Ozito PXDCS-018 Handleiding

Bekijk gratis de handleiding van Ozito PXDCS-018 (6 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 22 mensen en kreeg gemiddeld 4.9 sterren uit 6 reviews. Heb je een vraag over Ozito PXDCS-018 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

DESCRIPTION OF SYMBOLS

Right

Left

Warning

Use Gloves

Keep long hair away from rotating

parts

Keep hands away from rotating

parts

Regulatory Compliance Mark

(RCM)

Wear eye, ear & breathing

protection

V

Volts

Ah

Ampere hour

n

0

L

/min

R

Neutral

N

Direct Current

No load speed

Revolutions or reciprocations

per minute

Read Instruction Manual

Power tools that are no longer usable should not be disposed

of with household waste but in an environmentally friendly

way. Please recycle where facilities exist. Check with your local

council authority for recycling advice.

Recycling packaging reduces the need for landll and raw

materials. Reuse of recycled material decreases pollution in the

environment. Please recycle packaging where facilities exist.

Check with your local council authority for recycling advice.

CARING FOR THE ENVIRONMENT

SPARE PARTS

Spare parts can be ordered from the Special Orders

Desk at your local Bunnings Warehouse.

For further information, or any parts not listed here,

visit www.ozito.com.au or contact Ozito Customer

Service:

Australia 1800 069 486

New Zealand 0508 069 486

E-mail: [email protected]

WARNING! BEFORE CLEANING OR CARRYING OUT

ANY MAINTENANCE PROCEDURE, ENSURE THAT

THE BATTERIES HAVE BEEN REMOVED.

Cleaning

• Keep the ventilation slots of the tool clean at all times to ensure efcient

operation.

• After each use, blow air through the tool housing to ensure it is free from

all dust, dirt, etc. Build up of dust or dirt particles may cause the tool to

overheat and shorten the life of the tool.

• If the housing of the tool requires cleaning, do not use solvents. Use of a

cloth only is recommended.

• Never allow any liquid to get inside the tool, never immerse any part of

the tool into liquid.

Storage

When not in use, the tool should be stored in a dry, frost free location, keep

out of children’s reach.

Note: Ozito Industries will not be responsible for any damage or

injuries caused by repair of the tool by an unauthorised person or by

mishandling.

MAINTENANCE

Product specificaties