Ozito PBMS-3641 Handleiding
Pagina's 11 Grasmaaier
Bekijk de handleiding van Ozito PBMS-3641 gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
PBMS-3641
STANDARD EQUIPMENT
WARRANTY
0726
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
5 YEAR WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: grass catcher,
wheels, blade, bearings.
OZITO 25 Fox Drive , Dandenong South, Victoria 3175, Australia.
BRUSHLESS
LAWN
MOWER
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 2 x 18V
Cutting Diameter: 410mm (16”)
Cutting Heights: 25 - 75mm, 6 position
No Load Speed: 3,400/min
Grass Catcher: 50 litres
Noise Rating: 93dB
Tool Weight: 16.4kg
ozito.com.au
Brushless Lawn Mower
Grass Catcher & Handle
Safety Key
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
15. Safety Key
1. Wheels
2. Battery Cover
3. Power Cable
4. Carry Handle
5. Lower Folding Handle
6. Grass Catcher Flap
7. Upper Folding Handle
8. Start/Stop Lever
9. Lock-Off Button
10. Push Bar
11. Quick-release Lever
12. Grass Catcher
13. Cutting Height Adjustment
14. Cutting Deck
BRUSHLESS LAWN MOWER
KNOW YOUR PRODUCT
1
9
2
11
3
12
45678
15
1. ASSEMBLY
SETUP & PREPARATION
The handle in folded in the transport position when packed in the box.
Folding Handle
WARNING!ENSURE THE LAWN MOWER IS SWITCHED
OFF AND BATTERIES ARE DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
ACCESSORIES
BATTERY & CHARGER
This tool is compatible with all batteries and chargers from
the Ozito PXC Range.
2. Before raising the handle
assembly, lock the two
upper quick-release
levers. Only turn the
quick-release lever in
each case so far on the
thread so that it can still
be ipped towards the
closed position again.
3. Ensure one of the three available
positions is selected correspond to
the Height Adjustment Line. And
the handle and the mower housing
make rm contact. As you make
your selection, make sure that both
sides are set to the same position.
13
14
3
2
1
Height Adjustment Line
4. You can adjust the height of the
push bar by ipping open the
two quick-release levers with
three settings available for the
height. As you do this, make
sure that both sides are set to
the same position. To secure
the handle again, ip the two
quick release levers back into
the closed position.
3
2
1
OPEN
CLOSED
10
1. To unfold, ip outwards the
four handle quick-release
levers on either side of the
mower. If necessary, turn
the quick-release lever back
sufciently on the thread so
that the handle quick-release
lever can then still be ipped
outwards.
OPEN
CLOSED
Lock
Lock
2. BATTERY & SAFETY KEY
1. Lift up the grass catcher ap with
one hand and guide the catcher
with your other hand over the two
hooks on the mower housing.
3. To remove, raise the grass catcher ap and lift the grass catcher up
and out.
2. Lower the grass catcher and
allow it to sit in place. Lower
the grass catcher ap.
Fitting and Removing the Grass Catcher
WARNING! ONLY FIT AND REMOVE THE CATCHER
WHEN THE MOWER IS SWITCHED OFF AND THE
MOTOR HAS COME TO A STOP.
Note:The grass catcher ap is held against the grass catcher under
tension.
Grass Catcher Handle Assembly
1. The handle will click into position
when aligned and tted correctly.
WARNING! WHEN FITTING THE GRASS CATCHER AFTER
EMPTYING, ALWAYS ENSURE THERE IS NO BUILD UP
OF GRASS IN THE GRASS CHUTE.
Grass Catcher Indicator
The grass catcher is tted with an
indicator at the rear of the catcher to
help identify when to empty.
If the indicator drops down while
operating then the grass catcher is
full and needs emptying.
2. Insert the safety key.
(If the mower is not going to be
used immediately, do not insert
the safety key.)
1. Carefully lift open the battery
cover and slide two batteries of
the same capacity (Ah) and same
charge state into the mower,
aligning the mounts so that they
click into place.
3. Carefully close the battery cover.
Inserting Batteries & Safety Key
Only use 2 batteries with the same capacity (Ah). For best performance
use 3.0Ah batteries and above. Always use 2 batteries with the same
charge state with the mower.
1. Lift open the battery cover.
Press the battery release tab
and remove the battery.
2. Carefully close the battery
cover.
Removing the Batteries from the Mower
Run Time
The operating time of the PXC battery (the area in square meters that
can be covered with a single battery charge) is largely dependent on the
state of the grass (e.g. Density, moisture, height, etc.) the lawn mower
cutting height position and your walking speed.
Frequently turning the equipment on and off while mowing will also
reduce the amount of area that you can cover. If the operating time of
the PXC battery (area coverage) is still unsatisfactory in spite of the
above measures, you can remedy the problem by using PXC battery with
a larger capacity (Ah).
WARNING! ALWAYS ENSURE THE SAFETY KEY AND
ALL BATTERIES ARE REMOVED WHEN NOT IN USE.
Secure the Power Cable
1. Join the two ends of the
power cable together,
noting the position of the
three internal pins.
2. Screw the cap onto the
thread to secure.
Product specificaties
| Merk: | Ozito |
| Categorie: | Grasmaaier |
| Model: | PBMS-3641 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito PBMS-3641 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden