PAC AAI-TY3 Handleiding
PAC
Niet gecategoriseerd
AAI-TY3
Bekijk gratis de handleiding van PAC AAI-TY3 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.8 sterren uit 2 reviews. Heb je een vraag over PAC AAI-TY3 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
1
AAI-TY3
Before You Start
Installation Instructions
2003-2012 Lexus / Scion / Toyota Auxiliary Input Adapter
Before any connections are made, PAC strongly recommends that all circuits be verified with a voltmeter before interfacing with them.
Always set the parking brake before working on any vehicle.
Vehicle Applications
LEXUS
ES330 2004-2006
ES350 2006-2010
GS300 2006
GS350 2007-2009
GS450h 2007-2009
GS460 2008
GX470 2005-2009
IS250 2006-2010
IS350 2006-2010
ISF 2008-2010
SCION
xA 2004-2006
xB 2004-2010
xD 2008-2011
tC 2004-2010
Installation Instructions
1. Disconnect the negative battery terminal.
2. Remove the Toyota radio to gain access to the radio’s 12-pin data port.
3. Remove the harness that may be plugged into this port.
4. Connect the MALE end of the AAI-TY3 vehicle harness to the radio’s 12-pin DATA port.
5. Connect the FEMALE end of the AAI-TY3 vehicle harness to any harness that was previously plugged into this port.
6. Open the AAI-TY3 case DIP switch window cover and configure the internal DIP switches for your specific application (see diagrams on back).
7. Once the AAI-TY3 module’s DIP switches have been configured and the DIP switch window cover closed, connect the male 10-pin Molex
connector of the AAI-TY3 vehicle harness to the module.
8. Connect an appropriate length patch cord or other cable (not included) between the AAI-TY3 and auxiliary device.
9. Re-install factory radio.
10. Reconnect the negative battery terminal.
Install It Right with AAI-TY3
DO NOT force connectors together as pin damage may occur. This installation will be flawless if you take your time making the connections
described below. Following the installation sequence below is critical to ensure proper recognition of the auxiliary device by the factory radio.
General Overview
The AAI-TY3 converts the 12-pin satellite or CD changer port of the OEM Lexus / Scion / Toyota radio to RCA level audio input. The AAI-TY3
can be configured (with internal DIP switch settings) to work in either satellite or CD changer mode, depending on what the radio’s
capabilities are, and what options the vehicle is equipped with. The AAI-TY3 will replace the OEM device that you choose to emulate. If
the radio has built-in SAT, the AAI-TY3 must use the CD emulation mode.
Verify Operations
1. With radio on, activate auxiliary device.
2. Set volume on auxiliary device to preferred listening level.
3. Push the appropriate (i.e. CD, DISC or AM/SAT, etc.) button on radio to access AUX or SAT mode.
4. Display on radio will show “CD1 TR 1” (CD emulation) or channel “001” (SAT emulation).
5. Verify that audio of auxiliary device is heard.
Copyright 2013 Pacific Accessory Corporation. Content subject to change without notice.
4-Runner 2003-2011
Avalon 2003-2010
Camry 2005-2011
Camry Solara 2003-2009
Celica 2003-2005
Corolla 2005-2010
FJ Cruiser 2007-2011
Highlander 2004-2012
Land Cruiser 2003-2011
Matrix 2006-2010
MR2 2003-2005
Prius 2006-2011
RAV4 2006-2011
Sequoia 2003-2011
Sienna 2004-2010
Tacoma 2005-2012
Tundra 2003-2012
Venza 2009-2011
Yaris 2007-2011
TOYOTA
NOTE: Not compatible with radio models AD6809 or AD6810.
2
Santa Ana, CA 92705
techsupport@pac-audio.com • www.pac-audio.com
Installation Diagram
Plug in Auxiliary
Device into
RCA Connectors
12-pin CD Changer
Data Connector
Factory Satellite
Tuner
(if present)
SET DIP SWITCHES TO:
1 2 3 4
Use “CD”, “AUX” or
“DISC” button to
access AUX Mode
Factory Data Cable
Plug in Auxiliary
Device into
RCA Connectors
Factory DVD/CD
Changer (if present)
SET DIP SWITCHES TO:
1 2 3 4
Use “SAT” or “AM-SAT”
button to access
AUX Mode
Factory Data Cable
Factory Radio
(rear view)
Plug in Auxiliary
Device into
RCA Connectors
Factory Data
Cable
CD EMULATION MODE
SAT EMULATION MODE
CONNECTION AT XM TUNER / CD CHANGER LOCATION
12-Pin CD Changer
Data Connector
Factory Satellite
Tuner
(if present)
12345-13 2
12345-13 2
Factory Radio
(rear view)
12-pin CD Changer
Data Connector
DIP switch window cover
DIP switch window cover
DIP switch window cover
Product specificaties
| Merk: | PAC |
| Categorie: | Niet gecategoriseerd |
| Model: | AAI-TY3 |
Heb je hulp nodig?
Als je hulp nodig hebt met PAC AAI-TY3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd PAC
2 Mei 2025
10 Maart 2025
19 Februari 2025
19 Februari 2025
19 Februari 2025
19 Februari 2025
19 Februari 2025
19 Februari 2025
19 Februari 2025
11 Februari 2025
Handleiding Niet gecategoriseerd
- Thames & Kosmos
- Beaphar
- Belgacom
- Blackburn
- Neumann
- Schaffner
- We-Vibe
- Power Dynamics
- REL Acoustics
- Diamond Audio
- Posiflex
- Serge
- MoTip
- Durvet
- UX
Nieuwste handleidingen voor Niet gecategoriseerd
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025