Ozito PXTCS-018 Handleiding

Bekijk gratis de handleiding van Ozito PXTCS-018 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 4.0 sterren uit 4 reviews. Heb je een vraag over Ozito PXTCS-018 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

STANDARD EQUIPMENT

PXTCS-018

INSTRUCTION MANUAL

SPECIFICATIONS

Input: 18V

No load speed: 3,800/min

Cutting depth 90°: 24mm

Cutting depth 45°: 16mm

Cutting table: 305mm x 335mm

Turbo diamond cutting wheel: ø115 x ø22.2mm

Weight: 3.5kg

ozito.com.au

1224

TILE CUTTER SAFETY WARNINGS

WARNING! This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for their

safety

• Make sure that the cutting turbo diamond cutting wheel is correctly screened by the guard.

• Never remove the safety guard splitter.

• Do not use cutting turbo diamond cutting wheel which is bent, deformed or otherwise damaged.

• Do not use cutting turbo diamond cutting wheels which do not comply with the specifications stated

in this manual.

• Never start cutting tiles before the machine reaches full speed.

• Never attempt to cut extremely small workpieces.

• Do not leave the work area until the machine has been switched off and the cutting disc has come

to a complete standstill.

• Never attempt to stop the cutting turbo diamond cutting wheel by exerting pressure on the side of

the turbo diamond cutting wheel.

• Always remove battery before performing any maintenance.

• Do not use the machine before it has been completely assembled and installed according the

instructions.

• Do not perform any design, assembly or construction activities on the table while the machine is

switched on.

• Remove battery from the machine and clean the table before leaving the work area.

• Take care that the selection of the diamond discs is suitable for the material to be cut.

• Faults in the machine, including guards or diamond discs, should be reported as soon as they are

discovered. Never use the machine without the guard in position.

• Maximum size of working piece should not be over table size.

• This tile cutter should be used with limitations on ambient conditions (between 15°C and 30°C).

• Sharp edges and splinters of ceramic tiles can easily cause cuts. Wear work gloves for handling and

while cutting tiles.

• Keep hands away from cutting area and turbo diamond cutting wheel.

• Keep your body positioned to either side of the turbo diamond cutting wheel, but not in line with the

turbo diamond cutting wheel. Kickback could cause the tool to jump backwards.

• Do not reach underneath the workpiece. The guard cannot protect you from the turbo diamond

cutting wheel below the workpiece.

• Do not attempt to remove cut material when the turbo diamond cutting wheel is rotating. Note that

the turbo diamond cutting wheel will continue to coast for a while after the motor is switched off.

• Never wet cut with turbo diamond cutting wheels designed for dry cutting. There is danger of turbo

diamond cutting wheel fracture and serious personal injury.

• Diamond turbo diamond cutting wheels do not cut material, rather they grind material to perform

a cutting action. Do not feed the turbo diamond cutting wheel into the tile faster than the turbo

diamond cutting wheel can grind.

• Never grind a tile using the side of the turbo diamond cutting wheel, or try to make radius or curve

cuts. This will damage the turbo diamond cutting wheel and could cause turbo diamond cutting

wheel fracture.

• Wear suitable personal protective equipment when necessary, this could include hearing protection

to reduce the risk of induced hearing loss, respiratory protection to reduce the risk of inhalation of

harmful dust, wear gloves when handling diamond discs and rough material.

• Avoid using power tools for long periods of time without breaks. Vibration from tools can be

transmitted into your hands and arms.

Cordless Tile Cutter

Mitre Stop, Ring Spanner,

Parallel Stop, Wheel Guard

Turbo Diamond Cutting Wheel,

Splitter, Fastening knob for

wheel guard, Fastening bolt

for wheel guard

DESCRIPTION OF SYMBOLS

Wear hand protection

Wear hearing protection

Wear eye protection

Warning

Caution, Risk of Cutting

Use only continuous rim diamond

cutting-off wheels.

Abrasive product only

suitable for wet cutting.

Regulatory Compliance Mark

(RCM)

V

Volts

mm

Ø

Millimetres

n

0

/min

Direct Current

Diameter

No load speed

Revolutions per minute

Read Instruction Manual

Power tools that are no longer usable should not be disposed of with

household waste but in an environmentally friendly way. Please recycle

where facilities exist. Check with your local council authority for

recycling advice.

Recycling packaging reduces the need for landll and raw materials.

Reuse of recycled material decreases pollution in the environment.

Please recycle packaging where facilities exist. Check with your local

council authority for recycling advice.

CARING FOR THE ENVIRONMENT

SPARE PARTS

Spare parts can be ordered from the Special Orders Desk at

your local Bunnings Warehouse.

For further information, or any parts not listed here, visit

www.ozito.com.au or contact Ozito Customer Service:

Australia 1800 069 486

New Zealand 0508 069 486

E-mail: [email protected]

TILE

CUTTER

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

OZITO 25 Fox Drive, Dandenong South, VIC 3175, Australia.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other than that specied

on the tool.

• If the tool shows signs of damage or defects caused by or resulting from

abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty and are excluded from the warranty extension. Warranty excludes

consumable parts.

