Ozito PBMK-4236 Handleiding
Pagina's 13 Grasmaaier
Bekijk de handleiding van Ozito PBMK-4236 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
PBMS-3642
Brushless Lawn Mower
Safety Key & Cable Clips
Grass Catcher
Lower Handles
Handle Assembly Fasteners
STANDARD EQUIPMENT
WARRANTY
0526
BRUSHLESS
LAWN
MOWER
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 2 x 18V
Cutting Diameter: 420mm (16”)
Cutting Heights: 25 - 75mm, 6 position
No Load Speed: 3,100/min
Grass Catcher: 50 litres
Noise Rating: 94dB
Tool Weight: 16.4kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
5 YEAR WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: wheels, blade,
cord clips, bearings etc.
OZITO.25 Fox Drive, Dandenong South, Victoria 3175, Australia
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
13. Safety Key14. Handle Securing Knob & Bolt x 2
1. Wheel
2. Battery Cover
3. Cord Clip x 2
4. Catcher Flap
5. Power Cord
6. Lock-off Button
7. Start/Stop Lever
8. Upper Handle
9. Handle Securing Set x 2
10. Lower Handle x 2
11. Grass Catcher
12. Cutting Deck
BRUSHLESS LAWN MOWER
KNOW YOUR PRODUCT
1
9
23
14
45678
13
1. ASSEMBLY
SETUP & PREPARATION
1. Place the lower handles over
the outside of the mower
handle brackets.
Fitting the Lower Handle
Securing the Cord
WARNING!ENSURE THE TOOL IS SWITCHED OFF AND
BATTERIES ARE DISCONNECTED BEFORE PERFORMING
ANY OF THE FOLLOWING TASKS.
ACCESSORIES
BATTERY & CHARGER
This tool is compatible with all batteries and chargers from
the Ozito PXC Range.
Fitting the Upper Handle
1. Place the Upper Handle over the outside ends of the Lower Handles.
2. From the Handle
Securing Set, t the
bolt from the inner
side of the lower
handles and then
through the Upper
Handle.
3. Secure in place
with washer and by
screwing the Knob
over the protruding
ends of the bolts.
2. Select one of the three holes
in each bracket appropriate
for the height of the user.
3. Using the Handle Securing
Knob & Bolt, insert the Bolt
from the outside and secure
by screwing the Knob over the
protruding ends of the bolts.
Ensure the cord follows the
handles smoothly from the
switch to the body of the
mower.
1. Place the supplied cord
clips over the cord. Push the
cord clip onto the handle to
secure in place.
10
11
12
9
3
Note:The same height must be set on both sides of the mower.
Note:Care should be taken
not to impinge power cord
when folding down the handle.
2. PREPARATION
1. Carefully lift and hold open the
battery cover.
Note:The cover is kept securely
closed by magnets.
3. Insert the safety key.
(If the mower is not going to be
used immediately, do not insert
the safety key.)
1. Lift up the grass catcher ap
with one hand and guide the
catcher with your other hand
over the two hooks on the
mower housing.
3. To remove, raise the grass catcher ap and lift the grass catcher out.
4. Carefully close the battery
cover.
2. Lower the grass catcher and
allow it to sit in place. Lower
the grass catcher ap.
Inserting the Batteries & Safety Key
Adjusting the Cutting Height
WARNING! ONLY FIT AND REMOVE THE GRASS
CATCHER WHEN THE MOWER IS SWITCHED OFF AND
THE MOTOR HAS COME TO A STOP.
Note:The grass catcher
ap is held against the grass
catcher by a spring.
The cutting height adjustment lever provides 6 cutting heights
from 25mm - 75mm.
1. Pull lever outwards away
from the mower body.
2. Adjust until the required
cutting height is selected.
3. Release lever and check
that it is securely seated in
the required cutting height
position.
Only use 2 batteries with the same capacity. For best performance
use 3.0 Ah batteries and above. Always use 2 batteries with the same
charge state with the mower.
WARNING! WHEN FITTING THE GRASS CATCHER AFTER
EMPTYING, ALWAYS ENSURE THERE IS NO BUILD UP
OF GRASS IN THE GRASS CHUTE.
Grass Catcher Indicator
The grass catcher is tted with
an indicator at the rear of the
catcher to help identify when
to empty.
When in operation the airow
oats up the indicator when
the catcher is empty. If the
indicator drops down, then the
grass catcher is full and needs
emptying.
WARNING!ENSURE THE TOOL IS SWITCHED OFF AND
BATTERIES ARE DISCONNECTED BEFORE PERFORMING
ANY OF THE FOLLOWING TASKS.
Fitting and Removing the Grass Catcher
WARNING!NEVER LEAVE THE BATTERIES INSIDE THE
MOWER WHEN MOWER IS NOT IN USE.
2. Slide two batteries of the same
capacity and same charge state
into the mounts, aligning the
ribs so that they click into place.
Product specificaties
| Merk: | Ozito |
| Categorie: | Grasmaaier |
| Model: | PBMK-4236 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito PBMK-4236 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden