Ozito OTAC-1570 Handleiding
Ozito
Compressor
OTAC-1570
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito OTAC-1570 (6 pagina's) in de categorie Compressor. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
12V T WIN CYLINDER AIR COMPRESSOR
12V TWIN CYLINDER
AIR COMPRESSOR
70L/MIN 145PSI
INSTRUCTION MANUAL
SPECIFICATIONS
Power: 276W
Input: 12V DC
Max. Current: 30A
S3: 25%
Flow Rate: 70L/min
Max. Pressure: 145psi (10bar)
Hose Length: 4m
Weight: 2.97kg
OTAC-1570
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: valve adapters
and accessories.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
12V TWIN CYLIN DER AIR COMPR ES S OR
12V Twin Cylinder Air Compressor
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
4 6
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRESSURE GAUGE
kg/cm²
3 x Inflation Nozzles, Replacement
Fuse & Air Hose
Carry Bag
1219
ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
ON OFF
12V TWIN CYLINDER AIR CO MPR ESSOR
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
46
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRESSURE GAUGE
kg/cm²
Attaching The Air Hose
1. Retract and hold the sleeve
of the Nitto coupler on the air
hose.
2. Insert the Nitto tting of the
tool hose and release the
Nitto coupler sleeve. The Nitto
coupling should click into
place.
3. Check that the tting is secure by tugging gently on the connector.
If the hose detaches, repeat steps 1 & 2, pushing the Nitto tting
rmly into the coupler.
Using An Ination Nozzle
There is a storage container on the unit for the ination nozzles when
not they are not in use.
1. Pull o the lid on the nozzle
storage compartment.
2. Select the appropriate ination nozzle based on the air inlet of the
object to be inated.
3. Screw the ination nozzle
onto the tyre chuck on the air
hose.
1. On/O Switch
2. Nozzle Storage Container
3. Carry Handle
4. Tool Hose
5. Quick Connect Hose Fitment
6. Battery Terminal Clamp (+)
7. Battery Terminal Clamp (-)
8. Inline Fuse
12V TWIN CYLINDER AIR COMPRESSOR
ACCESSORIES
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
9. 3 x Ination Nozzles
10. Replacement Fuse
11. Quick Connect Hose Fitment
12. Pressure Hose
13. Pressure Gauge
14. Tyre Chuck
a.
b.
2
11 13
4
3
9 10 12
1
78
14
6 5
WARNING! ENSURE THE TOOL IS TURNED OFF
AND DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
Connecting The Compressor To A Car Battery
1. Ensure the on/o switch is in
the o ‘0’ position.
2. With the car engine running,
connect the red battery
terminal clamp to the positive
(+) pole on your vehicle
battery.
3. Connect the black battery
terminal clamp to the negative
(-) pole on your vehicle
battery.
Disconnecting The Compressor From The Power Source
1. Turn o the air compressor by ipping the on/o switch to the o ‘0’
position.
2. Remove the black battery
terminal clamp from the
negative (-) pole of your
vehicle battery.
3. Remove the red battery
terminal clamp from the
positive pole (+) of the vehicle
battery.
Starting The Air Compressor
1. To turn on the air compressor,
press the on/o switch to the ‘I’
position.
Note: You may experience a slight
delay (approximately 0.5 seconds)
between the on/o switch being
ipped and the motor unit turning on.
This is a normal function while the
compressor pressurises the air in the hose.
2. To turn the unit o, press the on/o switch to the ‘0’ position.
Inline Fuse Protection
The air compressor is equipped with a 30A fuse between the unit and
the clamps. This feature is designed to protect you and the unit from
excessive current surges. If the fuse breaks during use, follow the
steps below to replace it.
1. Flip the on/o switch to the o
position, disconnect the black
clamp and then the red clamp
from the battery.
2. Flip open the lid on the fuse
housing. Remove the old fuse
and replace it with the supplied
replacement.
3. Replace the fuse housing lid.
WARNING! DO NOT CONTINUE USE OF THE UNIT IF
THE FUSE BREAKS AGAIN ON USE IMMEDIATELY
AFTER BEING REPLACED. THERE MAY BE A FAULT
WITH THE UNIT; CONTACT OZITO CUSTOMER
SERVICE.
In-Line Pressure Gauge
The in-line pressure gauge allows you to
conveniently monitor the air pressure in
the object during ination/deation without
needing to change between accessories.
Note: You will need to momentarily halt
ination/deation in order to obtain accurate
pressure readings as air owing in the hose
may throw o the readings.
2. APPLYING A POWER SOURCE 3. CONTROLS
OPERATION
+ -
+ -
a.
b.
+ -
ON OFF
ON OFF
a.
b.
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
46
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRESSURE GAU GE
kg/cm ²
WARNING! KEEP THE VEHICLE ENGINE RUNNING
WHILE USING THE AIR COMPRESSOR TO
PREVENT DISCHARGING THE VEHICLE BATTERY
COMPLETELY.
WARNING! ONLY USE THE AIR COMPRESSOR IN
WELL VENTILATED AREAS.
WARNING! ENSURE THE POWER CORD IS
UNCOILED AND FULLY EXTENDED TO AVOID
OVERHEATING THE POWER CORD. ENSURE
THAT IT DOES NOT GET TANGLED OR CAUGHT
IN ANY ROTATING PARTS WITHIN THE ENGINE
COMPARTMENT OF THE VEHICLE.
Product specificaties
| Merk: | Ozito |
| Categorie: | Compressor |
| Model: | OTAC-1570 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito OTAC-1570 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Compressor Ozito
8 April 2024
16 Maart 2024
16 Maart 2024
29 Augustus 2023
28 Mei 2023
22 Mei 2023
20 Mei 2023
18 Mei 2023
16 Mei 2023
29 Maart 2023
Handleiding Compressor
- Compressor Bosch
- Compressor Xiaomi
- Compressor AEG
- Compressor DeWalt
- Compressor Airpress
- Compressor Bavaria
- Compressor Boss
- Compressor Danfoss
- Compressor Duro
- Compressor Einhell
- Compressor Emax
- Compressor Eufab
- Compressor Ferm
- Compressor Festool
- Compressor Global
- Compressor Gude
- Compressor Hikoki
- Compressor Hitachi
- Compressor Holzmann
- Compressor Hyundai
- Compressor Kibani
- Compressor Laica
- Compressor Livoo
- Compressor Makita
- Compressor Merlin
- Compressor Metabo
- Compressor Milwaukee
- Compressor Nilfisk
- Compressor Parkside
- Compressor Powerplus
- Compressor Robust
- Compressor Samson
- Compressor Scheppach
- Compressor Silvercrest
- Compressor Silverline
- Compressor Stanley
- Compressor Technaxx
- Compressor Toolcraft
- Compressor Topcraft
- Compressor Trotec
- Compressor Ultimate Speed
- Compressor Vonroc
- Compressor Westfalia
- Compressor WilTec
- Compressor Workzone
- Compressor Zipper
- Compressor OKAY
- Compressor Omnitronic
- Compressor Osram
- Compressor Black And Decker
- Compressor Steren
- Compressor Cocraft
- Compressor Draper
- Compressor Meec Tools
- Compressor Senco
- Compressor Hamron
- Compressor Aerotec
- Compressor Contimac
- Compressor HBM
- Compressor Power Craft
- Compressor Tacklife
- Compressor Truper
- Compressor Fieldmann
- Compressor Biltema
- Compressor Porter-Cable
- Compressor Sun Joe
- Compressor Dedra
- Compressor Herkules
- Compressor Sthor
- Compressor Craftsman
- Compressor Alphacool
- Compressor Freeman
- Compressor Pretul
- Compressor Hazet
- Compressor Full Boar
- Compressor Yato
- Compressor Avantco
- Compressor Auto Joe
- Compressor Unimac
- Compressor PreSonus
- Compressor Carel
- Compressor Outbac
- Compressor Golden Age Project
- Compressor Abac
- Compressor DBX
- Compressor SPL
- Compressor Lindell Audio
- Compressor Arebos
- Compressor POWERNAIL
- Compressor Pansam
- Compressor Narvon
- Compressor Airman
- Compressor Pro-Lift
- Compressor Aomni
- Compressor Numax
- Compressor TOOLMATE
- Compressor California Air Tools
- Compressor Ilsco
- Compressor Hulk Power
- Compressor Cartrend
- Compressor Prowork
- Compressor Proviel
- Compressor Creemers
- Compressor ExelAir
- Compressor TJM
Nieuwste handleidingen voor Compressor
9 April 2024
9 April 2024
9 April 2024
3 April 2024
27 Maart 2024
27 Maart 2024
25 Maart 2024
16 Maart 2024
16 Maart 2024
16 Maart 2024