Ozito PXHVS-218 Handleiding

Ozito Niet gecategoriseerd PXHVS-218

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXHVS-218 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 73 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
STANDARD EQUIPMENT
PXHVS-218
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Air Flow: 17L/sec
Suction Power: 72 mbar (7.2kPa)
Dust Capasity: 600ml
Weight: 0.94kg
ozito.com.au
0223
Cordless Vacuum
Brush Tool
Onboard Accessory Holder
2 X Extension Tubes
Wall Holder
Floor Tool
Crevice Tool
2 SPEED
HAND VACUUM
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, VIC 3175, Australia.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
10 11 12
Installing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
Removing The Battery Pack
1. Hold down the battery release
button (a) and then slide the
battery out.(b)
1. Nozzle
2. Dust Container
3. Dust Container Release Button
4. On/Off Switch
5. Sure Grip Handle
6. Battery Seating
This tool is compatible with all batteries & chargers from the Ozito PXC range.
2 SPEED HAND VACUUM
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. FITTING THE BATTERY
SETUP & PREPARATION
1 62 3 4 5
7 8 9
WARNING! ENSURE THE ON/OFF SWITCH IS IN THE
OFF POSITION BEFORE ATTACHING A BATTERY TO
THE TOOL.
ACCESSORIES
7. Brush Tool
8. Cervice Tool
9. Floor Tool
10. 2 x Extension Tubes
11. Wall Holder
12. Onboard Accessory Holder
a
b
Switching On and Off
1. To start the vacuum push the
switch forwards into the Eco
Mode for longer runtime, ideal
for hard oor applications.
2. Push the switch forwards again
to start the Boost Mode for
maximum suction power for
carpet applications.
Attaching Accessories
1. Align the accessory with the
vacuum nozzle and push into
place.
2. To remove simply pull the
accessory away from the vacuum
nozzle.
Note:
Accessories like the Brush Tool, Cervice Tool, Extension Tubes and the Floor
Tool can be attached to the nozzle following the same procedure.
Using The Wall Holder
1. Place the wall holder against
the wall and use the screws to
fasten it on to the wall.
2. Insert the Floor Tool and the
Extension Tubes on the wall
holder to store them.
3. The vacuum can be hung on the
wall holder.
2. ASSEMBLY 3. CONTROLS
OPERATION
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING! DO NOT PUT PART OF YOUR BODY
SUCH AS HANDS AND FINGERS NEAR THE INLET
OPENING OF THE VACUUM.
ECO

Product specificaties

Merk: Ozito
Categorie: Niet gecategoriseerd
Model: PXHVS-218

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PXHVS-218 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Ozito

Ozito

Ozito PXPPS-1820 Handleiding

8 April 2024
Ozito

Ozito PXNGS-218 Handleiding

8 April 2024
Ozito

Ozito PXHTBK-2518 Handleiding

8 April 2024
Ozito

Ozito PSR-5732U Handleiding

16 Maart 2024
Ozito

Ozito PXCLMLTC-418U Handleiding

16 Maart 2024
Ozito

Ozito PXWBS-200U Handleiding

16 Maart 2024
Ozito

Ozito PXDDK-301U Handleiding

16 Maart 2024
Ozito

Ozito PXCPPS-018U Handleiding

16 Maart 2024
Ozito

Ozito WPHGK-2000U Handleiding

16 Maart 2024
Ozito

Ozito PXDDGK-600U Handleiding

16 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024