Ozito PXJSS-600 Handleiding

Ozito Zaagmachine PXJSS-600

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXJSS-600 (8 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
CORDLESS
JIGSAW
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 18V
No Load Speed: 0 - 2,400spm
Stroke Depth: 25.4mm
Bevel: +/- 45°
Blade Fitment: T-Shank
Cutting Capacities: Timber 80mm
Mild Steel 10mm
Plastic 12mm
Weight: 1.85kg
PXJSS-600
WHAT’S IN THE BOX
Jigsaw
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR
TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE
TELEPHONE OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and
for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service
helpline above.
ozito.com.au
0616
WARNING
The following actions will result in the warranty being void.
‱ If the tool has been operated on a supply voltage other
than that specied on the tool.
‱ If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
‱ Failure to perform maintenance as set out within the instruction
manual.
‱ If the tool is disassembled or tampered with in any way.
Battery & Charger
sold separately
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries and chargers
are covered by a 36 month warranty. Warranty excludes
consumable parts, for example: cutting blades.
Dust Extraction Adaptor
Parallel Guide
Line Guide
Splinter Guard
Blade
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
BATTERY & CHARGER (sold separately)
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
WARNING! ENsuRE thE tool Is sWItchEd off ANd
thE bAttERy Is REmovEd bEfoRE pERfoRmING ANy
of thE folloWING tAsks.
CORDLESS JIGSAW
1 2 3 4 5 6 7
8 9 10 11
1 Guide Locking Screw
2 LED Light
3 Blade Lock
4 Lock Off Switch
5 On/Off Trigger
6 Sure Grip Handle
7 Battery Seating
8 Guide Roller
9 Adjustable Shoe
10 Pendulum Action Selector
11 Shoe Locking Lever
ACCESSORIES
12 13 14 15
12 Dust Extraction Adaptor
13 Splinter Guard
14 Parallel Guide
15 Line Guide
Removing the Blade
Inserting the Blade
2 Raise the blade to remove.
2 Slide the blade into the lock
with the teeth facing forward
making sure the blade is in
the middle of the guide roller
groove.
Ensure the shoulder of the
blade sits right at the bottom
of the blade holder.
1 Flip the saw upside
down and hold the
blade lock down.
1 Hold the blade lock
down.
3 Release the blade
lock and pull on the
blade to ensure it is
secured.
Battery Charge Indicator
The purchased battery is equipped with
a battery charge indicator to show the
state of the battery charge.
Press the charge indicator button and
look to see which LED lights.
Battery requires
immediate charging
Low state of charge, requires charging soon.
Mid state of charge
Full state of charge.
Note: The battery needs to be removed from the tool to check the state of
charge.
1 Connect the charger into a mains power outlet.
4 The charger LED will illuminate red signifying that the battery is
charging.
3 With the battery sitting on a at
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the battery
ensuring a rm connection.
2 The charger LED will ash
green showing power is being
supplied to the charger.
5 When removing the charger from
the battery, rst press the battery
release tab, then slide the charger
from its position.
Charging your lithium ion battery - Eco Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Illuminated) Battery is charging (low charge)
GREEN (Illuminated) Battery is fully charged
RED (Flashing) Battery or Charger fault
RED & GREEN (Flashing) Battery pack is too hot or too cold (remove
battery from charger and store at room
temperature 20ÂșC. Insert battery again when at
correct charging temperature). If this happens
again, the battery is defective and needs to be
replaced.
2. BATTERY & CHARGING (sold separately)
The purchased battery will be shipped in a low charge condition, and requires charging
prior to use. Allow several cycles of charging and discharging (through use of the tool)
for the battery to reach its optimum performance / runtime.
cAutIoN: thE chARGER foR thIs pRoduct should
bE pRotEctEd by A REsIduAl cuRRENt dEvIcE
(RAtEd At 30mA oR lEss).
1 Connect the charger into a mains power outlet.
4 The charger LED will illuminate
red signifying that the battery
is charging.
3 With the charger sitting on a
at surface, align the raised
ribs on the battery with the
recess in the charger and slide
onto the charger ensuring a rm
connection.
2 The charger LED will ash
green showing power is being
supplied to the charger.
5 The charger LED will illuminate
green once the battery is fully
charged.
Charging your lithium ion battery - Fast Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Flashing) Battery is charging (low charge)
RED (Illuminated) Battery is charging (mid charge)
GREEN (Illuminated) Battery is fully charged
BOTH(Illuminated) Battery pack is too hot or too cold (charging
will begin automatically when battery reaches
correct charging temperature).
BOTH (Flashing) Defective battery. Never charge a defective
battery pack!
Remove battery pack from charger.

Product specificaties

Merk: Ozito
Categorie: Zaagmachine
Model: PXJSS-600

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PXJSS-600 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Zaagmachine Ozito

Ozito

Ozito JSW-6100U Handleiding

9 Juli 2023
Ozito

Ozito RSW-5200 Handleiding

26 Juni 2023
Ozito

Ozito JSW-4000U Handleiding

24 Juni 2023
Ozito

Ozito JSW-8100U Handleiding

20 Juni 2023
Ozito

Ozito RSW-5200U Handleiding

18 Juni 2023
Ozito

Ozito PXJSS-600U Handleiding

16 Juni 2023
Ozito

Ozito SCMS-10STANDU Handleiding

13 Juni 2023
Ozito

Ozito PXCCSS-0182U Handleiding

13 Juni 2023
Ozito

Ozito PXRSS-400U Handleiding

11 Juni 2023
Ozito

Ozito CSW-7000U Handleiding

9 Juni 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Worx

Worx Nitro WX542.9 Handleiding

26 April 2024
Fieldmann

Fieldmann FZP 25410-B Handleiding

15 April 2024
Milwaukee

Milwaukee M18 BJS Handleiding

10 April 2024
Rona

Rona Standard Plus-C Handleiding

10 April 2024
Rona

Rona Profi-C Handleiding

10 April 2024
Milwaukee

Milwaukee SCS 65 Q Handleiding

10 April 2024
Milwaukee

Milwaukee M12 BS Handleiding

10 April 2024
Milwaukee

Milwaukee M18 FMCS66 Handleiding

10 April 2024
Milwaukee

Milwaukee M18 BSX Handleiding

10 April 2024
Bavaria By Einhell

Bavaria By Einhell BFS 800E Handleiding

9 April 2024