WARNING! BEFORE CLEANING OR CARRYING OUT

ANY MAINTENANCE PROCEDURE, ENSURE THAT

THE BATTERIES HAVE BEEN REMOVED.

Cleaning

• Keep the ventilation slots of the tool clean at all times to ensure efcient

operation.

• After each use, blow air through the tool housing to ensure it is free from

all dust, dirt, etc. Build up of dust or dirt particles may cause the tool to

overheat and shorten the life of the tool.

• If the housing of the tool requires cleaning, do not use solvents. Use of a

cloth only is recommended.

• Never allow any liquid to get inside the tool, never immerse any part of

the tool into liquid.

Storage

Khen not in use, the tool should be stored in a dry, frost free location, keep

out of children’s reach.

Note: Ozito Industries will not be responsible for any damage or injuries

caused by repair of the tool by an unauthorised person or by mishandling.

GENERAL POWER TOOL SAFETY WARNINGS

ELECTRICAL SAFETY

WARNING! When using electric tools basic safety precautions should always be followed

to reduce the risk of fire, electric shock and personal injury.

• Read the whole manual carefully and make sure you know how to switch the tool off in an

emergency, before operating the tool. Save these instructions and other documents supplied

with this tool for future reference.

• This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for

their safety. Children should be supervised to ensure that they do not play with the appliance.

• This appliance is compatible and only to be used with all batteries & chargers from the Ozito

PXC range. Refer to the PXC battery and charger manuals for information regarding charging

use and storage.

• WARNING! Always remove the battery from the tool:

- when the batteries are to be charged,

- when the tool is left unattended,

- when the tool is being checked, cleaned, or having maintenance work done,

- when the tool is to be stored,

- or if the tool vibrates abnormally.

• Do not combine different types of batteries or new and used batteries.

• Do not use modified or damaged batteries.

MAINTENANCE

Changing the Turbo diamond cutting wheel

1. Remove the Water Reservoir cover.

2. Remove the screw from the turbo diamond

cutting wheel safety guard and lift turbo

diamond cutting wheel safety guard out of

its notch..

3. Remove the cover.

4. Stop the spindle from rotating with

one spanner while unscrewing the

turbo diamond cutting wheel nut

with the other in an anti-clockwise

direction.

5. Remove the turbo diamond cutting wheel

nut, outer ange and the old turbo diamond

cutting wheel from the spindle.

6. Place the new turbo diamond cutting

wheel on the spindle, so that it sits

centrally aligned on the inner ange.

Place the outer ange on the spindle.

7. Place the turbo diamond cutting

wheel nut, stop the spindle from

rotating with one spanner while

tightening the turbo diamond cutting

wheel nut with the other in a

clockwise direction.

8. Slide the turbo diamond cutting wheel

safety guard back into its original

position.

9. Fasten it in place with screw, and fasten

the water reservoir cover in place.

WARNING!Read all safety warnings, instructions, illustrations and specifications provided with

this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/

or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power tool. Distractions can cause you

to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase

the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use

of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a power tool.

Do not use a power tool while you are tired or under the influence of drugs, alcohol or

medication. A moment of inattention while operating power tools may result in serious personal

injury.

b) Use personal protective equipment. Always wear eye protection. Protective equipment such

as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate

conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to

power source and/or battery pack, picking up or carrying the tool. Carrying power tools with

your finger on the switch or energising power tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables better control of

the power tool in unexpected situations.

f)CDress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away

from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of dust collection can reduce dust-related

hazards.

h)Do not let familiarity gained from frequent use of tools allow you to become complacent and

ignore tool safety principles. A careless action can cause severe injury within a fraction of a

second.

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application. The correct

power tool will do the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or remove the battery pack, if detachable,

from the power tool before making any adjustments, changing accessories, or storing power

tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with

the power tool or these instructions to operate the power tool. Power tools are dangerous in

the hands of untrained users.

e) Maintain power tools and accessories. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s operation. If

damaged, have the power tool repaired before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these instructions,

taking into account the working conditions and the work to be performed. Use of the power

tool for operations different from those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles

and grasping surfaces do not allow for safe handling and control of the tool in unexpected

situations.

5) Battery tool use and care

a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for

one type of battery pack may create a risk of fire when used with another battery pack.

b) Use power tools only with specifically designated battery packs. Use of any other battery

packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it away from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal objects, that can make a connection from

one terminal to another. Shorting the battery terminals together may cause burns or a fire.

d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or burns.

e)Do not use a battery pack or tool that is damaged or modified. Damaged or modified

batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.

f) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or

temperature above 130 °C may cause explosion.

g)Follow all charging instructions and do not charge the battery pack or tool outside the

temperature range specified in the instructions. Charging improperly or at temperatures

outside the specified range may damage the battery and increase the risk of fire.

6) Service

a) Have your power tool serviced by a qualified repair person using only identical replacement

parts. This will ensure that the safety of the power tool is maintained.

b) Never service damaged battery packs. Service of battery packs should only be performed by

the manufacturer or authorized service providers.

Product specificaties