Ozito CDL-1200 Handleiding

Ozito Boormachine CDL-1200

Bekijk gratis de handleiding van Ozito CDL-1200 (8 pagina’s), behorend tot de categorie Boormachine. Deze gids werd als nuttig beoordeeld door 41 mensen en kreeg gemiddeld 4.5 sterren uit 21 reviews. Heb je een vraag over Ozito CDL-1200 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/8
CORDLESS
DRILL
DRIVER
12V Lithium Ion
INSTRUCTION MANUAL
CDL-1200
WHAT’S IN THE BOX
Cordless Drill Driver
ozito.com.au
Charging Adaptor
SPECIFICATIONS
Input: 12V
Chuck Size: 10mm Keyless
No Load Speed: 0-700/min
Torque Setting: 17
Max. Torque: 10Nm
Battery: 1.5Ah Li-ion
Charge Time: 3-5 Hours
Weight: 0.94 kg
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
9 Charging Adaptor 10 Charging Jack
ACCESSORIES
9 10
1 2 3 4 5 6 7 8 3 The light will turn green when
the battery reaches full charge.
NOTE: It will take 4-5 charging cycles before the battery reaches
optimum charge and run time.
NOTE: The light will illuminate red
when the battery has a low level
of charge remaining.
Adjusting Torque
Variable Speed Trigger
1 To start drilling squeeze the
variable speed trigger.
2 To stop drilling release the
trigger.
Note: The more the variable speed trigger is depressed, the faster the
drill bit will rotate.
Turn torque ring to the
desired setting. Refer to
Helpful Tips for determining
desired setting.
Removing a Drill Bit
4 Tighten the chuck by turning
clockwise.
CAUTION: TO REDUCE THE RISK OF INJURY WE
RECOMMEND THE USE OF GLOVES WHEN HANDLING
DRILL BITS.
5. Ensure the bit is rmly in
place.
1. Hold the back sleeve while
turning the front sleeve
clockwise to open chuck.
2. Remove the drill bit.


Product specificaties

Merk: Ozito
Categorie: Boormachine
Model: CDL-1200

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito CDL-1200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden