY

BLACK

BLACK

28-pin

10-pin

Product specificaties