Ozito PXBIS-320 Handleiding

Ozito Boormachine PXBIS-320

Lees hieronder de đź“– handleiding in het Nederlandse voor Ozito PXBIS-320 (7 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
WHAT’S IN THE BOX
Brushless Impact Driver
Battery & Charger
sold separately
B
R
U
S
H
L
E
S
S
B
R
U
S
H
L
E
S
S
SPECIFICATIONS
Voltage: 18V
No Load Speed: 0-2900/min
Chuck Size: 6.35mm (1/4”) Hex
Impact Rate: 3000bpm
Max. Torque: 180Nm
Weight: 1.2kg
BRUSHLESS
IMPACT DRIVER
INSTRUCTION MANUAL
ozito.com.au
PXBIS-320
1 2 3 4 5
Inserting & Removing the Battery (not included)
1 Align the ribs of the battery with
the recess at the base of the
driver handle and push in until it
clicks into place.
2 To remove, press and
hold the battery release
tab and then slide out.
S
a
b
CAUTION! DO NOT HANDLE ACCESSORIES WITHOUT
GLOVES AS THEY ARE SHARP AND CAN BECOME HOT
AFTER USE, POTENTIALLY CAUSING PERSONAL INJURY.
E
S
S
b
b
S
H
L
E
S
S
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
BATTERY & CHARGER (sold separately)
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
Battery Charge Indicator
The purchased battery is equipped with a
battery charge indicator to show the state of
the battery charge.
Press the charge indicator button and look to
see which LED lights.
Battery requires
immediate charging
Low state of charge, requires charging soon.
Mid state of charge
Full state of charge.
Note: The battery needs to be removed from the tool to check the state of charge.
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Illuminated) Battery is charging (low charge)
GREEN (Illuminated) Battery is fully charged
RED (Flashing) Battery or Charger fault
RED & GREEN (Flashing) Battery pack is too hot or too cold (remove battery from
charger and store at room temperature 20ÂşC. Insert
battery again when at correct charging temperature). If
this happens again, the battery is defective and needs
to be replaced.
4 The charger LED will illuminate
red signifying that the battery is
charging.
5 The charger LED will illuminate
green once the battery is fully
charged.
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Flashing) Battery is charging (low charge)
RED (Illuminated) Battery is charging (mid charge)
GREEN (Illuminated) Battery is fully charged
BOTH (Illuminated) Battery pack is too hot or too cold (charging will begin
automatically when battery reaches correct charging
temperature).
BOTH (Flashing) Defective battery. Never charge a defective battery
pack!
Remove battery pack from charger.


Product specificaties

Merk: Ozito
Categorie: Boormachine
Model: PXBIS-320

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PXBIS-320 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Boormachine Ozito

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine