Ozito ZLRTS-012 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito ZLRTS-012 (8 pagina's) in de categorie Multitool. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
ROTARY
TOOL
12V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Input Voltage: 12V
No Load Speed: 10,000 - 22,000/min
Collet Chuck Size: ø 2.3 / 3.2mm
Flexible Shaft Length: 1.0m
Tool Weight: 0.45kg
ZLRTS-012
STANDARD EQUIPMENT
Cordless Rotary Tool
Flexible Shaft
Accessories x 84
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries and chargers
are covered by a 12 month warranty. Warranty excludes
consumable parts, for example: accessories, carbon brushes etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0620
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Collet Nut
2 Shaft Collar
3 Spindle Lock Button
4 On/OButton
5 Variable Speed Controls
6 Battery Seating
CORDLESS ROTARY TOOL
KNOW YOUR PRODUCT
1. CHANGING ACCESSORIES
7 Flexible Shaft
8 Locking Collet
9 Spindle Lock
10 Fitting Collar
11 Rotary Accessories x 81
12 Spanner
ACCESSORIES
BATTERY & CHARGER
SETUP & PREPARATION
1 2 3 4 5 6
7 8 9 10 1211
WARNING! ENSURE THE TOOL IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE PERFORMING ANY
OF THE FOLLOWING OPERATIONS.
1 Press and hold the spindle
lock button.
2 Unscrew the collet nut and
remove completely.
3 Insert the collet into the
spindle and then cover
with the collet nut.
4 Lightly tighten the collet nut so
that it stays in place.
5 Insert shaft of accessory
into the collet.
Note: The supplied collet will
t3.2mmbitswhen
fully open. When fully
tightened it can reduce
to hold 2.3mm bits.
6 Tighten collet nut using spindle
lock and spanner.
This tool is compatible with all batteries and chargers from the
Ozito Home-12volt range.
2. CHANGING ACCESSORIES CONT. 3. FLEXIBLE SHAFT
Locating a cutting/sanding disc
Locating a sanding drum
2 Fitthebreangeeitherside
of the cutting disc, then insert
the screw.
1 Loosen the screw on the top
of the sanding drum holder.
3 Tighten the cutting disc onto
the cutting disc holder.
2 Slide the sanding drum onto
the sanding drum holder.
1 Remove the screw from
the end of the disc holder.
Note: Do not over-tighten the screw as it could result in damage to the
cutting disc.
3 Tighten the screw until
the sanding drum sleeve
is secured.
1 Remove the shaft collar.
6 Insert the spindle lock key into
the hole on the handle.
2 Loosen the collet nut.
7 Loosen collet nut then insert
shank of accessory into collet.
3 Raise the handle end of
theexibleshaft&shake
gently until the inner
exibleshaftprotrudes
fromthettingcollaror
use a pair of pliers.
5 Screwtheexibleshaft
ttingcollarontothe
rotary tool.
8 Tightencolletnutandcheckallttingstoensuretheyaresecurely
fastened.
4 Inserttheinnerexibleshaftintothecolletthentightenthecollet
nut.
a
b
ab
Product specificaties
| Merk: | Ozito |
| Categorie: | Multitool |
| Model: | ZLRTS-012 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito ZLRTS-012 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Multitool Ozito
14 Juni 2023
9 Juni 2023
6 Juni 2023
15 Mei 2023
3 Mei 2023
3 Mei 2023
21 April 2023
14 April 2023
2 Februari 2023
17 Januari 2023
Handleiding Multitool
- Multitool Bosch
- Multitool AEG
- Multitool DeWalt
- Multitool Bavaria
- Multitool Dremel
- Multitool Einhell
- Multitool Extech
- Multitool Fein
- Multitool Ferm
- Multitool Festool
- Multitool Gamma
- Multitool Gude
- Multitool Hama
- Multitool Hikoki
- Multitool Kress
- Multitool Makita
- Multitool Metabo
- Multitool Milwaukee
- Multitool Parkside
- Multitool Powerfix
- Multitool Powerplus
- Multitool Renovator
- Multitool Robust
- Multitool Rocktrail
- Multitool Ryobi
- Multitool Silvercrest
- Multitool Silverline
- Multitool Skil
- Multitool Stiga
- Multitool Taurus
- Multitool Toolcraft
- Multitool Topcraft
- Multitool Trotec
- Multitool Varo
- Multitool Vonroc
- Multitool Westfalia
- Multitool Worx
- Multitool Black And Decker
- Multitool Cocraft
- Multitool Meec Tools
- Multitool Cotech
- Multitool Fieldmann
- Multitool Lezyne
- Multitool Proxxon
- Multitool Porter-Cable
- Multitool EGO
- Multitool Leatherman
- Multitool Dedra
- Multitool Graphite
- Multitool RIDGID
- Multitool Craftsman
- Multitool G-Technology
- Multitool SKS
- Multitool Baumr-AG
- Multitool MTM
- Multitool Meister Craft
- Multitool McKenzie
- Multitool Ergotools Pattfield
- Multitool CMT Orange Tools
- Multitool Donau Elektronik
Nieuwste handleidingen voor Multitool
17 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
8 April 2024
19 Maart 2024
16 Maart 2024