Ozito ZLRWS-040 Handleiding

Ozito Niet gecategoriseerd ZLRWS-040

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito ZLRWS-040 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
10mm 11mm 12mm 13mm 14mm 15mm 17mm14mm
RATCHET
WRENCH
12V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Input Voltage: 12V
No Load Speed: 0-230/min
Max. Torque: 35Nm
Drive Shaft: 3/8” (9.5mm) Square
Tool Weight: 1.25kg
ZLRWS-040
STANDARD EQUIPMENT
Cordless
Ratchet Wrench
8 x CRV Sockets &
3/8”Female to ¼”
Male Adaptor
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries and chargers
are covered by a 12 month warranty. Warranty excludes
consumable parts, for example: accessories, carbon brushes etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
1220
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
10mm 11mm 12mm 13mm 14mm 15mm 17mm
14mm
Attaching Sockets
1. To attach a socket, align the 3/8”
socket with the drive shaft and push it
rmly into tool.
2. To use 1/4” sockets on the ratchet
wrench, push the supplied adaptor
onto the drive shaft. Then attach
the desired 1/4” socket (not
supplied) to the other end of the
adaptor.
3. To remove the socket, pull the
accessory away from the drive shaft.
Note: Ensure sockets and accessories
are attached properly before use.
1. Forward/Reverse Dial
2. Handle
3. Battery Seating
4. Variable Speed Trigger
5. Trigger Lock
6. Drive Shaft
7. 3/8” 10 x 28mm Socket
8. 3/8” 11 x 28mm Socket
9. 3/8” 12 x 28mm Socket
10. 3/8” 13 x 28mm Socket
11. 3/8” 14 x 28mm Socket
12. 3/8” 14 x 63mm Socket
13. 3/8” 15 x 28mm Socket
14. 3/8” 17 x 30mm Socket
15. 3/8”F to ¼”M 25mm Adaptor
CORDLESS RATCHET WRENCH
KNOW YOUR PRODUCT
ACCESSORIES
BATTERY & CHARGER
This tool is compatible with all batteries and chargers from the
Ozito Home-12volt range.
1 2
34
7 8 9 10 12 13 14 1511
6 5
WARNING! ENSURE THE TOOL IS SWITCHED OFF
AND THE BATTERY IS DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
1. ASSEMBLY
SETUP & PREPARATION
11mm
11mm
Inserting and Removing The Battery
1. Align the ribs of the battery
with the recess in the battery
seating and push it until it
clicks into place.
2. To remove, press and hold
the battery release tab and
then slide out.
Trigger Lock
To lock the variable speed
trigger, slide the trigger lock to
the locked position.
To unlock the variable speed
trigger, slide the trigger lock to
the unlocked position.
Note: Always lock the variable speed trigger when tool is under
maintenance, changing accessories, storing tool or any time tool is
not in use.
Variable Speed Trigger
1. Slide the trigger lock towards
the front of the tool to unlock
the variable speed trigger.
2. Squeeze the variable speed
trigger to start the tool. Control
the speed by adjusting the
amount of pressure applied to
the trigger.
3. Release the variable speed
trigger to stop the wrench.
4. Slide the trigger lock towards
the back of the tool when
done to prevent accidental
starting.
2. BATTERY FITMENT 3. CONTROLS
OPERATION
a.
b.
a.
b.

Product specificaties

Merk: Ozito
Categorie: Niet gecategoriseerd
Model: ZLRWS-040

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito ZLRWS-040 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Ozito

Ozito

Ozito PXPPS-1820 Handleiding

8 April 2024
Ozito

Ozito PXNGS-218 Handleiding

8 April 2024
Ozito

Ozito PXHTBK-2518 Handleiding

8 April 2024
Ozito

Ozito PSR-5732U Handleiding

16 Maart 2024
Ozito

Ozito PXCLMLTC-418U Handleiding

16 Maart 2024
Ozito

Ozito PXWBS-200U Handleiding

16 Maart 2024
Ozito

Ozito PXDDK-301U Handleiding

16 Maart 2024
Ozito

Ozito PXCPPS-018U Handleiding

16 Maart 2024
Ozito

Ozito WPHGK-2000U Handleiding

16 Maart 2024
Ozito

Ozito PXDDGK-600U Handleiding

16 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024